E-Nano from Epickai

[throwawaytre3s]

I just wanted to say that I don't really necessarily care about clouds that much, they're nice, but I'm more about the efficiency. Just because you aren't seeing tons of visible vapor (although lately, with adjusted screen and leaving it on for a few days now, turning it down at night, doesn't mean it isn't hitting. I've been getting pretty good off mine. Also the vapor production has improved, I think I've got my technique down pat now. On the bright side, my d022 comes in today!

 

[BabyFacedFinster]

I understand that I'm still getting medicated during those times when I don't see a nice cloud... but I still like a nice cloud

I'm a low level thinker however making a old broken stem work with some @DDave kit stuff is kind of cool!
However I need some GonG's soon!

Hey @ataxian , when are you going to invite us over for a pool party?

I'll bring some Frito's and my pet I just washed him, I promise.

 

[ataxian]

I understand that I'm still getting medicated during those times when I don't see a nice cloud... but I still like a nice cloud



Hey @ataxian , when are you going to invite us over for a pool party?

I'll bring some Frito's and my pet I just washed him, I promise.

I am setting up a water path with old parts.
I leave my NANO on outside in my garden.
Like I said before I need some GonG's.
However I like the creative challenge to medicate!

 

[Pjake]

I just wanted to say that I don't really necessarily care about clouds that much, they're nice, but I'm more about the efficiency. Just because you aren't seeing tons of visible vapor (although lately, with adjusted screen and leaving it on for a few days now, turning it down at night, doesn't mean it isn't hitting. I've been getting pretty good off mine. Also the vapor production has improved, I think I've got my technique down pat now. On the bright side, my d022 comes in today!

Let the learning curve begin....again!!

I find it's harder to learn good technique through water. But the good kind of harder!! Have fun with the glass man!

 

[ren.dnb]

I just wanted to say that I don't really necessarily care about clouds that much, they're nice, but I'm more about the efficiency. Just because you aren't seeing tons of visible vapor (although lately, with adjusted screen and leaving it on for a few days now, turning it down at night, doesn't mean it isn't hitting. I've been getting pretty good off mine. Also the vapor production has improved, I think I've got my technique down pat now. On the bright side, my d022 comes in today!

I've followed the tips and tricks from everyone on here (sweet spot setting right between 5.5v - 6v), adjusted my screen accordingly to the size of the load (I hate when the load is too close to the heater or touching it), and I get some decent clouds off the vape. I'm not a cloud chaser by any means, but coming from using portables exclusively, this thing really tosses them out. That being said, I did notice it depends on the material I'm using and its properties (I have some that really produces some clouds, and some that produce very little clouds but get the job done, sometimes better than the cloudy stuff).

Then again, I've got my draw rate down pat thanks to the portables. When it comes to the water accessory, GL with that learning curve. I have a water pipe I use with the Nano, but I find I have to draw harder with it Either way you should be fine. Anyway GL! I've had my Nano for almost 2 months now and I'm loving it. Wish I had made the jump to a desktop a bit sooner; oh well better late than never.

 

[throwawaytre3s]

Then again, I've got my draw rate down pat thanks to the portables. When it comes to the water accessory, GL with that learning curve. I have a water pipe I use with the Nano, but I find I have to draw harder with it Either way you should be fine. Anyway GL! I've had my Nano for almost 2 months now and I'm loving it. Wish I had made the jump to a desktop a bit sooner; oh well better late than never.

Thanks man! Yeah, I'm excited for it, the mail man should be here within the hour, I'm having a small stem and making some lunch while waiting, haha! It's been almost a month, which can be expected from dhgate, so I've been waiting. I agree on portable helping me with my draw rate. I got my enano knowing how to draw from it well, since I have a firewood 3, which is pretty similar.

 

[ataxian]

Thanks man! Yeah, I'm excited for it, the mail man should be here within the hour, I'm having a small stem and making some lunch while waiting, haha! It's been almost a month, which can be expected from dhgate, so I've been waiting. I agree on portable helping me with my draw rate. I got my enano knowing how to draw from it well, since I have a firewood 3, which is pretty similar.

I took the NANO out of rotation because I was breaking GonG's like nobodies business however I installed some outdoor plugs and put the NANO back in rotation. At 420 I was trying out the NANO @ 6.0 filled the broken stem with DUTCH TREAT with my new set up and life is worth living!

I need to order more GonG's.

 

[Techn!d0n]

Impressive!

 

[GradBear]

hey guys i need a little help..

so i tried purchasing a nano yesterday but nmi wasn't working. I was getting an error just plainly saying "ERROR. Please contact the merchant" so I did.

but earlier today I tried buying again an my card got now declined. idk what happened but I'm 1000% sure my funds are sufficient. is there anything wrong using NMI?

i can't use paypal atm since it was locked up and under investigation because someone used it and spent some..

please help guys.. i just reloaded this week and i'm really stoke using the nano.

another problem is happening... I double checked my credit card balance and I actually got charged from epicvape. the weird thing is the transaction's status on my epicvape account was cancelled. I heard the customer service is really slow but it's been 5 days since I emailed them.

 

[howie105]

another problem is happening... I double checked my credit card balance and I actually got charged from epicvape. the weird thing is the transaction's status on my epicvape account was cancelled. I heard the customer service is really slow but it's been 5 days since I emailed them.

So what can we do to help? If its our awareness and sympathy you already have it but beyond that its between you, the dealer and you card company. However if you know of something that the forum members can do let us know.

 

[FLelder ent]

I had an unusual and unpleasant experience with my Nano the other day. I had just cleaned my adjustable stem and screen in PBW and during my first draw on the clean stem, I ended up with a mouthful of hot screen and cannabis / ABV. The screen and contents just came right through the stem.

 

[Vaponly]

I had an unusual and unpleasant experience with my Nano the other day. I had just cleaned my adjustable stem and screen in PBW and during my first draw on the clean stem, I ended up with a mouthful of hot screen and cannabis / ABV. The screen and contents just came right through the stem.

Yikes!

Gotta stretch out that screen before reinstalling it after cleaning. If it does not feel tight when pushing the screen back into the gong/stem then take it out and stretch it a little more. It's easy to do and saves you from getting a lung/mouth full of abv and hot screen lol.

 

[BabyFacedFinster]

Yikes!

Gotta stretch out that screen before reinstalling it after cleaning. If it does not feel tight when pushing the screen back into the gong/stem then take it out and stretch it a little more. It's easy to do and saves you from getting a lung/mouth full of abv and hot screen lol.

You definitely want resistance when pushing the screen in place. You generally would use a chopstick and need to put some pressure behind it. Also, I don't know if there is a right or wrong way, but I put my screen in so that that flat end is pointing closer to the heater. IMO, It is harder to do with the stem versus a gong.

Hey @ataxian, maybe one of those wooden wongs for the nano that Ed makes would help you with less gong breakage? I was going to look into one myself.

 

[ataxian]

You definitely want resistance when pushing the screen in place. You generally would use a chopstick and need to put some pressure behind it. Also, I don't know if there is a right or wrong way, but I put my screen in so that that flat end is pointing closer to the heater. IMO, It is harder to do with the stem versus a gong.

Hey @ataxian, maybe one of those wooden wongs for the nano that Ed makes would help you with less gong breakage? I was going to look into one myself.

If WOOD is OK for you go for it!
I have WonG's and STEM'S in wood that I don't use.
We are all different?
"
I'm using a broken stem with a piece of 3/8" Silicone Tubing from a @DDave kit so I can use it!

 

[$un]

I just had my Nano adapter replaced in January & its giving me trouble again. What seems to be a problem with these wires that they only work for a few months then give out? Since the replacement my Nano worked fine until today when I saw the light on & went to take a hit but when I picked it up it was ice cold with the light on!! That shit really scared me I thought my Nano was dead but I pulled & reinserted the plug & plugged it in to another outlet & it warmed up again. Right now its against acting funny, when I hold the unit straight the light stays on but when I flip it upside down the light goes off. With these loose connection issues I'm facing with my unit its making it real annoying to use.

 

[hafalump]

I reckon your cord is dodgey mate.

 

[Haze Mister]

Unfortunately my unit seems to be way way colder than yours ... ?!

I heated it up on maximum level for about an hour before I turned it back to about 7 and took the first hit through my bubbler. I think i am informed pretty well about screen-distances, recommended temperature, etc, so I am wondering why my Nano produces such a little vapor?
Even on 10 it gave me wispy clouds ?!
It did medicate, but on a very low temperature.

The wood is also just a little warm, far away from warming my hands when holding.

I am wondering if my step down converter is the issue here?
I have a 45W/50W step down converter and I am going to purchase a 100W tomorrow, because I remember having read that a stronger converter can increase the performance but I have been pretty sure that the 50W version is sufficient ?

@ all European Nano users

Can someone please chime in and help me out here???
Thanks

There is something wrong. I'm in the EU, using a 55W converter. If i set the Nano to 10 the herb will immediately start burning when I inhale. I use it at just below 6 for herbs and the Nano is ready to go after 10 minutes of warm-up. I get a good cloud with the first hit, straight away. After half an hour the whole thing is very warm so that I have to hold it from the bottom of the unit to be comfortable.
You could try another converter, hopefully that's wher the problem is.

 

[CarolKing]

@Haze Mister it sounds like your Enano is working fine. 10 temp is too hot for even shatter. The Enanos can vary in heat. Most of us get good results around temp 6. Some of us prefer higher or lower temperatures.

It could even be your electrical outlet depending how high or low heat you have by a few 1/10s of s degree. I turn the temp up around to 6.75 when I vaporize shatter.

Some of my cannabis requires a heat level of 6.5 and I have other strains that need a lower heat, even as low as 5.75. If my vapor is too harsh I turn my heat down. If I'm not getting enough flavor I turn it up.

Often cannabis that is dryer requires a lower heat on the Enano. That has been my experience.

 

[ren.dnb]

Thanks man! Yeah, I'm excited for it, the mail man should be here within the hour, I'm having a small stem and making some lunch while waiting, haha! It's been almost a month, which can be expected from dhgate, so I've been waiting. I agree on portable helping me with my draw rate. I got my enano knowing how to draw from it well, since I have a firewood 3, which is pretty similar.

Awesome! Hope it goes well with your water attachment. I also have a Firewood 3 lmao... great little portable. For me at least, the Firewood 3 comes off like a portable E-nano haha.

 

[throwawaytre3s]

Awesome! Hope it goes well with your water attachment. I also have a Firewood 3 lmao... great little portable. For me at least, the Firewood 3 comes off like a portable E-nano haha.

Exactly like a portable nano! Also it's been working out great, I'm getting 3-4 fantastic whitewalling rips out of .1 of this Lady Red I have! I love it!

 

[Vaponly]

Also, I don't know if there is a right or wrong way, but I put my screen in so that that flat end is pointing closer to the heater. IMO, It is harder to do with the stem versus a gong.

I find placing the load further from the heater gives me a far more even roast, whereas having it closer gives me a bit of pinpoint charring. I usually position the basket screen as low as it will go in the 19mm gong. The extra distance does not seem to rob it of any heat.

With the Nano set @ 6.25-6.5 I usually get two big white-walling draws followed by a one last wispy one using around .025g-.035g of finely ground material through any of my glass pieces. The resulting abv is always a nice medium brown.

 

[AngryJon]

With the Nano set @ 6.25-6.5 I usually get two big white-walling draws followed by a one last wispy one using around .025g-.035g of finely ground material through any of my glass pieces. The resulting abv is always a nice medium brown.

I have the same draw count on similar material, but I leave my e-nano at 7 or a hair below.

 

[Vaponly]

I have the same draw count on similar material, but I leave my e-nano at 7 or a hair below.

Probably due to our Nano's having slightly different heating elements.

My newest Nano is almost two years old.

 

[Tony Timeless]

Hey everybody,

I just wanted to report back, that in my case the problem really was the converter.
As @Haze Mister stated above, 50W should be sufficient. Maybe the converter which I bought was faulty, i don't know. I am using a 100W model now and the E-Nano runs noticeably hotter now!

I am so happy about it and the Nano is so beautiful. Maybe I will post a picture later if you would like!

What really stands out so far is definitely the amazing taste this thing produces and yes ... of course its beautiful appearance

I have to admit though, that obviously I still have to learn a lot when it comes to technique.
Didn't expected this, since I've watched several tutorials and have read many many pages of this source of information but seems like I still queue goofy

I'm still a step away from the point I want to be, but I surely will take some more time to get used to it and will report back. I am sure you guys can give some amazing advice.

 

[ataxian]

Hey everybody,

I just wanted to report back, that in my case the problem really was the converter.
As @Haze Mister stated above, 50W should be sufficient. Maybe the converter which I bought was faulty, i don't know. I am using a 100W model now and the E-Nano runs noticeably hotter now!

I am so happy about it and the Nano is so beautiful. Maybe I will post a picture later if you would like!

What really stands out so far is definitely the amazing taste this thing produces and yes ... of course its beautiful appearance

I have to admit though, that obviously I still have to learn a lot when it comes to technique.
Didn't expected this, since I've watched several tutorials and have read many many pages of this source of information but seems like I still queue goofy

I'm still a step away from the point I want to be, but I surely will take some more time to get used to it and will report back. I am sure you guys can give some amazing advice.

I medicated as much as I can!
Love to medicate with cannabis!

I put a plug in my garden for the NANO.
Image the NANO all day long?

This my friend is evolution!

CANNABIS + NANO = CIVILIZED