E-Nano from Epickai

herbivore21

herbivore21

Well-Known Member
I have been using the Nano with QWISO hash only at the moment. No flowers about. Damn I hate living in a prohibition society. Dicks! I try to remember not to leave it on setting 10, but sometimes manage to leave it on there for five hours at a time or so. No worries at all with cracking, and my wood already had some natural cracks in the grain strictly due to the kind of wood. I wonder if Andy might know which kinds of wood tend to handle high heats for long periods better? @ACE OF VAPE

I would definitely recommend using SS wool to vape it off, it is amazing and reclaimable!
 
Lahey

Lahey

Cruisin'
Lahey said:
I will have to wait until later tonight to finish them both off and show the ABV, but I'm sure you can imagine that with 2-3 more hits and a bit of stirring they will both come out nice and even.
Click to expand...

Just to follow up, here are the same 2 GonG's, finished off at the same temp (7.4,) one to each E-Nano, paired with the 12" honeycomb tube as before. 4 hits total to each GonG, stirring between each.

rqVWjYM.jpg


I want to be clear that I am not trying to find fault with the E-Nano. I'm only trying to understand it better because I'm so blown away by it. It is far and away the best vaporizer I have ever used and has totally exceeded my expectations in every way. I can already see myself buying these as gifts for people in the not too distant future, and that's just until I can justify owning more than two for myself.

Happy vaping :peace:
 
Last edited:
A

as

Well-Known Member
The main difference is on the inside the old stress relief was just a bit of tubing other the wier that sort of wedged the wire in the gap the new one has a lip on the inside to hold it in more the wire is about half a foot longer from nano to dimmer grate for me as the dimmer hits the floor and dose not move my nano before t would hang and some time pull the nano over so I had to be cearfull
 
Lahey

Lahey

Cruisin'
Herbalist23 said:
@Lahey, would you be so kind to post a side by side picture from the stress reliefs?
TIA
Click to expand...

You can't tell a whole lot by looking at it, but the cable just feels better. The rubber feels tougher and less stiff. I have not opened up the new one yet, but the stress relief sleeve having a lip on the inside of the unit to hold it fast sounds like a good thing too. The dimmer is at least 6" further down the cable away from the Nano, as as mentioned, and the whole thing is at least a couple feet longer. I haven't had any problems with the original cable on my 1st Nano, but the new one definitely feels like an improvement.

EdAG2q9.jpg
 
A

as

Well-Known Member
No my dimmer fucked up on my nano and I got ace of vapes to send me a new one and got one with the new stress relief IMO it is a good improvement tho mine was fine in the 1st place also I really love the longer bit from nano to dimmer
 
H

Herbalist23

Well-Known Member
as said:
No my dimmer fucked up on my nano and I got ace of vapes to send me a new one and got one with the new stress relief IMO it is a good improvement tho mine was fine in the 1st place also I really love the longer bit from nano to dimmer
Click to expand...

So you have to carve the hole out a bit or make it kind of rounded to fit in the new cord, cause it is a bit larger??
 
Herbalist23,
  • Like
Reactions: steama
B

baltik

Well-Known Member
Is there consensus on what sort of glass pairs well with the nano - something that preserves taste ideally? Would one of the Chinese D020 work well or do I need something bigger like an Ion?
 
baltik,
  • Like
Reactions: steama
Mrmrmrmr

Mrmrmrmr

Well-Known Member
I have two different styles of cord on each enano. I much prefer the thicker one (the extra length helps).
Here is the dual enano video, I couldn't get the best lighting so I'm trying again tonight. I was going to say in the name of science , something makes
Me think you all have heard that before;):science:
 
Tweak

Tweak

T\/\/34|<
steama said:
Is the pinch we are speaking of the type that act as a glass screen only a glass pinch (3 little arms)?
Click to expand...

If I'm not mistaken, the pinch is a narrower spot on the glass that just prevents the dome screen from sliding past the pinch. Kinda like how the SSV wands are.

The adjust-a-bowl is completely wide open, so there is a possibility of pushing the screen too far and it falling out the male joint side.
 
skipbifferty

skipbifferty

Well-Known Member
baltik said:
Is there consensus on what sort of glass pairs well with the nano - something that preserves taste ideally? Would one of the Chinese D020 work well or do I need something bigger like an Ion?
Click to expand...
I got the D020 about a month ago so thought I'd give my experience. I haven't tried grinding the weed, so far I've only used whole buds, but all the times I've used it I can't seem to get enough air through the D020. I might be wrong but I suspect the problem lies not with the D020 but actually with the slightly restrictive draw of the enano. I say that because I find it difficult to imagine a water tool with less restriction than the D020. Without the enano on top, it's really really easy to get bubbles. I've also tried the d020 with my Eq vaporizer and I get a much easier pull that way. Does anyone have any suggestions?

Concerning taste, although there is definitely quite a reduction in taste there's still enough taste there to be quite satisfying I think.
 
ataxian

ataxian

PALE BLUE DOT
cawshook said:
Is it ok to run it at highest temperature for like 5 hours or so? My friend needs a vaporizer and he really loves hash. Might use it exclusively for hash.
Click to expand...
For concentrates I found that the NANO is all you neeD!

{SHATTER; HASH; WAX; OIL; POLLEN PELLETS} No problem!

For FLOWERS 6.5
Concentrate 8.0

I take a small piece of cotton and wrap it around the concentrate.

I vake through water path.

No need to dab!

The NANO does it all!

Plus it's little, tiny!

No need for a big bulky vaporizer!

Unless big belt buckles and lifted 4 x 4's in the city are your thing?
skipbifferty said:
I got the D020 about a month ago so thought I'd give my experience. I haven't tried grinding the weed, so far I've only used whole buds, but all the times I've used it I can't seem to get enough air through the D020. I might be wrong but I suspect the problem lies not with the D020 but actually with the slightly restrictive draw of the enano. I say that because I find it difficult to imagine a water tool with less restriction than the D020. Without the enano on top, it's really really easy to get bubbles. I've also tried the d020 with my Eq vaporizer and I get a much easier pull that way. Does anyone have any suggestions?

Concerning taste, although there is definitely quite a reduction in taste there's still enough taste there to be quite satisfying I think.
Click to expand...
The D020 requires the water level to be just above the diffuser.

I'll go do a session pairing the NANO with the D020 for complete Blissful Nirvana!

Give me 60 minutes.
 
skipbifferty

skipbifferty

Well-Known Member
ataxian said:
The D020 requires the water level to be just above the diffuser.

I'll go do a session pairing the NANO with the D020 for complete Blissful Nirvana!

Give me 60 minutes.
Click to expand...

That's exactly where I have my water level but I still find it too restrictive.
 
skipbifferty,
  • Like
Reactions: ataxian
skipbifferty

skipbifferty

Well-Known Member
Yes, we definitely have the same bubblers, thanks for getting back to us. I think I'm probably not used to not having heat (being my first water tool) and also to drawing from a wider mouthpiece. Also, the concentration of the cannabis must be less than drawing from the dry stem because, just guessing, the volume must be at least 5 times the volume in a dry stem. I must be trying to suck too hard to try get a similar amount of cannabis in my throat compared to when I use a dry stem.
 
skipbifferty,
  • Like
Reactions: ataxian
You must log in or register to reply here.
Top Bottom