E-Nano from Epickai

[Silent]

@as, do you not find the kief to char at 10? I vape kief a lot (recently bought 5g of kief) but the more I vape with my e-nano I'm finding 10 to be too high for pretty much anything for me. I seem to combust any kief or qwiso or hash I vape at a 10. Maybe its my draw speed, but even with a bubbler, 10 seems like overkill for me, 8-9 seems great for concentrates, with 6.5-7 being ideal for flowers.

It could also be because I'm using a power adaptor? I live in England so i guess that could have something to do with it? I feel it's far more likely to be my draw speed though.

 

[Tweak]

Sorry I'm having trouble with the quotes on this shitty tablet.

I give up posting with a tablet. Takes forever and I still don't get anything done.

ill just put a screen on the bottom as well.

I use a trimmed basket screen, so it is a bit smaller than normal basket screens. And I chose the smallest screen Andy sent me.
I also removed the screen on the heat port along with the retaining clamp, gives me a bit better airflow and more even vaping.

 

[skipbifferty]

Hey everyone, I've got a slightly technical question. I've been talking about the distance between my dimmer switch and the enano being too short and I've been worried about unsoldering the connections at the dimmer switch to increase it. The easier way would be simply to join some extra wire to the cord going into the enano. However, in order for that to work, I would have to make the connection very durable because it would most likely sit on my lap most of the time.

Couldn't I just cut the wire between the plug and the switch, and then disconnect the wire at the enano crimps and then simply turn it around? If I did this, and the switch ended up being the opposite way to before, does it matter if the electrical current is going the other way? Would the enano/switch continue to work? I would then have the DIY connection near to the plug so I wouldn't be worried about the strength so much.

 

[as]

@as, do you not find the kief to char at 10? I vape kief a lot (recently bought 5g of kief) but the more I vape with my e-nano I'm finding 10 to be too high for pretty much anything for me. I seem to combust any kief or qwiso or hash I vape at a 10. Maybe its my draw speed, but even with a bubbler, 10 seems like overkill for me, 8-9 seems great for concentrates, with 6.5-7 being ideal for flowers.

It could also be because I'm using a power adaptor? I live in England so i guess that could have something to do with it? I feel it's far more likely to be my draw speed though.

What do you mean by char
To me a cherry = combustion
On 10 with kief I get no cherry
For herb I use 8.5-9 (9 will combust with some herb or a slower draw speed)
I like high temps
I am also from the UK and use an voltage converter
Maybe my nano runs Cool?

 

[Herbalist23]

Hey nano nation, for everyone who wants to use extra screens to prevent the herb falling out on the heating element, just try the Vapir No2 screens
You just have to cut off the little edge and they work really great then
I usually use pointed tweezers to get them out or lift up a bit to shake the goods

 

[Caligula]

Hey everyone, I've got a slightly technical question. I've been talking about the distance between my dimmer switch and the enano being too short and I've been worried about unsoldering the connections at the dimmer switch to increase it. The easier way would be simply to join some extra wire to the cord going into the enano. However, in order for that to work, I would have to make the connection very durable because it would most likely sit on my lap most of the time.

Couldn't I just cut the wire between the plug and the switch, and then disconnect the wire at the enano crimps and then simply turn it around? If I did this, and the switch ended up being the opposite way to before, does it matter if the electrical current is going the other way? Would the enano/switch continue to work? I would then have the DIY connection near to the plug so I wouldn't be worried about the strength so much.

I think @herbivore21 did this. Of course hes probably asleep ATM given that hes down under.

 

[Mrmrmrmr]

Your enano has to be running cooler @as. I know the heat difference between enano's isn't that great. I hardly ever hit 7 on the dial myself. My comfort zone is 6-6.5. Still getting huge clouds mind you.

 

[Snappo]

There's a lot of great new stuff heading our way from Ed's TnT for the E-Nano! Check out some of these Heirloom Quality gems hot off the press! Can't wait to receive my custom new Nano stems & wongs so I can share some pics with y'all!!! Here's a small preview!!!

These can be made for the Nano too!!!

 

[Caligula]

Holy shit bro!

 

[VaPeD&CoNfUsEd]

Just beautiful @Ed's TnT !!!!

 

[dudewuterson]

Just got the news that my e-nano has shipped. So stoked!

 

[Reflections]

Sees all of us becoming Wong'as and JoDa'as along with Gas and Vas

 

[Direcious]

Think it's worth recording if the only piece I have for it is this?

 

[sweettooth]

What do you mean by char
To me a cherry = combustion
On 10 with kief I get no cherry
For herb I use 8.5-9 (9 will combust with some herb or a slower draw speed)
I like high temps
I am also from the UK and use an voltage converter
Maybe my nano runs Cool?

nah mine does the same mate im from the uk to and iv combusted on those temps as well. I think its draw speed. Also be careful with that honeycomb bong as they break easy especially at the base. Thats what happened to mine when i cleaned it.

 

[SSVUN~YAH]

Think it's worth recording if the only piece I have for it is this?

 

[as]

Think it's worth recording if the only piece I have for it is this?

We need videos got the popcorn out now don't let me down man

 

[Snappo]

Think it's worth recording if the only piece I have for it is this?

Please be sure to let us know what setting you're using, load (herb or other), and show us the big cloudy exhale since your glass isn't transparent and we won't see it fogging up.

 

[Caligula]

VIDS OR IT DIDNT HAPPEN!

 

[Tweak]

HORIZONTAL VIDS OR IT DIDNT HAPPEN!

FTFY,

 

[Caligula]

Duuuuuuuuuuuuuuude, its hard to get everything in the shot with taller pieces that way and still be close enough for detail. Remember I do static shot takes, and I dont have anyone to zoom in and move the camera on demand

 

[Snappo]

This Ed's design kicks major ass! It's perfect for the Nano!

 

[Vitolo]

I find water gets me slightly less high from the same sized puff of the same amount of the same stuff.

I have always found this.
It is the feeling of a couple absent constituents is how I can describe the feeling.
One hit without water feels better to me than 3 with water...
although the 3 with water will make me more medicated.. there seems to be a feeling missing!

 

[Snappo]

I have always found this.
It is the feeling of a couple absent constituents is how I can describe the feeling.
One hit without water feels better to me than 3 with water...
although the 3 with water will make me more medicated.. there seems to be a feeling missing!

I have also contemplated this difference, and speculated that the difference is in the terpines that are heavier, intercepted, and left behind in the water diffusion process. The synergistic effects of terpines with the other herb constituents are still highly studied and theorized, but I think our personal experiences may give some credibility to the theory.

 

[nihil]

I'm really liking Ed's work but how do you clean them?

 

[Snappo]

I'm really liking Ed's work but how do you clean them?

SIMPLE! Take a Q-Tip, wet it with ISO, squeeze it out til moist, swab the inside, done!

EDIT: Screens are removable, cleanable, replaceable.