Walter Bishop
Well-Known Member
I'm the opposite, at least 80% of the time I do use water.
That said, when I'm looking for the best flavor and the best effect, I use the stem. It's like a treat for me.
E-Nano from Epickai
I'm the opposite, at least 80% of the time I do use water.
That said, when I'm looking for the best flavor and the best effect, I use the stem. It's like a treat for me.
AJS
Calm Consistency
When it's during the day and I got shit goin on and want to be finished relatively stealthily, I'll just take a few hits out of the dry-stem at 6-6.5 and move on with my day. That gets me pretty damn stoned, and can be done in 2 minutes. I will pack it bigger and take my time on it if I don't need to be so quick, so that way I can enjoy a few good tasty hits. When no one is home and I wanna really rip some vapor, I hook up my bubbler and turn the temp up to 6.5-7. I've never used the pax but I hate it just because it's not the Magic Flight box, so I'm with you there. As a current flight box owner with PA and bubbler adapter, I can safely tell you, you will enjoy the E-Nano more with drystem than you ever did the magic flight. I still love my box, don't get me wrong, but the Nano is another level.
CarolKing
Singer of songs and a vapor connoisseur
You will find that the Enano will knock your other two vapes out of the park. It has waaaaaay better flavor than either of the vaporizers you mentioned. I only use water occasionally with the Enano. It works amazing dry or with water filtration.
I found that the Pax or the MFLB wouldn't be in the same league as the Enano IMO, not just because of portability but taste. The MFLB is a pain in the ass having to load the battery every time you want to take a draw. You will need your MFLB for portability, but at home or close to an electrical outlet the Enano is awesome.
You can kick back and enjoy with a larger amount of herb in the bowl on low heat and sip, relax and recoup from your hectic day. Some folks like just a few really hard lung busting intense draws then they're done.
It's the perfect at home medicating companion. Not to mention a beautiful piece of vaporizing equipment made with care and talent from a fellow FCer.
Last edited:
Eschient
Giga-Dweebess
I used the Enano through the dry stem exclusively for about 3 months before I got my bubbler. Currently I'm using the dry stem during the day to try and drop my tolerance a bit. It's really a nice treat to swap between the two. The bubbler gives nice cloudy, moist hits, but the flavor isn't as prominant. The stems give delicious hits that just beg to be sipped at all day long.
I'm looking forward to my next E-nano so I can get a WonG and a wood stem to see what kind of experience I get from those.
As far as having it hooked up to something that is more obvious, I'm sure there's some nicer glass out there that can look a little more like art but you use the bubbers a lot like the stems - at least I don't leave my Enano on my bubbler. I don't even leave my glass out when I'm not using it. BLah blah blah, anyway, the point being you don't have to use it through water, but don't shy away from it in favor of discretion. The Enano has a lot of nuances to play with and they are all amazing.
FLelder ent
Well-Known Member
The nano definitely conserves weed and it doesn't look "like a thing to smoke weed out of."
I use mine 50/50 water / dry, its all good, just get it!
whatupwhatup
Member
alright, it's done. ordered. cherry + aromatherapy cup. thanks everyone, I appreciate your time. now I just have to wait..................
ataxian
PALE BLUE DOT
I leave my NANO on 24/7 at 6.7 however my screen is missing so I set it at 8.0 to arrive at the desired effect!My ENano hardly ever gets to see water... I use a JHook or a Bamboo stem, at 6.25, with a fairly thin load...okay, sometimes it touches, but whatever
It's the best sippin' vape ever... and being on & available 24/7 is the best thing in the world for me.
I have a bunch of SHERLOCK ' S (JHOOKS ) I need to try that?
My FC186 is getting used and abused!
flotntoke
thoroughly vaped
I have the Solo as well as a Enano. I noticed that there are quite a few folks that have both. The Enano is a little bit more of a harder hitter. You can use less herb also lower and raise the screen for a more of a tailored hit. Some folks use a little herb for a couple of hard hitting draws or some use more and just sip a bit and get their meds that way over a 10 min session or so. I am fairly new to the nano, but having fun learning.
If I don't want to be tethered to a cord in the house I use the Solo. I agree they do compliment each other. They both give really great vapor flavor.
Everybody has been really helpful with their suggestions and knowledge.
EDIT
One thing I want to add is that the flavor is better at the end of my sessions with the Nano. Even though the ABV gets dark the flavor keeps coming.
nano dry is a flavor GOD! Really amazing, tasty hits. Am sure I'll be doing a little more with my new J-Hook from yeti glass. If you haven't seen his thread yet, check it out. @VaPeD&CoNfUsEd knows him and turned him on to FC. So far only two small loads through this puppy - but loving it!!!! Will try to get some better pics up soon.
I'd send an IM too if you don't hear back soon. Does sound like your heater has been knocked loose. Earlier models rattled a bit like this after a while because the insides were a bit different, but if yours a year or so old or less, you shouldn't have this issue unless something has been knocked out of place (possibly the retaining clip @SSVUN~YAH mentioned). Could go on forever with nary another problem with it, but I'd start warming up that backup vape and getting her ready to ship.
Just to reiterate what others have said, if you like the MFLB the nano will knock your socks off! It's not just the volume or density of vapor - which are both much better even with MFLB on PA - but the flavor is in a whole different league. It's kind of like asking a major league baseball player is it worth the feeling you get hitting a fastball over the fence.... I have a whiffle ball and plastic bat.
Also, some discussion above about solo being a perfect mate. I guess it kind of is, and I still use my solo regularly. But, IMO the perfect pairing is a nano and a vapman. With vapman you need a butane jet lighter, but seems so similar to the nano in so many ways. Much wood, simple, very efficient, can deliver small tasty or huge cloudy hits, very versatile. Really nothing too wrong with the solo - but vapman is another keeper that will always be in m vaping arsenal. Now going try it out on this new J-hook!
SSVUN~YAH
You Must Unlearn, What You Have Learned...
That's a mighty fine looking hooker you picked up there @flotntoke nice choice! I'm going to have to follow the yeti myself before too long, it would an awesome combo (Nano+JODA GonG+Yeti Jhook=nano dry is a flavor GOD! Really amazing, tasty hits. Am sure I'll be doing a little more with my new J-Hook from yeti glass. If you haven't seen his thread yet, check it out. @VaPeD&CoNfUsEd knows him and turned him on to FC. So far only two small loads through this puppy - but loving it!!!! Will try to get some better pics up soon.
I'd send an IM too if you don't hear back soon. Does sound like your heater has been knocked loose. Earlier models rattled a bit like this after a while because the insides were a bit different, but if yours a year or so old or less, you shouldn't have this issue unless something has been knocked out of place (possibly the retaining clip @SSVUN~YAH mentioned). Could go on forever with nary another problem with it, but I'd start warming up that backup vape and getting her ready to ship.
Just to reiterate what others have said, if you like the MFLB the nano will knock your socks off! It's not just the volume or density of vapor - which are both much better even with MFLB on PA - but the flavor is in a whole different league. It's kind of like asking a major league baseball player is it worth the feeling you get hitting a fastball over the fence.... I have a whiffle ball and plastic bat.
Also, some discussion above about solo being a perfect mate. I guess it kind of is, and I still use my solo regularly. But, IMO the perfect pairing is a nano and a vapman. With vapman you need a butane jet lighter, but seems so similar to the nano in so many ways. Much wood, simple, very efficient, can deliver small tasty or huge cloudy hits, very versatile. Really nothing too wrong with the solo - but vapman is another keeper that will always be in m vaping arsenal. Now going try it out on this new J-hook!
)Is my math correct!?!
flotntoke
thoroughly vaped
That's a mighty fine looking hooker you picked up there @flotntoke nice choice! I'm going to have to follow the yeti myself before too long, it would an awesome combo (Nano+JODA GonG+Yeti Jhook=
Is my math correct!?!
Yes indeedy! No Joda GonG yet, tho. Dry with nano? F'n amazing!!! Then vapman? Quite nice. Back to the nano for one last test run? OMG... heavenly!
EDIT: Well we all know how hard it is to do that last test run with a new piece in the house... tried the Joda carbed GonG on the new J Hook. Loaded a little deathstar. WOW! F'n WOW!! Amazing flavor and perfect hits. Should have just done it as soon as @SSVUN~YAH suggested it. He is a true vapor master! Carb now seems to make a little more sense to my GonG lifting conditioned brain. Downside? I just sit there and hit and hit like it is a pipe with a big wooden bowl on it. Puff, puff, pull finger clear. Replace finger, puff, puff, pull finger clear. Replace finger, puff, puff ....... That's about all I remember. Then it all kind of went like....
Last edited:
nano-macro
Well-Known Member
Post some pics of your grain pattern when you get it if you would. I got the cherry too, its perfect like a tiny piece of wooden art that feels good in the hand.
Be aware that it takes a few days until being submitted for shipment to the carrier.
On a side note, I just spent 6 hours at the ER with a kidney stone. First thing I did when I got home after getting an anti inflammatory shot was spark a tiny pipe bowl which tasted terrible. I then realized I had left the nano on while I was away so I quickly switched to it. I only combusted because I was still feeling sick and didn't want to wait for warm up. Lesson to learn was always be patient for warm up. It takes a few minutes on max, then lowered as desired when ready.
Some really fragrant Blue Dream has me nicely medicated. Good end to a long and painful day.
dimildarko
Well-Known Member
Really bummed to hear Joda is stepping out of the game soon. Looks like I missed my chance at a carbed GonG, should have ordered it when my gut told me to.
Don't you worry about it. I have several unique 3D printed WPA's designed for herbs and others designed for concentrates. All of which I can't print just yet (damn technology, evolve faster!
)As soon as I can find a vapor safe & high-temp safe material to work with, you can bet your ass I'll be trying to 3D print my own Nano GonG stems (and hooks, and adapters, etc
)!
dimildarko
Well-Known Member
Don't you worry about it. I have several unique 3D printed WPA's designed for herbs and others designed for concentrates. All of which I can't print just yet (damn technology, evolve faster!
As soon as I can find a vapor safe & high-temp safe material to work with, you can bet your ass I'll be trying to 3D print my own Nano GonG stems (and hooks, and adapters, etc
Well this puts my mind at ease a bit. I just started getting into using my GonG but I have to be very careful to not blow the herb out, hoping a carbed GonG could prevent this.
SSVUN~YAH
You Must Unlearn, What You Have Learned...
Hope all is well!
Nah I just learn from awesome ppl, like you w/ the Nano for example! Thx for the kind words!
Good news, with glass being printable and your CNC machine the orders will be piling up, congrats bud! What's the 411 on that screen press?Don't you worry about it. I have several unique 3D printed WPA's designed for herbs and others designed for concentrates. All of which I can't print just yet (damn technology, evolve faster!
As soon as I can find a vapor safe & high-temp safe material to work with, you can bet your ass I'll be trying to 3D print my own Nano GonG stems (and hooks, and adapters, etc
flotntoke
thoroughly vaped
Bummed to hear this, too. He does such great stuff! Will have to go check out his thread.
Such a great person and so modest, too! You're truly a vapor master in my book. Keep on keeping on!
Lol I've been recently thinking to myself "Damn! I'm out of clean screens, I need to finish that damn press!"
I had an issue with my 3D printer recently, she started acting up and failing to print properly. I guess after extruding 5,000 meters of filament with over 6000 hours of print time, the extruder's teeth started to wear out! Had to tear apart the print-head this past weekend and salvage parts from one extruder to rebuild the other. Guess it's time to start ordering spare parts
The press is coming along. Right now my problem is finding a way to keep costs down. The new brass inserts are expensive and I'm having a hard time finding long thumb-screws. I think I'm going to have to buy standard bolts and 3D-print knobs for each!
flotntoke
thoroughly vaped
Lol I've been recently thinking to myself "Damn! I'm out of clean screens, I need to finish that damn press!"
I had an issue with my 3D printer recently, she started acting up and failing to print properly. I guess after extruding 5,000 meters of filament with over 6000 hours of print time, the extruder's teeth started to wear out! Had to tear apart the print-head this past weekend and salvage parts from one extruder to rebuild the other. Guess it's time to start ordering spare parts
The press is coming along. Right now my problem is finding a way to keep costs down. The new brass inserts are expensive and I'm having a hard time finding long thumb-screws. I think I'm going to have to buy standard bolts and 3D-print knobs for each!
Dude! You are a beast!! Keep up the great work! I don't know how you do it, but pretty sure I couldn't.
I have no life
No kids, no pets, a good day-job, and a wife that works evenings around this time of the year. FC and Delta3DStudios have given me something better to do with all my free time. I'd rather be inventing something awesome, than sitting on my lazy ass playing video games and watching TV!
Last edited by a moderator:
Traaaaan
Well-Known Member
really? No wonder he stopped responding to my pms. I was looking to get a custom colored carbed gong and was in the final stages of picking colors and making up my damned mind. Who else can make carbed gongs?
Johatsu shita
Well-Known Member
Well this blows... Oh well, I've been meaning to get into glass blowing looks like now is a good a time as any...
GetLeft
Well-Known Member
I'm hoping you won't mind my laziness and allow me to ask a question that's probably been answered many times before but for which I don't want to have to search… I'm close to purchasing an e-nano (and just now I get it -- e-nano, enano --that deserves a lol). So very close. But a practical concern has presented itself to me: does the nano reek at all? If I go the way of the nano, it will get mostly discrete air time. If it is "strongly scented" in storage, it might present an issue… Thanks in advance and I promise never again not to search for an enano answer as one properly should do.