E-Nano from Epickai
nihil
Member, Known Well
SIMPLE! Take a Q-Tip, wet it with ISO, squeeze it out til moist, swab the inside, done!
EDIT: Screens are removable, cleanable, replaceable.
Perfect. Thank you.
herbivore21
Well-Known Member
You could certainly do this
I cut and rejoined my cable without a dimmer in it. It will not matter if you turn the wires around or not 
Without a dimmer on it, do you mean that you removed the temp dial altogether? If yes, what non-variable temp level is being achieved without it?You could certainly do this
herbivore21
Well-Known Member
10 is the temp you get when you remove the dial. Yes, this is what I did, removed the dimmer (which I broke by running 240v through it lol).
I see this modification as no problem whatsoever, particularly with the advent of the adjustable screen/load position. Thanks!!!
You void the warranty if you open it.
Thanks for the love @flotntoke.
On a side note. For some reason I looked over at my end table, saw this and instantly thought of @ataxian. So I figured I'd post it. Lol
On a side note. For some reason I looked over at my end table, saw this and instantly thought of @ataxian. So I figured I'd post it. Lol
hoyo77
Well-Known Member
ok...I have been trolling this thread for a while now. It reminds a bit of the aroma zap and eterras from back in the day. I used to own an aromazap. here is the ?, It looks like the herb would fall out if you are grinding it. I notice some people are using a 2 screen method. is that really necessary?? in my aromazap I just packed the stem full..the clouds look nice and I notice people talk about taste. how does taste compare to say a firefly, lotus, or hammer. I have all 3..i know they are different vapes but I am just looking for a subjective opinion I guess. when my wallet gets back healthy will probably get one.
herbivore21
Well-Known Member
Taste is far better than the Lotus, I own both
P.S. I just gave new life to my original broken GonG with a very, very sloppy hxtal repair! IT LIVES IT LIVES!!!!!!! The crackles are caked on bits which I am to chisel away once it has cured a bit more!
P.S. I just gave new life to my original broken GonG with a very, very sloppy hxtal repair! IT LIVES IT LIVES!!!!!!! The crackles are caked on bits which I am to chisel away once it has cured a bit more!
Last edited:
Silent
HEY, HEY, HEYHEEEY, VAPE WEED EVERY DAY
flotntoke
thoroughly vaped
To each his own, but IMO that is way too hot for nugs (concentrates are a whole different beast). Guess it depends what you want out of your vapor, and a bit on how hot your individual nano runs. I usually run between 6-7 through water, sometimes a bit lower, depending on strain, distance of screen and where I'm trying to get. At 6.5 my abv is dark brown (coffee colored) after 2 or 3 good hits. Those hits are cloudy, but my vapor evaporates out of the air in much less than a minute after exhaled. FWIW, 6 and a pretty close load is where I usually end up.
Hard to say for certain if you are combusting. But if your duff is charred black and sooty, you probably are. Many people think combustion is instantaneous - I think because of experiences with flame - and that can definitely happen with a vaporizor too. But with a small tight space like the end of a nano tube, I think it's possible to combust a little while pulling vapor (cherry red or not). Or, at least you build the temp up so high you're getting the same results - both with your abv and your buzz (and obviously the components you're pulling from your material). So, you're getting some smoke mixed in with your vapor - probably more on later hits.
Nothing really wrong with that if that's what you're looking for. You can certainly get more of a "heavier" stoning. But for the most flavor and best vaporish head highs, I'd suggest you roll back the dial a notch or so. You'll also probably find that you won't feel as burnt out later - though the munchies may even be a little worse!
hoyo77
Well-Known Member
ok that is good to know...can you talk to me about the stem process. do you grind or put in small nuggets. I notice it does come with a neat stir stick tool...Taste is far better than the Lotus, I own both
P.S. I just gave new life to my original broken GonG with a very, very sloppy hxtal repair! IT LIVES IT LIVES!!!!!!! The crackles are caked on bits which I am to chisel away once it has cured a bit more!
herbivore21
Well-Known Member
@hoyo77 I personally grind not too finely and don't pack down the herb. I use .05-.1g of herb. The stir stick is very handy, especially for packing oils into my GonGs You can stick nugs in so long as there is space for air to get around/through the nug. Don't jam it in there, small bits will do better IME.
In fact, I've had a long day and I think it is high time I got into that dab stash of mine!
You can stick nugs in so long as there is space for air to get around/through the nug. Don't jam it in there, small bits will do better IME. In fact, I've had a long day and I think it is high time I got into that dab stash of mine!
flotntoke
thoroughly vaped
You can do either. I do both depending on circumstances. When using nuggets I find it best to give them a crush and stir with the e-pic after the first hit or two. If I'm lucky enough to have a good strain, this is my preferred method.
With lesser strains, I generally grind a little to extract all I can quickly. If you do grind, extraction is quicker and your clouds will be thicker. But, you'll cash your load much faster too.
demonscars
Well-Known Member
I've never used any of those vapes, but I'd say it's more flavorful than a MFLB. Equally tasty, just more of it. The herb falling out can be problematic if like me you can be a little clumsy, but it sticks in there pretty good even with grinding. It's not something I even think of anymore except when telling someone how to use it the first time.
Caligula
Maximus
@waaldron
You're doing it wrong if that's the case. What type of Gong are you using? Did it come with an adjustable basket screen?
Your load is obviously placed wrong if the heater is touch it once the nano is inserted.
Besides that, what heat level are you trying? Do you grind or whole nugs?
Also are you preheating your nano before use? The wood should be warm to the touch like a warm mug of coffee when it's at its optimal temp. If the unit is cold I usually crank it up to 10 for 10 minutes then let it sit for another minute after I dial it down to 7 or whatever heat level I'm going to be using it at.
You're doing it wrong if that's the case. What type of Gong are you using? Did it come with an adjustable basket screen?
Your load is obviously placed wrong if the heater is touch it once the nano is inserted.
Besides that, what heat level are you trying? Do you grind or whole nugs?
Also are you preheating your nano before use? The wood should be warm to the touch like a warm mug of coffee when it's at its optimal temp. If the unit is cold I usually crank it up to 10 for 10 minutes then let it sit for another minute after I dial it down to 7 or whatever heat level I'm going to be using it at.
The adjustabowl gong. And yes wood is warm to touch. How do I keep the heating element from crushing the weed down.