E-Nano from Epickai

Vapodudule

Vapodudule

Well-Known Member
My nano took the lead among the collection for its size and effects over herbie. I have to travel a lot and herbie with its huge stepper is not a sturdy fellow. I have a very small stepper for nano that fit the tiny size of the device too.

I use a very deep bowl with the long stem+silicone on 18mm joints, the two screens in rotation are torched very often because of the loads made of flowers and hash on top. 15+ hits, 3 first dry, then f-bomb watered.
7.25 and 8 for each nano i have. Clouds are clogging the tiny f-bomb holes too!

hurray to Andy!
 
biohacker

biohacker

H.R.E.A.M
I could live without an EVO or Herbie (had both), but can't live without a Nano! Totally regret selling my Cherry wood nano, but just pulled the trigger on another Cherry! I had to checkout as a "guest" because logging in always had it syntax error out when I clicked on my shipping address. No biggie, and i'm going to be ultra patient while my no light/no hole cherry nano gets created! Can't wait! Thanks Andy!
 
S

snamuh

ghost
biohacker said:
I could live without an EVO or Herbie (had both), but can't live without a Nano! Totally regret selling my Cherry wood nano, but just pulled the trigger on another Cherry! I had to checkout as a "guest" because logging in always had it syntax error out when I clicked on my shipping address. No biggie, and i'm going to be ultra patient while my no light/no hole cherry nano gets created! Can't wait! Thanks Andy!
Click to expand...
No light, no hole!? I love these wooden vapes...

A guy moved in down the road that makes sculptures with a chain saw... He has totem poll in his yard... Made me think of how cool a hand carved nano would be. Maybe even a spherical nano... ... So many ideas..

Does anyone know how the wood burning works with andy? Some cool things could be done with that too. If it was able to be burned completely all the way around.. 360 degree Pattern...

I need a job, and a legal state, or just more legal cbd.
 
MuushuPork

MuushuPork

Well-Known Member
snamuh said:
No light, no hole!? I love these wooden vapes...

A guy moved in down the road that makes sculptures with a chain saw... He has totem poll in his yard... Made me think of how cool a hand carved nano would be. Maybe even a spherical nano... ... So many ideas..

Does anyone know how the wood burning works with andy? Some cool things could be done with that too. If it was able to be burned completely all the way around.. 360 degree Pattern...

I need a job, and a legal state, or just more legal cbd.
Click to expand...

I think andy uses a shark with a laser on its head for his wood-burning. Get on top of that sculpting though cuz daddy like.
 
NickDlow

NickDlow

Log Hog
snamuh said:
No light, no hole!? I love these wooden vapes...

A guy moved in down the road that makes sculptures with a chain saw... He has totem poll in his yard... Made me think of how cool a hand carved nano would be. Maybe even a spherical nano... ... So many ideas..

Does anyone know how the wood burning works with andy? Some cool things could be done with that too. If it was able to be burned completely all the way around.. 360 degree Pattern...

I need a job, and a legal state, or just more legal cbd.
Click to expand...
Here is what andy told me regarding laser etching...

"I do offer custom laser engraving for an added charge. You can send in any black and white JPEG or PDF and I can etch it into your vape.
Andy"
 
ctxgooner

ctxgooner

gooner
There are ways to edit videos so that he doesnt give away his secrets......i dont know anything about wood-work,so i would be interested.....i got the idea from watching a few glass blowing videos....
 
ctxgooner,
  • Like
Reactions: SSVUN~YAH
flotntoke

flotntoke

thoroughly vaped
Not that I have the skills, but it just goes on a lathe and everything that is not a cylinder is removed, then a big hole cut in middle. Drill and cut a few holes (light and cord plug) and sand/finish. Would guess Andy does the same as most others and uses some type of jig to keep the size/shape the same from nano to nano. There are plenty of wood turning vids on youtube, and probably wouldn't have to look too far locally to see someone doing it in person. Here's a few vids. Most of the rest is probably just parts assembly.

If you're interested in turning yourself, it isn't too expensive to get started. I see lathes with enough tools to get started going for a couple hundred bucks at auctions and resale shops often. It's not what I would call easy, but doesn't seem too hard with some practice. Know a few people who turn bowls and stuff and they're not necessarily the most artistic or sharpest tools in the shed. Yes.. pun intended. :D
 
S

SecureSwede

Well-Known Member
No shipping confirmation, looks like my E-nano wont arrive by friday... Now Ill be stuck without it for 2 months. Might just end up having my roommate return it and I might get one later.

I just hope the dank gods bless it to arrive by friday :(. I was excited to have this vape, but its starting to look more and more like Ill end up not being able to use it.
 
SecureSwede,
  • Like
Reactions: ctxgooner
V

Vape4ever

Well-Known Member
I received my nano last week 3 days after getting an email from epicvape and I live on the east coast so the shipping was fast. However, I had received an email a week previous to this saying it had been shipped and it never showed up in tracking. I found out that it got returned to epicvape and they had to reship it - no idea why.

I really like the nano and switch between it and the Crafty which is my favorite portable.

I bought some extra's with the nano including the aluminum stand and I found one problem with it. If I push the nano down into the stand the cord is held so tightly that I can't remove the nano from the stand without first removing all the accessories from the stand and then using both hands to pry the nano cord out of the stand. Is this normal? I can rest the nano in the stand part way and it stays in place but I would prefer it would sit flat in the stand without getting locked in place by the cord. I'm thinking of either widening the cord opening in the stand (I know this would remove the finish and wouldn't look too good) or shaving away some of the plastic on the cord. Has anyone else had issues with the aluminum stand?
 
S

SecureSwede

Well-Known Member
ctxgooner said:
@SecureSwede
Cant your roommate ship it to where you're going?? Another expense,i understand,but im just saying.......

Im sending all of my karma and good wishes your way......you'll get it on friday,im sure of it :tup:
Click to expand...
Its not that easy, shipping to my apartment is always sketchy and I never really trust them. I am going to san francisco and have had packages left outside on the street before so I am going to avoid doing that. I honestly might just prefer having the money and stick to my firefly and volcano set up. Ill see what I end up doing but Im not really trying to pay for even more shipping costs on top of what I just paid for the e-nano. I usually expect a business to ship the day of or after especially since my nano was in stock. I know its just two guys but don't charge me money for 2 day shipping when its going to arrive 5+ days after I order it (or in my situation nearly 2 weeks after).

Essentially if I don't recieve it friday that means it will arive monday, and to pay for slow and cheap shipping I probably wont receive it until at least the end of next week. So in my mind Id rather just save my 200 bucks and maybe purchase it again at a different time or just not buy it at all.

I know I can have packages held but I dont really have a schedule that will allow me to pick up the nano while the post offices are open. I really hope it arrives, I really want to use this thing and see why you all love it so much but Im not going to waste my money/time just to get a vape
 
Last edited:
SecureSwede,
Sinclue

Sinclue

OK disagree with me, I can't force you to be right
SecureSwede said:
No shipping confirmation, looks like my E-nano wont arrive by friday... Now Ill be stuck without it for 2 months. Might just end up having my roommate return it and I might get one later.

I just hope the dank gods bless it to arrive by friday :(. I was excited to have this vape, but its starting to look more and more like Ill end up not being able to use it.
Click to expand...

Well, since he's essentially a one person operation perhaps he doesn't get around to sending out shipping confirmations until later in the day and you may still have hope. :tup:

:peace:
 
S

SecureSwede

Well-Known Member
Sinclue said:
Well, since he's essentially a one person operation perhaps he doesn't get around to sending out shipping confirmations until later in the day and you may still have hope. :tup:

:peace:
Click to expand...
Yea we will see, im giving them the benefit of the doubt. So hopefully it makes its way out of the office today, Im also in cali which is all the way across the country so things arent looking too great. Unless I am mistaken it looks like their offices are in NY and their mail goes to Cali.
 
SecureSwede,
S

SecureSwede

Well-Known Member
Reflections said:
@SecureSwede the usps usually doesnt update or even give true tracking..Andy is In California also so there is hope for you still. I live in california also and it took 5 days to get mine.
Click to expand...
Awesome, for some reason when I checked the site it said NY. Strange, but thanks for the info and yea I understand USPS is horrible with tracking, but it is priority 2 day so it comes standard with it. Im just used to sellers giving the tracking info fairly quick, I havnt dealt with a smaller company in a while I guess.
 
Uzer

Uzer

Well-Known Member
SecureSwede said:
Awesome, for some reason when I checked the site it said NY. Strange, but thanks for the info and yea I understand USPS is horrible with tracking, but it is priority 2 day so it comes standard with it. Im just used to sellers giving the tracking info fairly quick, I havnt dealt with a smaller company in a while I guess.
Click to expand...

My nano shipped from SANTA ANA, CA. Ordered Tuesday night, had it Friday afternoon on the east coast.
 
hafalump

hafalump

Well-Known Member
Vape4ever said:
If I push the nano down into the stand the cord is held so tightly that I can't remove the nano from the stand without first removing all the accessories from the stand and then using both hands to pry the nano cord out of the stand. Is this normal?
Click to expand...

If you have table set up get some sticky velcro tape, mine is wood and fits loose, but I have it attached to a tray with all my other goodies for portability :nod:
 
lowrider

lowrider

Well-Known Member
SecureSwede said:
Might just end up having my roommate return it and I might get one later.
Click to expand...

This won't work either. Once he gets his gruby little hands on it, he will not turn loose. I can see it now.

SecureSwede: Did you return that package from Epicvpae for me bro?
SecureSwede Roomate: Yeah bro, sure, like I think so bro. Hold on, wait, no bro, here it is on 8 for a Vape.
 
You must log in or register to reply here.
Top Bottom