E-Nano from Epickai

ataxian

ataxian

PALE BLUE DOT
Mr. Gweilo 420 said:
Me too and my heat up time is at least 10 minutes. I suspect two things. Local power supply is weak. Step down converter needs replacing with more expensive model. My Infinity will only get up to 107-8v while others reported maybe 117v.
Click to expand...
With the NANO becoming so popular it should be offered in 220v?

This would increase sales!
as said:
You can keep it on any setting 24\7 but over 7 you get an increased chances of the wood cracking
Click to expand...
I leave mine between 3 & 4.
5 minutes before I VAKE I set it to 6.5 mostly (7.0 sometimes).
Right now it's on 3. (evening)
I set in on 4 during waking hours.
 
Last edited:
A

as

Well-Known Member
Mine is off at night and in the day its where I end up

I got a new cord on My nano and all works good now but when I was swaping them over I had to take out the lite as I cut the wire to short by accident but never really liked the light any way but may have to fill the hole up at some point just to make me fell better

I would also love to convert my nano or maybe even get a new one with a UK plug would be sick
 
pigfoot

pigfoot

Dabs are vapor too!
webMistress said:
The first use I vaped some high CBD Pre 98 Bubba Kush (15% CBD: 9% THC). This stuff never makes me feel high at all unless I smoke shit tons of it, it's pure pain/anxiety relief. I set the Nano on 7 after letting it heat up, took 2 puffs, waited a few mins to see the affects, & to my surprise I was higher than a kite! I've been vaping on 8 when I need to keep it to relief, but this is too high from this chart. I'm not combusting. I'm taking long, slow draws. Hell, on 7 I'm barely getting brown herb. I'm wondering if my Nano is too cool?
Click to expand...

I would go by the color of your ABV, rather than strictly following the chart. Perhaps this ^ session was at a low enough temp that you were mostly getting the low temp products, ie THC? Andy says the units vary, you will find "your" settings that work best.


webMistress said:
At least 2 mins all the way up then I turn it down & wait a few seconds before putting the stem on & hitting it.
Click to expand...

That might be your problem, it's not getting enough time to cool down to your desired setting.

Enchantre said:
While it does heat quickly, I find it works more reliably, as far as heat, if I let it warm up 5 mins at max, then dial it down to the desired spot for another 5 or so. Way more consistent.
Click to expand...

I think this is the way to go. I just turn mine to my setting for the session and let it warm for 10 minutes or so.

ataxian said:
I leave mine between 3 & 4.
5 minutes before I VAKE I set it to 6.5 mostly (7.0 sometimes).
Right now it's on 3. (evening)
I set in on 4 during waking hours.
Click to expand...

After the first sesh, this is what I do. Turn it down to 4, then back to my setting 5 min. or so before use.
 
Last edited:
Direcious

Direcious

Member
Well...Obviously PayPal screws up again, they've disabled all my payment methods!!

I guess I'm not getting a nano for another month or two...I'll be back.
 
Direcious,
  • Like
Reactions: ataxian
E

Eespiajer

Well-Known Member
how fine are your guys' grind. when i used a really find grind like mflb finishing grinder it goes through the screen lol and the screen sometimes gets clogged. should i just go with my small case and thats it?
 
Eespiajer,
Lahey

Lahey

Cruisin'
Hey yous guys. I must have been in the zone this morning, because after I got up, got medicated, hung out with my cat and enjoyed the sunrise... Apparently, I ordered an exotic Fiddleback Maple E-Nano! :D I can not always be held responsible for what happens with the flourish of creative energy that comes on with my morning vape session.

I have been thinking about getting one of the exotics for a while now, ever since falling in love with my 1st E-Nano (walnut), so it was only a matter of time. In case you are curious, I was only able to access the fiddleback maple option through the "related items" side-bar on the new web-site, after a bit of clicking between items. I couldn't find it any other way, so I think maybe they are still ironing out some quirks with the new website (?).

Anyway, I received both order AND shipping confirmation today, so I am super excited! When I ordered my first unit it took just over a week to get a shipping notice, and I was totally fine with that, since I appreciate what goes into a hand-crafted, functioning work of art such as the E-Nano. So I was very pleasantly surprised to see the quick turn-around this time. I must have just gotten lucky and caught Andy at a good time, and/or he is/was sitting on one or more fiddleback maple units ready to go. (No idea how many, ppl. Sorry ;)). Also for anyone who is curious, the new website does show my order status as having changed from "pending" to "shipped." I know some people noticed that the old website would stay stuck on "pending" indefinitely.

I had been planning on sending my walnut Nano in to Andy soon to get the new longer/beefier chord installed, and to have him sus out a quirk I have been having with somewhat un-even heat dispersion via the ceramic rod, and just generally give it a once-over. It works great though, and I knew I couldn't bare to be without it for a week or more, so here I am! I look forward to comparing the two units side by side, and it will be great to have an extra unit in case of emergencies, and for sharing, loaning out, etc. Happy vaping folks.
:leaf:
 
Mr. Gweilo 420

Mr. Gweilo 420

Dude
I have had my E-Nano since Monday evening. I will not deny that I was extremely pissed off about certain aspects of my transaction. However, there is no point harping on about that now. In fact I promised myself that I would not return to this thread. But I must say that the E-Nano is truly an exceptional product. I just have not been able to put it down. Its my first log so I expected something different but I wasn't sure what exactly. The vaporizer is stylish, beautiful, the size is amazing and the performance is just incredible. After getting mind-blowingly massive clouds with the Infinity and hookah setup I have pretty much cured myself of my cloud obsession. With the E-Nano it is the taste that I just can't get over. I don't really possess the words to describe it to be honest. Honestly I wanted to hate this vaporizer after my ordering experience but I am now trying to figure out how long I have to wait to get another one without my wife cutting my nuts off while I sleep.
 
Reflections

Reflections

Well-Known Member
I've had my Exotic Koa E-Nano for about a month now and i absolutely love love it :love:
So far I have been exlusively using my glass stems but unfortunutley I broke my 2 stems this week.
Luckily i bougt an adapter and have been using my mini bubbler and all i can say is WOW..She just keeps gettting better and better!! Thanks again Andy for such a great work of art! I havent wanted to use any of my other vapes...
 
D

Dafni

Well-Known Member
A friend of mine gave me a great idea: I'm about to gold plate the ceramic heater of my E-Nano! As well as the inside of the heater cover tube. So only gold and glass in the airpath!

I'm already vapin my concentrates off a pad of gold wool. Works perfect. Gotta love gold.
 
Seren

Seren

Away with the fairies
Liberty

Liberty

Well-Known Member
For those of you who have the Adjust-a-Bowl glass stem and GonG with the basket screens, how close do you let your material sit to the heating element?
 
Liberty,
Lahey

Lahey

Cruisin'
Liberty said:
For those of you who have the Adjust-a-Bowl glass stem and GonG with the basket screens, how close do you let your material sit to the heating element?
Click to expand...

I am still experimenting, but so far I prefer closer with a lower temp more than further a way with a higher temp for the same reasons mentioned above.
 
PPN

PPN

Volute of Vapor
Hi Ace of Vape, heavy stems could be ordered alone? cause I can't see them on your website....

And I'm patiently awaiting for Ed's TNT stems:brow:
 
PPN,
herbivore21

herbivore21

Well-Known Member
I find best results if I do 6.25 on the dial in an 18mm adjust-a-bowl with a quarter full full-sized bowl through my gspot steamroller pipe dry, repeat with about 1g of reasonably finely ground herb, then heat up the Nano to 7.33 or so and run the abv through said 18mm adjust-a-bowl on my bubbler once more, find this gets me two good hits per .05-.1 of a gram. The dry pipe tastes fantastic, the bubbler hit is cloudier and hits hard.

I separate kief vigorously and run that through at 8 now, QWISO on SS wool at 10. Also found that SS wool in a ball under the nano filter screen in the adjust-a-bowl filling the hole in the pinch and a lotus screen underneath the pinch on the other side of the bowl (gong side) stop anything from getting through into your bubbler, even melting qwiso!

I have almost weened myself off smoking joints for the second time since getting into vaping thanks to this approach. First relapse was after my PNP gave me issues and before I had my Nano/Lotus. Let's hope there are no more! :D
 
B

baltik

Well-Known Member
Ok I am having a moment of weakness, I see a walnut E-nano in mu future, I want to use it with my Pinnacle water tool - do I want the Adjustabowl or just the 14mm All galass Gong, All things being equal |I prefer all aglass...
 
Caligula

Caligula

Maximus
baltik said:
Ok I am having a moment of weakness, I see a walnut E-nano in mu future, I want to use it with my Pinnacle water tool - do I want the Adjustabowl or just the 14mm All galass Gong, All things being equal |I prefer all aglass...
Click to expand...

You want the 14mm adjustabowl
 
A

as

Well-Known Member
I like my all glass but it would be a pain for me to get more screens but the glass screen dose add a lil restriction bit only a lil bit
 
as,
You must log in or register to reply here.
Top Bottom