KidFated.
Unknown Member
Nano, UD, and HI? Trifecta. How about it @SSVUN~YAH ??
E-Nano from Epickai
I love this thing more and more every day.
Jokermachine
Well-Blown Member
Using mine everyday for months.
SSVUN~YAH
You Must Unlearn, What You Have Learned...
I can't believe I haven't pictured that on the 4way! Great idea will get one tonight!
KidFated.
Unknown Member
Don't forget Vapman.......
BoogerMan
Well-Known Member
Do they even make 5 way adapters lol? Might have to contact V&CDon't forget Vapman.......
SSVUN~YAH
You Must Unlearn, What You Have Learned...
Could add a few "Y" adapters but I agree V&C is the ticket!Do they even make 5 way adapters lol? Might have to contact V&C
Melting Pot
Sick & Twisted
Stack two of those claisen's be done with it. Lol
That's some fun testing right there!!!
@SSVUN~YAH you should make a video with that setup
SSVUN~YAH
You Must Unlearn, What You Have Learned...
How bout a flip book? Lol, I just started doing pics after two years of membership, vids might be that or more. Plus my phone is LD, no not LG its...
grokit
well-worn member
SSVUN~YAH
You Must Unlearn, What You Have Learned...
Lol! That is a pretty shot!Got milk?
I'd say yes!
It's from GC Forums 
That's not me in the gif either! 
Tweak
T\/\/34|<
Lol! That is a pretty shot!
It's from GC Forums
I was going to ask, when did you get a Nikon D80,
.
Traaaaan
Well-Known Member
Eyeing a new vape. I have a bunch of portables but want a monster desktop unit. The e nano is a finalist.
I have a d020d on the way, the orbiter and some other glass. I have the mflb, solo, v2s3 pax l and an air. the mflb is essentially a clunky desktop unit now because I use it with the power adapter and orbiter. I keep it because it's the only on demand vape that I have.
Anyways, are there any accessories that do not come with the unit that I will need or are highly recommended?
I have a d020d on the way, the orbiter and some other glass. I have the mflb, solo, v2s3 pax l and an air. the mflb is essentially a clunky desktop unit now because I use it with the power adapter and orbiter. I keep it because it's the only on demand vape that I have.
Anyways, are there any accessories that do not come with the unit that I will need or are highly recommended?
hafalump
Well-Known Member
Extra screens, the stand is handy. With some tools you maybe able to make one.
Extra stem or gong, glass breaks. Or pimp your nano with custom JoDa glass.
Also Ed tnt wood stems, won't break on your tile floor. A wood stem is on my short list.
Get the FCLOVE dicount, or order custum Snappo wood.
Extra stem or gong, glass breaks. Or pimp your nano with custom JoDa glass.
Also Ed tnt wood stems, won't break on your tile floor. A wood stem is on my short list.
Get the FCLOVE dicount, or order custum Snappo wood.
Last edited:
Norman Clature
Well-Known Member
ARRRRGGGGG!!!!
It's killing me being at work. My unit arrived today but I work the 4:00 p.m.-Midnight shift and won't be able to "test-drive" it 'til I get home tonight.
Still; I'm glad to have it in my possession and even though I didn't actually plug it into the wall I think I will have everything ready to go when I get home. I used Chezgreendream's suggestion about using the Velcro strap to tie up the excess length of wire from wall to unit and to give the Nano more stability when stationary and found a good spot for the unit to be kept when in use.
I can't wait to try it out tonight!
Thanks again to everyone here for helping me decide on my first vaporizer purchase!
I'll promptly report back here when I get back on-site tomorrow...
HA!
flotntoke
thoroughly vaped
I usually use my nano through water, after getting a nasty sore throat a couple times from high heat on the straight stem... but has it been settled yet, as to what exactly (and how much) water filtration removes from cannabis vapor? The flavor definitely suffers, so that means terpenes at least are significantly affected, right?
Sometimes massive vaporbong rips just don't hit as hard as they seem they ought to...
So lately I decided to try something new: only filling my bong to just under the end of the downstem (when held in 'hit position'), so that the vapor doesn't quite bubble through the lukewarm water. Compared to a stem, it catches lots of particles, gives no throat irritation and lets me see how much vapor I'm getting. Compared to water filtration, it gives better flavor, it's disconcertingly quiet, and I think it delivers a stronger/fuller effect... but I couldn't say for sure.
Any thoughts??
As @Enchantre said the other day, LESS IS MORE! Very true with many aspects of the nano. I've tried (and still play with) my nano just about every way you can think of. Small loads, big loads, high heat, low heat, big bubbler, small bubbler, no bubbler, flowers, hash, concentrates - and everything in between! All are great, but my favorite for my daily sesh is a very small load of flowers (2 - 3 hits) at 6.25, on a bubbler that doesn't bubble too much, with just enough water to function. This has been my favorite for more than a year now. I love the effects, but think you can get them with a variety of setups. What keeps this method my favorite is the flavor! Ohhhhh the sweet flavor!
IMO all loads lose flavor after first 2 hits. Sometimes first is best, sometimes second, but by third things are usually starting to drop off. More diffusion and more water usually will also steal flavor (though this D-Cycler doesn't seem as affected - but fancy bubbs like this are for another discussion). YMMV, but my best bang for the buck is to rough grind up about .25 - .5 gram in a 2 piece grinder. Use the notch on the e-pik to set your screen. Draw just a little into the GonG (about thickness of a nickle, maybe less). Warm the nano up somewhere between 6 - 6.5 (depending on your nano, your stash, your preference). Set your bubbler up with just enough water to perc. If you are using any type of dewar joint bubb (top center GonG), keep the water just a tad more than half way up the perc. It will look too low, but when you draw the water on inside of perc will come out, optimally to the top of perc. Put your nano up on there and draw slowly and smoothly, just barely creating bubbles. Pull the GonG and clear. Repeat hit, stir, pull one more (if not spent do one more), stir, dump, blow it clean and load another.
There are MANY other ways to use this puppy, and most are fun and efficient. But, this method works great, tastes great and will conserve your material very well. One caveat.... if you are quick with going through the load and reloading, take a break after two or three loads and let things settle in. I've got on a roll more than a few times and by the time I'm on that 4th or 5th load, the first is just settling in. Not much to do then but sit back and grin!! Think it has been a while and seeing many new names here, so probably time to suggest this vid again... Caligula's 2 hit extraction. If you haven't tried it, you owe it to yourself to give it a whirl. It was a game changer for me after I had been using my nano daily for about a year. Don't get caught up in how big of hits he takes (or loads). Adjust to your own sensible ability and try to keep loads to 2 or 3 hits. He also has some other good vaping vids and a few with nano.
Glad you are enjoying it! I also have a cherry nano, and that song often goes through my head - though it is usually the Stones version. I know... Brit white guy reggae, but it's the Stones!
Think you're on your way to a great choice! nano is tough to beat for the price. Looks like @hafalump gave you quite a list. All great stuff, and never a bad idea to load up your order to save on shipping (and waiting)! All you really need is a GonG to fit your bubb (18mm for D020D and most others). I always pick up screens with everything I order. Have only killed a few, but like having spares and still think they are a great deal at $1 each (5 for $4.95). The nano comes stock with a straight (dry) stem. I think Andy will swap that out for a GonG if you ask (make sure you get a response!), but think it is good to have both in your kit. Dry can be very nice, especially at lower heat to check out a new strain - or to get a buzz but not be stoned if you have shit to do. If you're prone to breaking glass - might be a good idea to pick up a spare of each while you're there. Many have had issues with dropping or otherwise breaking GonGs. But, they do hold up well if you don't abuse them. I've never had one break (though if not for carpet and wood floors I probably would have!).
flotntoke
thoroughly vaped
I hear ya! Looking forward to that one, too. If it works as well as it looks like it will, I may make them all damned near disposable.
But.... for the time and effort (even with @Ratchett 's tool), think you'd be hard pressed (yes... pun intended) to find someone who will form your $0.05 screens for $0.94 labor charge each - unless you have some connections in China. I can be as cheap as damned near anyone, but $1 for a screen that will have a couple hundred $ worth of material vaped through it is still a great deal IMO.
My only problem now is keeping track of them. I know I have a new bag of 5 around here somewhere, and waiting for it to turn up. No worries.. the dozen or so I have in rotation are more than enough. If you've got 6 (one in glass +5), and you don't beat them up too much when cleaning they last a good long time.
ataxian
PALE BLUE DOT
OK!
The NANO is flavor cìty!
I get 5 super milky rips.
Flavor perfect!
GSC amazing in the NANO!
friedrich
Little-Known Member
Yes it is...
just had some myself (platinum variety)
but now it's time to throw in some Sour Tsunami—smells and tastes like a sour citrus candy!
VAPEHUNTER
Well-Known Member
Maybe put it in a small case with an aromatherapy cup and some lemon grass or lavendar and call it what it is, an aromatherapy devise.
Maybe pack it in with a pamphlet about aromatherapy.
I don't know I'm pretty vaped right now
Last edited:
BoogerMan
Well-Known Member
I always ship my stuff when traveling. I vacuum seal anything that I think may have a smell on it (so pretty much everything) and then ship it via USPS Priority Mail. I have never had any issues and I've done this probably 20+ times in the past couple years
The chances of your package getting searched (especially if you vacuum seal everything 2-3 times) are slim to none since nothing should smell and USPS ships thousands (tens of thousands, maybe even hundreds of thousands idk, all I know is it is a shit ton haha) of packages a day!
However, the chances of your carry on bag getting searched is extremely high since it goes through security, and the chances of your checked bagged getting searched are probably 1 in a couple hundred (both are much much higher than your chances with USPS).
So in conclusion, go with USPS if you can afford the extra $12-$20 to ship
Just my
and experience 
Last edited:
SSVUN~YAH
You Must Unlearn, What You Have Learned...
Oh fuck, I done riled up the Nano-Nation! They're gonna send out the Burl-Boys and the Afzelia Mafia to take me out.
The Satinwood Sisters are pissed they were left out!
