E-Nano from Epickai
DarkSm0ke
Well-Known Member
Hello Everyone! Hope you all are enjoying the holiday weekend! Just vaped some Donkey Kong from my Walnut nano. Starting to feel a heavy blanket across my chest...
So I have a couple of questions for you before typing becomes, uhh difficult, lol.
1) The last adjustable glass stems and adjustable GonG I got from Epic with the new cool silicone guards seem to not fit so well on my ss stem. If I turn the glass stem I can find to where it will go down on to the ss stem of the nano. I have some older stems that slide on and off easily. I don't have to dick with it like the new ones I just got. Maybe the ss stem has expanded? I have been leaving it on for longer periods of time now. Is this normal that the stems are difficult to mate with the ss stem? Like I said my older stems adjustable and glass fixed slide on and off easily.
2) I got some hash, and I want to try it. In the good old days, we would either heat it a bit with a lighter and "fluff" it up with a razor blade, then smoke it in a pipe or stick it with a pin under the cover of a paperback book, light it and then do the old sliding glass trick on the cover. Should I just break a piece off and throw it in the bubbler and use the nano, or "fluff" it up and use it like that in a "flower sandwich"?
I don't want to waste any trying to figure out the best extraction method.
Sorry for the long winded post. I'm kinda faded from the Donkey Kong!
So I have a couple of questions for you before typing becomes, uhh difficult, lol.
1) The last adjustable glass stems and adjustable GonG I got from Epic with the new cool silicone guards seem to not fit so well on my ss stem. If I turn the glass stem I can find to where it will go down on to the ss stem of the nano. I have some older stems that slide on and off easily. I don't have to dick with it like the new ones I just got. Maybe the ss stem has expanded? I have been leaving it on for longer periods of time now. Is this normal that the stems are difficult to mate with the ss stem? Like I said my older stems adjustable and glass fixed slide on and off easily.
2) I got some hash, and I want to try it. In the good old days, we would either heat it a bit with a lighter and "fluff" it up with a razor blade, then smoke it in a pipe or stick it with a pin under the cover of a paperback book, light it and then do the old sliding glass trick on the cover. Should I just break a piece off and throw it in the bubbler and use the nano, or "fluff" it up and use it like that in a "flower sandwich"?
I don't want to waste any trying to figure out the best extraction method.
Sorry for the long winded post. I'm kinda faded from the Donkey Kong!
CarolKing
Singer of songs and a vapor connoisseur
@DarkSm0ke You probably wouldn't know about these things but it's like a woman putting on a pair of Spanx.
Its a type of undergarment that works like the old fashioned girdles. Roll the guard down, then roll down onto the stem. I didn't think it was super easy but it was done in a minute or two. The older stem guards might be stretched out already, maybe that's why it seemed easier.
Its a type of undergarment that works like the old fashioned girdles. Roll the guard down, then roll down onto the stem. I didn't think it was super easy but it was done in a minute or two. The older stem guards might be stretched out already, maybe that's why it seemed easier.
beiberhole69
Sexual Maven
SS means stainless steel, right? @DarkSm0ke is talking about the heating stem, not silicone protectors
Gray Area
Well-Known Member
@DarkSm0ke if the glass doesn't fit over the heater stem, then it's dodgy glass.
There was a batch a while ago that were a bit wonky and didn't fit the heater well (I had one).
I did think that had been sorted though tbh. If it's a new stem from a recent order I'd contact Andy and he'll sort you out a new one no prob
There was a batch a while ago that were a bit wonky and didn't fit the heater well (I had one).
I did think that had been sorted though tbh. If it's a new stem from a recent order I'd contact Andy and he'll sort you out a new one no prob
ataxian
PALE BLUE DOT
I missed my NANO when I was out at sea.It would be great to test it out on July 4th. A great holiday to vape on and have a few beers.
I knew you were getting one
For the $ if you like $?
The NANO is hands down the best unit available!
I'm been on a SHATTER VOYAGE.
However COLAS (FLOWERS) in a NANO through a BUBBLER = DEVASTATION!
PLATINUM OG is basic however friendly!
We all need friend's!
I forgot my beer however my cup ran over with wine!
Love being on solid ground, at least I did not get sick.
Vacation from a vacation?
Making up the right way!
Last edited:
BabyFacedFinster
Anything worth doing, is worth overdoing.
I missed my NANO when I was out at sea.
For the $ if you like $?
The NANO is hands down the best unit available!
I'm been on a SHATTER VOYAGE.
However COLAS (FLOWERS) in a NANO through a BUBBLER = DEVASTATION!
PLATINUM OG is basic however friendly!
We all need friend's!
I forgot my beer however my cup ran over with wine!
Love being on solid ground, at least I did not get sick.
Vacation from a vacation?
Making up the right way!
Holy shit @ataxian, Nice fish!
I've taken some vacation time also, but I do like coming home, crashing on the couch and sleeping in our own bed.
I like cold beer in the summertime, and a few bowls here and there. I don't take the nano on trips so I depend on a few portables.
ataxian
PALE BLUE DOT
Don't FUCK with me? (6th degree Black Belt?)
I'll FUCK with you @BabyFacedFinster !
Fighting is fun!
NANO GonG full of CANNABIS x 3 = BLISS
INVERT-ER for long road trips!
I hate portables.
OK I lied = WAX PENS full of SHATTER when I'm with family.
Last edited:
beiberhole69
Sexual Maven
dropped the stem after clearing a rip and broke a sliver out of the bottom part.
It still hits, but I guess I'll get one of those fancy glow in the dark ones now.
It still hits, but I guess I'll get one of those fancy glow in the dark ones now.
CarolKing
Singer of songs and a vapor connoisseur
The Enano stems seem very sturdy and well built with that thick glass. If that would have been an Air stem it probably would have broken @beiberhole69 I have broken a couple of Enano stems when they broke right at the seam with the fixed glass stem.
I haven't broken an adjustable stem yet and it's been over a year since I bought my nano. I've dropped them a couple times, then held my breath.
I'm really happy with the new silicone guards. it really spruces up the old stems.
I haven't broken an adjustable stem yet and it's been over a year since I bought my nano. I've dropped them a couple times, then held my breath.
I'm really happy with the new silicone guards. it really spruces up the old stems.
The Natty Leprechaun
Well-Known Member
I just got my E Nano I was just sitting down for lunch and got a knock on the door O yeah
I un packed it and I can't believe how small it is the box for the cord was twice the size of the box for the Nano nothing wrong with that I wanted something easily concealable . I plugged it in and am finishing my lunch it is probably warmed up nice by now and my plate is almost clear Happy Friday everyone .
I will post later tonight how my first experience with my new Nano goes
I un packed it and I can't believe how small it is the box for the cord was twice the size of the box for the Nano nothing wrong with that I wanted something easily concealable . I plugged it in and am finishing my lunch it is probably warmed up nice by now and my plate is almost clear Happy Friday everyone .
I will post later tonight how my first experience with my new Nano goes
Jimmer144
Sargeant REG
I remember the day mine came in the mail, i noticed the same thing that when i opened the box for what i thought was the Nano itself, it actually held the cord. I was pleasantly surprised at how small the unit is. Your gonna love it once it you get this thing dialed in and packed correctly, it does take some fiddling. Remember it will run hotter if you plug it into an outlet with nothing else plugged into it. Btwn levels 6.2-6.7 on the dial is my sweet spot. Enjoy!
beiberhole69
Sexual Maven
CarolKing
Singer of songs and a vapor connoisseur
My stems have been the PVHES mouthpieces from Planetvape that have broken, not the small stock stems that come with the AA, I don't use those much. Love how the PV stems work but they are on the thin side. Whereas I've dropped my Enano adjustable stems with no breaks. Now the fixed glass screen stems are a different story. They break right where the glass screen is.
Have some GrapeApe in my Enano along with the j hook. Tastes mighty nice and that grape taste is awesome. Lovin my nano this summer evening. Sitting on the back porch. No new Bill Maher tonight, it's a rerun.
Have some GrapeApe in my Enano along with the j hook. Tastes mighty nice and that grape taste is awesome. Lovin my nano this summer evening. Sitting on the back porch. No new Bill Maher tonight, it's a rerun.
Last edited:
Ace of Space
Well-Known Member
Goodmorning all,
Praise to the Epic customer service!
I broke my gong, so i ordered an adjustable and a fixed one. They arrived a couple of days later on my doorstep in The Netherlands, nice, but the fixed one cracked on heatup...
I sent in a picture, and 3 days later, a new one arrived.
I managed to break both of my new gongs within a couple of weeks (new kitchen countertop, granite, doesn't like glass bubbler parts lol)
So this week i ordered new gongs, and again, 3 days after ordering i'm already enjoying them!
So a big thank to Andy and Carissa for picking things up at lightspeed, and it's just great to see such swift delivery to the other side of the ocean with the cheapest shipping option
Praise to the Epic customer service!
I broke my gong, so i ordered an adjustable and a fixed one. They arrived a couple of days later on my doorstep in The Netherlands, nice, but the fixed one cracked on heatup...
I sent in a picture, and 3 days later, a new one arrived.
I managed to break both of my new gongs within a couple of weeks (new kitchen countertop, granite, doesn't like glass bubbler parts lol)
So this week i ordered new gongs, and again, 3 days after ordering i'm already enjoying them!
So a big thank to Andy and Carissa for picking things up at lightspeed, and it's just great to see such swift delivery to the other side of the ocean with the cheapest shipping option
The Natty Leprechaun
Well-Known Member
I am very Happy with my new E Nano the pure flavor is what I was looking for .
I have been without a vape for a few weeks I had to send My new FF2 in for warranty and this little Nano hit the spot yesterday for sure .I was quickly reminded of how delicious a pure convection vape designed to release the best flavor is where it is at for me.
I am so happy that I don't have to use dirty combustion to medicate anymore FuckCombustion .
I will give this Nano a lot of use this weekend and get it dialed in just right I like 6.5 so far I cant believe how small changes on the dial make a big difference I noticed a slightly harsher than normal puff last night and realized the dial accidently went from 6.5 to a little above 7 back down to 6.5 and a fresh pack and Boom that's the Stuff!!!
The free shipping was fast too from the time they processed my order after the holiday weekend and then was delivered to me was quicker than I was expecting just in time for the weekend
I ordered the regular walnut not the premium and this piece is very nice! The grain pattern and quality made in USA craftsmanship and attention to detail that has a good Vibe too it's not just some mass produced molded plastic shell, not to disrespect any other vapes some of the ones with a lot of plastic I just didn't feel was for me
I have some nice pieces of walnut and just enough wood working tool's and a hole saw bit with a stand for my new E Nano's name all over it maybe if I get the chance that will be my weekend project
I wanted to post a review last night but I was just enjoying that feeling of being Well medicated that I was missing
I have been without a vape for a few weeks I had to send My new FF2 in for warranty and this little Nano hit the spot yesterday for sure .I was quickly reminded of how delicious a pure convection vape designed to release the best flavor is where it is at for me.
I am so happy that I don't have to use dirty combustion to medicate anymore FuckCombustion .
I will give this Nano a lot of use this weekend and get it dialed in just right I like 6.5 so far I cant believe how small changes on the dial make a big difference I noticed a slightly harsher than normal puff last night and realized the dial accidently went from 6.5 to a little above 7 back down to 6.5 and a fresh pack and Boom that's the Stuff!!!
The free shipping was fast too from the time they processed my order after the holiday weekend and then was delivered to me was quicker than I was expecting just in time for the weekend
I ordered the regular walnut not the premium and this piece is very nice! The grain pattern and quality made in USA craftsmanship and attention to detail that has a good Vibe too it's not just some mass produced molded plastic shell, not to disrespect any other vapes some of the ones with a lot of plastic I just didn't feel was for me
I have some nice pieces of walnut and just enough wood working tool's and a hole saw bit with a stand for my new E Nano's name all over it maybe if I get the chance that will be my weekend project
I wanted to post a review last night but I was just enjoying that feeling of being Well medicated that I was missing
Last edited:
hafalump
Well-Known Member
Anyone having trouble with getting a RMA? The outlet at the base of the unit has come loose.
The pins are wiggley. I would like to get this serviceed under warranty, but I am having trouble with the web site. If I call will I get an RMA?. @ACE OF VAPE ?
The pins are wiggley. I would like to get this serviceed under warranty, but I am having trouble with the web site. If I call will I get an RMA?. @ACE OF VAPE ?
CarolKing
Singer of songs and a vapor connoisseur
Epicvape is on the West Coast of the U.S. They won't be open until Monday morning, so call then.
I have some Black Cherry Cola in my Enano tonight, some areas call this Cherry Pie. What's going on in your nano?
You can make an herb and concentrate sandwich. Just use a piece of wax in between some cannabis. You can increase your heat by a 1/2 a degree. If you normally are at 6.5 go up to 7. If you need to go higher temp wise it's your choice.
I've never combusted. Some folks say they have at 7.5. It maybe could have if the cannabis was exceptionally dry, then giving it a hard draw.
I have some Black Cherry Cola in my Enano tonight, some areas call this Cherry Pie. What's going on in your nano?
You can make an herb and concentrate sandwich. Just use a piece of wax in between some cannabis. You can increase your heat by a 1/2 a degree. If you normally are at 6.5 go up to 7. If you need to go higher temp wise it's your choice.
I've never combusted. Some folks say they have at 7.5. It maybe could have if the cannabis was exceptionally dry, then giving it a hard draw.
Last edited:
BabyFacedFinster
Anything worth doing, is worth overdoing.
Yeah man
I also love that I can say "fuck" whenever I like on this forum. Fuck Fuck Fuck !
So, I can't get concentrates around me, only flower. I just ordered a hair straightener, a clamp and some parchment paper. I going to give homemade rosin a shot.
If it works it will be the first time I will try a concentrate in my nano (other than a little kief on top)
So if I remember some prior posts here, I could melt a drop or two on top of some herb or soak a small piece of hemp and stick it in my gong. Right? Then how much higher would you set your dial compared to when you normally vape flower?
Fuck
P.S. I'm vaping some Cheese right now
ataxian
PALE BLUE DOT
4 five days I have been laughing at everything said to me?Yeah man
I also love that I can say "fuck" whenever I like on this forum. Fuck Fuck Fuck !
So, I can't get concentrates around me, only flower. I just ordered a hair straightener, a clamp and some parchment paper. I going to give homemade rosin a shot.
If it works it will be the first time I will try a concentrate in my nano (other than a little kief on top)
So if I remember some prior posts here, I could melt a drop or two on top of some herb or soak a small piece of hemp and stick it in my gong. Right? Then how much higher would you set your dial compared to when you normally vape flower?
Fuck
P.S. I'm vaping some Cheese right now
SHATTER I love a lot.
I always made it with 7x BUTANE, Purge x 3 = Par-Take
It's so cheap now why go through the trouble to make it?
My NANO is at 7.25 with a Cotton Ball of SHATTER
I used water path for my SHATTER LIFE so CIVILIZED!
LIFE = Is Good = CIVILIZED
Vapor_Eyes
taste buds
Maybe set your dial about .5 above what you normally use. It's hard to say as if you're a low temp vaper you might need to bump it up more than that, and if a high temp vaper you might need to bump it up less.
I find 7-8 to be a good range on the dial, although you probably won't need to go over 7.5. Higher temps give bigger hits but the flavor drops off faster.
I actually took a few hits of shatter in a cotton ball at temp 10 the other day. I had turned it up to max to warm it faster, and forgot to lower it before hitting it. It took me a few hits to notice too. Surprisingly the cotton didn't combust and only browned slightly.
I've done this twice with flowers and barely combusted (no cherry or ash), and I could tell as soon as I hit it that something was wrong. Soon enough to stop hitting before it fully combusted, but not soon enough to avoid that horrible taste of smoke. An immediate cleaning of the stem was required in those cases.
Last edited:
ataxian
PALE BLUE DOT
I have a little SHATTER (OK I love SHATTER)
7.25 normally (my level)
6.25 flowers colas (my level)
I would love combustion! (Don't like it)
VAPORIZING = CIVILIZED
NANO = REALLY CIVILIZED
Poostuff
Please delete
Mine went through ok, of course it's not a fun time without the Nano but I bought a Sub to tide me over until it gets back so I'm doing just fine atm.
CarolKing
Singer of songs and a vapor connoisseur
Hey Enano fans. Some Candyland hit the spot earlier today. Have been trying out a new grinder. I'm using some GrapeApe right now - Indica for nighttime. Flavor all the way with the nano. A clean stem makes your cannabis vapor taste better.
I'm trying out a slightly more coarse grind. I hadn't realized until someone had mentioned that you need to have a slightly higher temp if something else is plugged in at the same outlet. Good information to have.
I like my new aroma therapy cup. I've been using sugar cane and vanilla pear scented oils using my walnut nano as an aroma therapy device today.
Good luck @Poostuff I'm sure Epicvape will take care of you.
I'm trying out a slightly more coarse grind. I hadn't realized until someone had mentioned that you need to have a slightly higher temp if something else is plugged in at the same outlet. Good information to have.
I like my new aroma therapy cup. I've been using sugar cane and vanilla pear scented oils using my walnut nano as an aroma therapy device today.
Good luck @Poostuff I'm sure Epicvape will take care of you.
Last edited: