E-Nano from Epickai

[Enchantre]

Question for ya'll - I'm loving my Nano with a J-hook, but I just purchased a wand from @VaPeD&CoNfUsEd (still no word from Andy on my missing wand).

How do you prevent the herb from falling into the Nano's heating element when hitting the wand upright? Or do you never use the nano in the upright position? Do you hold it at a 90 degree angle parallel to the floor?

Yup, gravity is not your friend.

There are a couple of techniques, and a bit of magic.

Medium shred/grind, or finger-shred. I suck the herb into the stem from my Jyar, then adjust the amount. I just (can't sound NOT crude) suck it fairly tight in there, then hold it so the herb won't fall out, and slip the Nano on. Give it a good hit, and the magic happens - until you stir it, it will stick there, probably from the heat, maybe a little resin release, whatever.

Or, you can put your herb between two basket screens. You can have the surface of the near screen just clear the heater core, and get amazing results with no fear of herb loss. Can't stir it easily, however. I have played with using very little herb between screens, so that the herb can move around a bit, and that works okay, too.

 

[Delta3DStudios]

Thanks, it sounds like using a j-hook is a more comfortable method of enjoying the Nano over the wand.

 

[hoyo77]

So both of you didn't read the post by @Stu right above yours @Tweak @hoyo77 ?

well ah you see, what had happened was I just finished a session of my meds and I guess I might have over medicated and the words on his post were dancing about so I did the best I could to conjugate a proper sentence to respond back to him...what I miss? lolololol

 

[Tweak]

Thanks, it sounds like using a j-hook is a more comfortable method of enjoying the Nano over the wand.

I used a j-hook for awhile but didn't like balancing the nano on top, makes it hard to pass around and lay it down, IMO. Was much cooler vapor than a straight stem though.

Using a screen on top of the stem lets me shake the contents instead of stirring . And you don't need to worry about AVB falling out when laying the stem down after a session.

what I miss? lolololol

I'm guessing he means:

General Forum Etiquette

• Stay on topic. Please avoid derailing or side-tracking discussions.

To which I reply

FC Forum Rules

• If you feel someone is breaking the rules or causing some kind of problem, don’t try to deal with it yourself. Use the Report feature located at the bottom of each post.

 

[hoyo77]

My sincere apologies for all the tom foolery and shenanigans I caused dis morning. Back on topic. Enano FTW!!!!

 

[Herr_Dampf]

Yes it seems that would have been a better idea in retrospect...

In other news, my Nano just arrived. 67 USD in custom fees, taxes and fines because a false total was declared while a packaging slip with the true total was added. Smooth move.
While it is beautiful, it looks nothing like what I had expected. I orderd the maple burl based on the picture that showed the one Caligula got (who placed the order before me. Seriously, he orderd right before me) http://fuckcombustion.com/threads/e-nano-from-epicvape.7844/page-232#post-604475
Not that big of a deal, I just kinda hoped for a similar nestled light.

Mine:

One thing right away: It looks really beautiful and this shitty pic can't do the grain any justice.
Better pictures & videos when my grumpiness subsides.

 

[MuushuPork]

Thanks, it sounds like using a j-hook is a more comfortable method of enjoying the Nano over the wand.

I use my glass mostly, but it is a very simple and pleasant way to hit if you have a proper stem, sorry you didn't get yours. Im waiting on Joda to learn how to bend tubing.

 

[jimbob]

Yes it seems that would have been a better idea in retrospect...

In other news, my Nano just arrived. 67 USD in custom fees, taxes and fines because a false total was declared while a packaging slip with the true total was added. Smooth move.
While it is beautiful, it looks nothing like what I had expected. I orderd the maple burl based on the picture that showed the one Caligula got (who placed the order before me. Seriously, he orderd right before me) http://fuckcombustion.com/threads/e-nano-from-epicvape.7844/page-232#post-604475

Mine:

Better pictures & videos when my grumpiness subsides.

Can I buy it off you?

Sucks about the extra costs, but I think that's a gorgeous piece.

 

[Reflections]

congrats on getting yours Herr_Dampf..she sure is a beauty...

@ ratchett when i use my glass stem i just tear off nugs and gently tamp it down and dont have to worry bout anything falling out.. then i stir when needed and then tamp some more... just my method

 

[fregglepops]

Does the enano have an off switch or do people just switch it off at the plug? The dial seems to refer to an off position but it also goes up to 12 so I guess that's not to be taken seriuosly?

I just had to pay a £6 pound customs vat charge (plus an £8 royal mail handling fee) in order to receive my enano in the UK, have other people in the UK been hit with a similar charge?

As a recently diagnosed asthmatic, I was a little bit worried about the heat when direct drawing it. However, it is MUCH easier on my lungs than the whip method on my Arizer Extreme Q so I am very pleased with the purchase so far.

Hey just interested to know when you ordered your unit? I'm a uk customer and I ordered a week ago and still no unit.........was wondering how long yours took to arrive?

 

[Herr_Dampf]

Hey just interested to know when you ordered your unit? I'm a uk customer and I ordered a week ago and still no unit.........was wondering how long yours took to arrive?

Another euro customer here. Mine took exactly one week, including one day of customs inspections.

 

[fregglepops]

Another euro customer here. Mine took exactly one week, including one day of customs inspections.

Ok thanks @Herr_Dampff I shall try to be patient......I can wait weeks and weeks for a crop to be ready but useless at waiting for gadgets........just need the afgoo to finish off then the Superbud too. With that,my Nano and the new solo i'm away to buy then I should be havin an interesting cupla weeks!!!

 

[Herr_Dampf]

Ok thanks @Herr_Dampff I shall try to be patient......I can wait weeks and weeks for a crop to be ready but useless at waiting for gadgets........just need the afgoo to finish off then the Superbud too. With that,my Nano and the new solo i'm away to buy then I should be havin an interesting cupla weeks!!!

I can tell you, you will love the nano. Oh my do I.

She sure is a beauty:

Front

Left

Right

Back:

 

[Dafni]

Nice one! I'm happy for you mate, enjoy the nano love

 

[MuushuPork]

Yes it seems that would have been a better idea in retrospect...

In other news, my Nano just arrived. 67 USD in custom fees, taxes and fines because a false total was declared while a packaging slip with the true total was added. Smooth move.
While it is beautiful, it looks nothing like what I had expected. I orderd the maple burl based on the picture that showed the one Caligula got (who placed the order before me. Seriously, he orderd right before me) http://fuckcombustion.com/threads/e-nano-from-epicvape.7844/page-232#post-604475
Not that big of a deal, I just kinda hoped for a similar nestled light.

Mine:

One thing right away: It looks really beautiful and this shitty pic can't do the grain any justice.
Better pictures & videos when my grumpiness subsides.

I prefer yours, i feel like the other one is crumbling apart.

 

[Highplanedrifter]

That is gorgeous, pure vapeart. Lucky you! As to your other troubles if it helps
Try to remember " quality remains long after the price is forgotten "

 

[ACE OF VAPE]

@Herr_Dampf- sorry about that. The software has been modified now to take prices off the packing list.

 

[SSVUN~YAH]

I can tell you, you will love the nano. Oh my do I.

She sure is a beauty:

Front

Left

Right

Back:

OMG Amazing! I really like the high face in the "Left" photo!!! Reminds me of this Enjoy that work of art!

 

[Delerrar]

@Ratchett Don't know why everyone has to hit it horizontally. I just vacuum up my herb and go to town. The odd big piece falls out but I catch them because I hold it over my hand first. I've only used mine vertically.

 

[MuushuPork]

@Ratchett Don't know why everyone has to hit it horizontally. I just vacuum up my herb and go to town. The odd big piece falls out but I catch them because I hold it over my hand first. I've only used mine vertically.

I tried both ways and prefer the horizontal mombo. No other reason.

 

[fregglepops]

Any Uk user? Anybody know who takes over responsibility for my baby when she hits the UK? ANYONE? n e one?????? HAHA

@Herr_Dampf- sorry about that. The software has been modified now to take prices off the packing list.

Hey Andy will I have to do that as well? No Biggie like. Cheers!!!!

 

[Herr_Dampf]

@Herr_Dampf- sorry about that. The software has been modified now to take prices off the packing list.

That's cool but in that case they would just hold on to the package and request a receipt, I think I will just add a note to my next order to declare the real value, doesn't seem wort the hassle. Guess the EV-2 slipped through, never had to pay anything for that one

 

[Caligula]

I prefer yours, i feel like the other one is crumbling apart.

Yea Herr got a pretty nice unit sen... hey, wait a minute!

 

[MuushuPork]

Yea Herr got a pretty nice unit sen... hey, wait a minute!

:whistle:

 

[dos equis]

Any Uk user? Anybody know who takes over responsibility for my baby when she hits the UK? ANYONE? n e one?????? HAHA

A quick Google search says either Royal Mail or Parcel Force, you could try checking if the tracking number works in their systems.