E-Nano from Epickai

[max]

I noticed that my glass screen has very fine holes in it, nothing gets through it!

Sounds like a reworked design.

 

[lazylathe]

I will try and get some pics up of it tonight!
To me it looks like the holes are around 1mm in diameter.

I love being able to just throw the whole stem in alcohol to clean it and not have to brush out small screens!

 

[mlo4sho]

So far I'm loving the E-Nano. I've barely had a chance to use it as I've had so much stuff going on but the few times I've used it I have really enjoyed it. I get a nice amount of hits off my usual load and the flavor lasts longer than I am used to. I haven't had time to post a review or anything but my one major gripe is that the screens that were included are too small for the GonG and the direct draw stem and don't sit still (so if i'm not careful when i'm stirring i can knock all of my material into the can of my bubbler because the screen is wobbly and moves all over if touched!) For those of you using your own screens what size do you suggest for a good fit?

 

[EveryDayAmnesiac]

my one major gripe is that the screens that were included are too small for the GonG and the direct draw stem and don't sit still (so if i'm not careful when i'm stirring i can knock all of my material into the can of my bubbler because the screen is wobbly and moves all over if touched!) For those of you using your own screens what size do you suggest for a good fit?

Read back a bit and you'll find a few people who have had this problem, myself included. We were all using 3/8 screens. I believe kingofnull received a replacement GonG that corrected problem. I don't know if anyone else has received a replacement. I know I have not yet.

 

[lazylathe]

This is what my glass screen looks like.
Perfect sized holes!
Sorry it's a bit dirty...

 

[C-weed]

Read back a bit and you'll find a few people who have had this problem, myself included. We were all using 3/8 screens. I believe kingofnull received a replacement GonG that corrected problem. I don't know if anyone else has received a replacement. I know I have not yet.

same here...hoping Andy gets those all glass gongs in soon. He was out of stock, and replaced mine with the original version. i too have had many screen problems, and am hoping the new gong version will remedy that. seeing yours gives me hope....very excited.

 

[Enchantre]

EDIT: Checked out my screen stem, and it is the new one with 5 tiny holes.

My hubby did inhale a bit of debris the first time he tried it... so I added the screen to it. That's working great.

I was thinking, though, after watching him learn how to use it, that another stem would be handy (in case of breakage....).

 

[max]

my one major gripe is that the screens that were included are too small for the GonG and the direct draw stem and don't sit still (so if i'm not careful when i'm stirring i can knock all of my material into the can of my bubbler because the screen is wobbly and moves all over if touched!)

If the 3/8" drops down easily and fits flush, it will move when you stir, but if you're careful you can still easily stir without displacing the added screen or letting herb get through. And after a bowl or two, the screen stays put pretty well once there's some stickiness. I prefer the loose fit myself, for easy placement and removal.

This is what my glass screen looks like.
Perfect sized holes!
Sorry it's a bit dirty...

I don't have access to mine for comparison, but those holes look plenty big enough to pass small particles of ground bud. I'll stick with my added screen. Air flow is still very good.

 

[XGerpXDerpX]

I have those flower/jack glass screens that work fine too in the ones that dont have built in glass screen, just need to try to not lose them, I just drop it in and leave it even if its crooked

 

[Enchantre]

Okay, I just had a whole, solid night's sleep!

I didn't even use my "sleep" herbs, just some chocolate chunk I had in the stem. Hubby and I sat and toked it down to caramel ABV (not unusual, just sayin'), then off to bed we went. I slept from 10 pm until 7 am!

I'm thinking that maybe the vape used affects the CBDs (and other endocannabidoids) released, both in range and in quantity. Maybe.

Whatever. I love my Nano. Totally.

 

[lazylathe]

I don't have access to mine for comparison, but those holes look plenty big enough to pass small particles of ground bud. I'll stick with my added screen. Air flow is still very good.

I do not grind my bud, just pull off a chuck and in it goes.
That way i eliminate the small particles.
One good thing about legally growing my own bud is i can decide on what %RH to store it in.
I keep it at about 65% so it is still moist and pliable, not dry and crumbly.

 

[XGerpXDerpX]

Looking for status update on glass screen stems/gongs theyve been out of stock...

 

[Immortal]

Man I can't wait for this thing to arrive. My last PD has become so unreliable I had to bust out the pipe after my workout today and combust. I feel like I'm in the dark ages man.

 

[ACE OF VAPE]

Looking for status update on glass screen stems/gongs theyve been out of stock...

All glass is back in stock in limited quantities.

 

[EveryDayAmnesiac]

Have you posted the design already? I may have missed it.

I was rereading the Nano thread and realized I did in fact see this way back when. But I don't remember seeing it whatsoever.

I blame the Nano.

 

[lazylathe]

LMAO!!!
Easy way out - Blame the NANO!!!

 

[EveryDayAmnesiac]

All glass is back in stock in limited quantities.

Are you going to be sending out replacement standard GonGs for those having issues with their previous ones? Try as I might, my screens will never stay in place.

 

[philthy]

Running about 4-10 DAYS shipping time right now depending on what type of wood, and options ordered.

Andy, I ordered the two vape combo deal on the 22nd. Both of them are walnut. Are there any updates on when the combo deals will start shipping?

 

[nkotb]

philthy, I ordered 2 cherries and a walnut on the 23rd and it shipped on the 2nd. Hopefully we'll both be seeing packages soon.

 

[philthy]

philthy, I ordered 2 cherries and a walnut on the 23rd and it shipped on the 2nd. Hopefully we'll both be seeing packages soon.

Did you get a tracking #? I didn't register an account when I bought the deal. I haven't received any e-mail update on processing or shipping besides getting an invoice and order number.

 

[Immortal]

I got a tracking number. Mine shipped yesterday, I'm very excited (now I only have to resort to combustion for a few more days). It's always a good idea to create an account in case of things like this.

 

[nkotb]

Did you get a tracking #? I didn't register an account when I bought the deal. I haven't received any e-mail update on processing or shipping besides getting an invoice and order number.

I didn't register for an account when I ordered either, but my tracking number was emailed to me on the 1st.

 

[philthy]

The 420 combo deal arrived late Saturday afternoon. I cannot seem to get the screen to fit in the glass stem. It would either bend and turn or it won't fit flush and fall out. Is there any advice on how to put the screen on?

 

[mlo4sho]

The 420 combo deal arrived late Saturday afternoon. I cannot seem to get the screen to fit in the glass stem. It would either bend and turn or it won't fit flush and fall out. Is there any advice on how to put the screen on?

I'm having the same problem. Haven't had any luck with the included screens.

 

[kingofnull]

I don't get why this is just now emerging as an issue. All my earlier Nano stems and gongs fit screens fine.