AJS

Calm Consistency
I've read well over 100 pages of this thread and haven't seen any mention of using a whip. However, I'm sure it's possible and someone has probably done it.

Lol, that's funny. My friends and I just stick my MFLB hose/stem into the mouthpiece of my bubbler and its a tight seal. Makes it so you don't have to bend over or can hit laying down. It's just fun.

Try a more coarse ground cannabis. Maybe a different grinder. Also try small nuggets

thank you!
 

CarolKing

Singer of songs and a vapor connoisseur
Having a difficult time trying to get to sleep. I just ground up some GrapeApe, that's a nice strain for night. Just loaded up the stem for the Nano. It's sure has a nice grape flavor. Happy weekend friends. What do you have in your nano?:tup::leaf:

Busy day tomorrow. Hopefully by the time I get to the mmj farmer's market all the Gorilla Glue won't be gone.
 

rabblerouser

Combustion Fucker
Having trouble getting RMA taken care of.
Andy and Nadia have been really friendly, but i have been waiting over a month for them to send me a RMA from me sending them my cracked e-nano. The latest was that Andy e-mailed me and said they had no record of the RMA, this was after e-mails in previous weeks saying he would be sending me the replacement. Even asking me which wood i wanted.

I think they are great people with a great product who are not great at running a business

I had to order a backup maple e-nano, that came without a hitch, luckily. But has a goofy cord.

(Just checked it's actually 2 days less than a month since usps said my cracked unit was delivered to epicvape, not quite actually over a month yet)
 
Last edited:

phooka

Well-Known Member
Having a difficult time trying to get to sleep. I just ground up some GrapeApe, that's a nice strain for night. Just loaded up the stem for the Nano. It's sure has a nice grape flavor. Happy weekend friends. What do you have in your nano?:tup::leaf:

Busy day tomorrow. Hopefully by the time I get to the mmj farmer's market all the Gorilla Glue won't be gone.
"Black Cherry Soda" in my nano. Not the biggest clouds, but you feel them, and I'm so lifted with no anxiety or raciness at all. Gettin shit done!!!

Hey guys, been having cleanliness issues with my bubbler. I'm always getting buildup along the side after only like a few hours of use. It's basically tiny abv that falls thru the screen then accumulates into a bulk. Idk how it's falling through so quickly and dirtying my bubbler. I have to clean it every day because it just looks gross. Any advice?
Clean it everyday. I have the same problem and that's the best solution I've found. Since the plant matter getting through hasn't been combusted, it's more prone to cultivate mold in a moist atmosphere. Didn't change my water for a few days and it got funky like a stagnant pond. Now I change it daily, really hot water swish swish squeaky clean. But other wise, coarser grind was good advice, that has been helping me personally lately. I actually was just thinking about this last night. There must be something we can stick in the GonG to trap particulates without inhibiting airflow or stealing vapor, that is also easy to maintain.. oooh fresh herbs would be nice.. some rosemary and sage and lavender

Just wanted to share with ya'll my new awesome Aromatherapy cup for the E-Nano - made by our talented @VaPeD&CoNfUsEd

G3ZyQkJ.jpg



And of course, here it is in it's stand:
va38DgU.jpg




Major props to @VaPeD&CoNfUsEd - your artwork never ceases to amaze me

:cheers:

So Creative!!!!
 
Last edited:

Frostiestone

Well-Known Member
There must be something we can stick in the GonG to trap particulates without inhibiting airflow or stealing vapor, that is also easy to maintain.. oooh fresh herbs would be nice.. some rosemary and sage and lavender

Haha funny you mention that. I used to do that with my OG Davinci in the top chamber. Left a load of mint in there for well over 20 sessions. Let me tell you, it was a sticky mess when it came time to remove...but it was a sticky mess that got me very, very stoned :zzz:

Lol, that's funny. My friends and I just stick my MFLB hose/stem into the mouthpiece of my bubbler and its a tight seal. Makes it so you don't have to bend over or can hit laying down. It's just fun.

Haha thats awesome dude. I have noticed that an 18mm male joint fits pretty snug in the mouthpiece of my d020-d, I've been attaching a whip to it and just wallowing in the milk i pull from it
 
Last edited:

MinnBobber

Well-Known Member
I actually was just thinking about this last night. There must be something we can stick in the GonG to trap particulates without inhibiting airflow or stealing vapor, that is also easy to maintain.
..................................................................

I sometimes us degummed hemp fiber, I play around with it.
Pinch off a very thin but wide piece and wedge it in. It will stop almost all particulate matter.
If very thin it adds no perceptible extra drag.
It does soak up a little bit of the goodies BUT when dirty you just vape the hemp fiber
 

Bravesst

Full Steam Ahead
Manufacturer
@rabblerouser Andy has said Nadia isnt working for epicvape anymore so I would re email andy at
Andy@epicvape.com. Seems like with her gone things might get backed up a tad till he gets someone new trained.
Not good news - as service is everything, and Nadia did the right thing by me. Good luck Andy and Nadia, hope all turns out okay for you, and all of us enano owners who have grown to depend on epic vape.
 

Vapor_Eyes

taste buds
Having trouble getting RMA taken care of.
Andy and Nadia have been really friendly, but i have been waiting over a month for them to send me a RMA from me sending them my cracked e-nano. The latest was that Andy e-mailed me and said they had no record of the RMA, this was after e-mails in previous weeks saying he would be sending me the replacement. Even asking me which wood i wanted.

I think they are great people with a great product who are not great at running a business

I had to order a backup maple e-nano, that came without a hitch, luckily. But has a goofy cord.

(Just checked it's actually 2 days less than a month since usps said my cracked unit was delivered to epicvape, not quite actually over a month yet)
Try shooting Andy (@ACE OF VAPE) a PM, you might have more success than with email.

Not good news - as service is everything, and Nadia did the right thing by me. Good luck Andy and Nadia, hope all turns out okay for you, and all of us enano owners who have grown to depend on epic vape.
I'm sure Nadia was great and hopefully her successor will be too. I have only dealt with Andy, I had issues with an order while Nadia was out of town last month. He did a great job taking care of everything. I also ordered some gongs and an extra stem the week after Nadia left, when Andy was on his own, and the order shipped later that day.
 

hweezi

formally cwheezy
I love how it's almost like each week I find something new that surprises the shit out of me while using my nano.

Like holy mother of FLAAAAAVOUR :mmmm: this is amazing,
urIRf6q.jpg


I've only ever really cranked 'er with concentrates but last nights session I dropped it to a 6.8 while normally having it at 7.8 and put it in the dry stem and it's awesome. It just hits and hits and hits too. Definitely enjoy using concentrates this way over a nail [CALL ME CRAZY I MAY JUST BE] not to mention when the stem gets nice and coated all I gotta do it push the basket screen back and fourth through it and it'll collect all the goodness. Then you just push it up a little closer to the heater and then crank the nano to 10 and you're gone. :smug:

Yeah, just thought I'd share :)
 

NekoGurrl

Well-Known Member
Yesterday my Crotch Walnut Nano arrived. I'm so happy with it! Runs a little hotter than my Maple, the LED isn't as recessed either, and it doesn't make noise when I tap it. Feel more comfortable having the a second as backup, this is my preferred method of medication and wouldn't want to have to go back to my Extreme Q. Both the dry tube and a 14mm gong fit perfectly.

xaHoqs6.jpg
 
Last edited:

Vapor_Eyes

taste buds
@NekoGurrl That's some beautiful wood! I didn't fully appreciate how beautiful my fiddleback maple is until last night. Don't get me wrong, I've loved its appearance since I opened the box. But I had never looked at it that close while that baked. The light caught my nano just right and I noticed how the grain's satiny finish and the stripes have a cool unique 3D effect when you move it around, like the old school lenticular 3D effect that shuffles between two pictures, but way cooler. Yeah... I was pretty high lol, the nano definitely did its job.

Have you ever seen an E-Nano... on weed? That's the way to see it man!
 

Delta3DStudios

Well-Known Member
Accessory Maker
Anyone suggest a DIY aromatherapy cup for the time being while I save for a JoDa custom one? @Ratchett, I blame you and that dude on vaporents for my lusting after pretty smells out of pretty bells :clap::tup:

Hahaha Hey! I waited a LONG time for that cup, it's not every day you can convince @VaPeD&CoNfUsEd to dedicate the time necessary for a project like that.

I believe the Arizer Air Aromatherapy Cup actually fit's the Nano nicely. Although it might get a bit hot to handle after it's preheated :lol:
 

CarolKing

Singer of songs and a vapor connoisseur
I like Epic's aroma cup, it has a little handle. Next time I order anything from EpicVape I will get a couple of the cups. I use the Solo aroma therapy cup for now. It's nice to have the nano doing double duty.;)

EDIT @ACE OF VAPE
That's too bad if they are discontinued. I hadn't used them, I thought it was cute with the little handle. If it didn't fit well I can understand. The Solo cup doesn't work perfectly, but works OK. Andy if you read through the thread please comment about the aroma therapy cups.
 
Last edited:

Delta3DStudios

Well-Known Member
Accessory Maker
I like Epic's aroma cup, it has a little handle. Next time I order anything from EpicVape I will get a couple of the cups. I use the Solo aroma therapy cup for now. It's nice to have the nano doing double duty.;)
I think they've been discontinued. I didn't care for the Original cups anyway - they were too lose for my comfort (kept spilling some oil if I bumped my table the wrong way!) - The AA cups fit much nicer in my opinion
 

Vapor_Eyes

taste buds
sipping some more White Rhino in my eNano... perfect combo.



Enano Power Cord / Anchor Spools (2 shown in pic)
tAXlIKT.jpg
I love your power cord mod, very nice! I'm still trying to figure out my ideal setup.

I am also enjoying White Rhino today. It's always tasted like grapefruit but I noticed a couple of times lately at higher temps it tastes like tangerines. I love this strain! I always enjoyed it when I was combusting but it's so much better vaporized. The E-Nano produces amazing flavor with the dry stem.
 
Last edited:
Top Bottom