E-Nano from Epickai

biohacker

biohacker

H.R.E.A.M
@Silent, it IS important IMO. I think Andy's business is taking off and he hired a new girl (my invoice personally signed by Nadia) so there may be some growing pains or oversight. The one thing is that Andy kicks ass and will make things right. I look forward to supporting this company for years and years to come and feel like I just wanna sing out all my praises for this kick ass affordable efficient quality vaporizer. But I don't wanna sound too repetitive! lol

baltik said:
I don't know if it's the density of the buds or my technique but when I use whole buds I have to pack then down a bit to keep them from touching the heater and the screen shifts... When I grind I have no such issues
Click to expand...

Do you have Andy's screens? They will not shift.

equatorgringo said:
Soooo after like 30 mins of browsing I now want to buy an e-nano. Special thanks to @Caligula for those recent milk vids with his new efs piece. Is the e-nano best purchased through epic vape? As well as the gongs? This thing is going to be awesome!
Click to expand...

You will not regret it!
 
A

as

Well-Known Member
My nano got shipped to the wrong address and was delayed buy a week Andy gave me a free all glass stem or he may have upgrded it to a all glass from a pinched not sure but still he did not have to do that he dose not like customers to be let down at all he will not stand for it I'm sure someone got upgraded to an exotic for free he is the MAN!!
 
Tweak

Tweak

T\/\/34|<
PPN said:
Dry the taste is fantastic if you stay beyond level 7, I posted some weeks ago about a heating issue (heat was not all the time the same at the same level, sometime more, sometime less) IDK why but now issue fixed, it heat like a beast.
Click to expand...

Mine was a little wonky at first, but I think my issue was not letting the Nano preheat enough. Consistency in heat is the key, I now let the Nano preheat for a good 5-10 minutes or until the wood is warm.

baltik said:
keep them from touching the heater
Click to expand...

As I mentioned earlier in the thread, I have found using a top screen (slightly shortened basket screen) works great for preventing the heater screen from touching your materials. This top screen allows for peace of mind that your material will not fall out, lets you shake your stem instead of stirring, lets you use the stem inverted w/o worries, and one of the best features is the ability to leave the GonG on your bubbler after clearing, no need to lift the GonG as the material will not be blown out of it.
 
Newcastle

Newcastle

Stoned!
Silent that is great to read your reviews as I also use the EQ. I will be ordering my E Nano at the end of the month!:clap: Now I just have to pic out what I want. I love the maple and he has some awesome pieces on his site now. Oops I didn't say that...Don't look! There is nothing to see there. :lol: I can't order mine until the end of the month.
 
Silent

Silent

HEY, HEY, HEYHEEEY, VAPE WEED EVERY DAY
Newcastle said:
Silent that is great to read your reviews as I also use the EQ. I will be ordering my E Nano at the end of the month!:clap:
Click to expand...


I am just about to try a small kief bowl before dinner, will report back as to how it went. I have to have done literally hundreds of kief elbows in my EQ so I have a wide "sample range" to compare too!
 
SSVUN~YAH

SSVUN~YAH

You Must Unlearn, What You Have Learned...
Back in the EV club!!! Got a nano this time, with plenty of gongs! I'm super stoked!!

a24f68362e11129dff9c9b2d99898f589c66b8f487324ff5fdcfaac337783e94.jpg
 
Silent

Silent

HEY, HEY, HEYHEEEY, VAPE WEED EVERY DAY
Well, Dinners ready. I couldn't even finish the kief bowl. I set my nano to 7.5 and thought "Oh, this bowl is only small" (probably around 0.1g kief? Maybe less...) "I'll be able to one hit this easily!". So I pulled. And pulled. And pulled. And then coughed my lungs out. This tiny bowl has beaten me! I had managed to get 3 more HUGE white walled pulls from this and I think there still more left but I can't put off eating any longer my dinner will be cold.

I know this is going to be the best shepherds pie I've ever eaten :nod:

Will try to finish this bowl after dinner :rockon:
 
ACE OF VAPE

ACE OF VAPE

Vape outside the box
Manufacturer
Teedub said:
Hellzzz yehh, woke up to a nice box on my doorstep yesterday morning. Nano and ev2 all at once!

Let them heat up somewhat then tried the nano at 6, got some average clouds golden abv so kept bumping the temp slightly up till I realised I was totally f ing gone!
Such tiny amounts, seemingly low temp. It extracted some low temp potent actives I don't usually notice to that degree from that temp & amount. The abv looked barely touched but some magic smacked me in the head outta no where. I usually like high temp but I will be exploring that temp range some more for sure!

So I've been up the dial starting from 6. I've been rocking it around 8 to get that one hit even dark abv, tried 9 and got a bit of charing in the middle. Im gonna head back down the temps a touch now that I've seen her hot and sweaty side. I like that its got the range to keep going. Cant wait for concentrates.

I just can't believe how efficient the nano is, I don't usually weigh up but I did tonight for fun .025 (as recommended on the epic site) which is like nothing compared to an old combustion cone/bowl. Really gets some goodness out of nothing. I keep laughing when I tip out the avb, its the smallest of crumbs!
And restriction is very light on the little loads. :)

Really been loving my first night :science: mainly been getting to know nanobot and I can already say I love her, the walnut looks gorgeous. Love the size and ease of use with water. Works great at low and high temps. Flavour is kick ass.

Hats off Andy, nice bloody work. I'm sold on this one! :)

The only downer is my nano makes a rattle/re verb noise, sounds 'tingy' like the ceramic heater is touching/vibrates inside against the metal tube. I hear it every time i put the nano down on the table and I even have a cushioned cork bench top. If I tap it ever so slightly with my finger I can also hear it.

Does anyone else's nano make a rattle/reverb noise?
I'm worried the ceramic may be loose or damaged from transport. Is there anyway to tell?

2meol6h.jpg
Click to expand...
The rattle can be annoying but it won't affect performance. It requires a shim to make it go away. It's not really a do it yourself repair. You can send it back at anytime and I'll fix it.
Btw I've been in Denver all week checking out what legalization looks like. Sorry if I've been slow responding to emails and such.
 
D

demonscars

Well-Known Member
I really hope mine has a stem, I don't have any others and my bubbler won't be here for a while. I'm hoping my nano might arrive soon, the tracking seems to have gone off the rails and gotten stuck or something. It still says it should be delivered yesterday.
 
demonscars,
herbivore21

herbivore21

Well-Known Member
Caligula knows the score here.

I found the same thing, charred tops of my nugs when I put a single whole one that was about the diameter of the stem in. Small nugs is the way to go. There needs to be space for the air to flow around the nug, as well as through it. Especially if your nugs are super dense like what I have at the moment!
 
ataxian

ataxian

PALE BLUE DOT
ACE OF VAPE said:
The rattle can be annoying but it won't affect performance. It requires a shim to make it go away. It's not really a do it yourself repair. You can send it back at anytime and I'll fix it.
Btw I've been in Denver all week checking out what legalization looks like. Sorry if I've been slow responding to emails and such.
Click to expand...
The NANO's size and power is so fitting for most water tools!

Doctor's need to tell all their patients that the NANO is a affordable medical vaporizing device!
 
HSIHP

HSIHP

Well-Known Member
Anyone have any advice on which wood to get? I have always loved walnut ( I have a firewood and a MLB in walnut) but for some reason the cherry keeps calling my name.
 
D

demonscars

Well-Known Member
Got my e-nano this morning! Only used it once so far but have found it super easy to use and really enjoying it. My only minor thing is the light doesn't come on but everything else is perfect and the light isn't really necessary. It's really quite wonderful. Light but sturdy, beautiful looking, you could leave it out somewhere and people would think it was a decoration, seems to use very little herb, taste is superb. Now I can't wait to really read though here and try some various tips and tricks!
 
Snappo

Snappo

Caveat Emptor - "A Billion People Can Be Wrong!"
Accessory Maker
Just received my Exotic Wave Maple Burl E-Nano - the beauty of this beast must be seen to be believed!!! Photos posted don't do justice to this stunning masterpiece of form & function. Will report with review & pics pending first use. Cheers to all!!! Thanks Andy!!!
 
Last edited:
You must log in or register to reply here.
Top Bottom