flotntoke
thoroughly vaped
@Mr. Gweilo 420 - you may want to keep this sort of thing in IM until you get a response - or if you don't for some time.
E-Nano from Epickai
ZX/mr-gweilo-420 your order shipped today. You should have gotten a confirmation from stamps.com. We're switching over to new shipping with the the new website and having some issues. If anybody is interested you can check out the new test site at www.shop.epicvape.com please remember it's a test site and you can't order off it. Email me any comments or suggestions about the site before we go live.
Thanks,
Andy
Thanks,
Andy
Last edited:
Mr. Gweilo 420
Dude
Why is that?
Edit: no I have not received tracking. I must say I am unimpressed with this service. I had also sent you specific enquiries which seem to be ignored.
Last edited:
flotntoke
thoroughly vaped
Manners.
Forum rules. "Please do not revisit an issue unless you have helpful information or constructive comments to add." at least.
Mr. Gweilo 420
Dude
My comment was made in response to @aceofvape.
Last edited:
flotntoke
thoroughly vaped
Oh, sorry! Thought it was a response to me since you quoted my post. Silly me.
Was that temper tantrum you dropped in my inbox for Andy, too? Let me know if you want me to forward it for you.
In the words of the Glimmer Twins, "Get off of my cloud." er, uh.... nano I mean.
Oh, sorry! Thought it was a response to me since you quoted my post. Silly me.
Was that temper tantrum you dropped in my inbox for Andy, too? Let me know if you want me to forward it for you.
In the words of the Glimmer Twins, "Get off of my cloud." er, uh.... nano I mean.
This sort of post is not appropriate. If you have a problem with another member who is breaking the rules, report it and do not respond; otherwise, please keep disagreements in PMs.
Reflections
Well-Known Member
New site looking good Andy 
PPN
Volute of Vapor
I have difficulties to find the perfect distance between flowers and the heater.... perhaps somebody could help me.
I tried my new stem (pinch with a screen) and adjustabowl:
- the pinch stem load size is really small in comparison with the all glass stem, this is help to get a uniform abv, perhaps a flat screen helps for bigger loads?
- I picked up 2 adjustabowls, one for flowers and one for concentrates, the ability to move the screen is perfect to found the perfect load sizing, the glass is thicker and the Gong is bigger, it seems very solid and durable and in comparison with the all glass gong this one helps to keep your bubbler clean of dust cause the SS screen had smaller holes(do you understand me....?)
Concentrates: I tried kief with an added flat screen on and under= amazing fuckin killer of brain cloud!
I tried reclaim with cotton= big clouds but I think that I taste the cotton (perhaps just afraid of it...)
I tried reclaim (big dab) with several SS screens= 2 or 3 clouds but lot off oil is everywhere on the wall of the GonG, not fully vaped at all.....
And I tried a tiny amount (micro dab) of my own kief oil (habitually it was shatter but this last run is a little bit runny...?)= nice clouds and less messy than with a bigger amount of oil.
The better pro for this vape is the ability to get short and intense session the perfect one hitter but sometime I found the need to load and reload many and many times a little bit pia (I know guys I'm never happy and nothing is perfect in the world
.......but I'm in love with it
!)
I tried my new stem (pinch with a screen) and adjustabowl:
- the pinch stem load size is really small in comparison with the all glass stem, this is help to get a uniform abv, perhaps a flat screen helps for bigger loads?
- I picked up 2 adjustabowls, one for flowers and one for concentrates, the ability to move the screen is perfect to found the perfect load sizing, the glass is thicker and the Gong is bigger, it seems very solid and durable and in comparison with the all glass gong this one helps to keep your bubbler clean of dust cause the SS screen had smaller holes(do you understand me....?)
Concentrates: I tried kief with an added flat screen on and under= amazing fuckin killer of brain cloud!
I tried reclaim with cotton= big clouds but I think that I taste the cotton (perhaps just afraid of it...)
I tried reclaim (big dab) with several SS screens= 2 or 3 clouds but lot off oil is everywhere on the wall of the GonG, not fully vaped at all.....
And I tried a tiny amount (micro dab) of my own kief oil (habitually it was shatter but this last run is a little bit runny...?)= nice clouds and less messy than with a bigger amount of oil.
The better pro for this vape is the ability to get short and intense session the perfect one hitter but sometime I found the need to load and reload many and many times a little bit pia (I know guys I'm never happy and nothing is perfect in the world
.......but I'm in love with it!)
Tweak
T\/\/34|<
I had the same problem. I ended up using another dome screen as a spacer between the heater port and the load.
Same here, if I try and load too much, draw is effected. So now I use the nano for small sessions, usually the first of the day, and when I want multiple large clouds I switch to my SSV, at minimum it still holds 2X what the nano holds. IMO, they make a great combo.
Vapodudule
Well-Known Member
i found also that my cotton was not appropriate for direct vaping. The better test was to load a fresh cotton on a stem and vape it. the result i expected was an absence of vapor, it was not. i felt too some trouble in lung from cotton, it took time to identify it.
I switched all cotton for SS mesh from volcano concentrate pad.
I use my nano bowls with a ball of SS mesh inside the joint and an EQ screen. i am still harvesting stem hash from all glass one. I loved vaping heavy resin soaked cotton. Now it is from SS mesh and it is better for sure.
I switched all cotton for SS mesh from volcano concentrate pad.
I use my nano bowls with a ball of SS mesh inside the joint and an EQ screen. i am still harvesting stem hash from all glass one. I loved vaping heavy resin soaked cotton. Now it is from SS mesh and it is better for sure.
Vapodudule
Well-Known Member
Why titanium? SS is enough toi me
ataxian
PALE BLUE DOT
The new K.I.S.S. carts have T2 thats why they burn cleaner.
I use my W9 TECH for concentrates and the NANO for FLOWERS.
Sometimes I just use a small piece of organic cotton wrapped around a small chunk of shatter and vaporize it with my NANO. I know some don't like it? Taste very good I think. The T2 wool might be the best solution for concentrates.
Has anyone done HASH with the NANO?
Mrmrmrmr
Well-Known Member
I too love to vape vapor resin from cotton. I have a piece that's been sitting in my cloud buddy and I ripped a small section off and vaped it at 6.5.
Thick clouds of medicating bliss. Perfect for right before sleeping.
ataxian
PALE BLUE DOT
Mr. Gweilo 420
Dude
@aceofvape. - yesterday you promised me a tracking number. Today I do not have a tracking number. This is fast becoming an extremely poor experience.
Osn Dosn
Well-Known Member
Your experience seems to get poor extremely fast.
--
I had this klingklong sound when knocking on my nano and so I had a reason to look under its skirt.
Not that I have any clue, but what I found was somewhat confusing..
where are the electronic components that might get damaged by too much V people were talking about a few pages ago. I see only the dimmer cables connected to the ceramic heater.
what does this screw do, that dismantling has no effect
why is nothing really holding the heater in its position
this way its position might vary by quite some mm
and after removing the screen from the steel tube: why is there another random piece of screen falling out, whats the snap ring doing and do I need to get those things in a specific position or just randomly put them back in?
where's this Putain game going?
No I have a lot of things to think about while not falling asleep, great
--
I had this klingklong sound when knocking on my nano and so I had a reason to look under its skirt.
Not that I have any clue, but what I found was somewhat confusing..
where are the electronic components that might get damaged by too much V people were talking about a few pages ago. I see only the dimmer cables connected to the ceramic heater.
what does this screw do, that dismantling has no effect
why is nothing really holding the heater in its position
this way its position might vary by quite some mm
and after removing the screen from the steel tube: why is there another random piece of screen falling out, whats the snap ring doing and do I need to get those things in a specific position or just randomly put them back in?
where's this Putain game going?
No I have a lot of things to think about while not falling asleep, great
Reflections
Well-Known Member
Tore off a few pieces of bud and filled all glass stem half way and tamped down a tad....
Put stem on my beautiful exotic nano...Waited a nano second..lol first hit was delicious....
Mr. Gweilo 420
Dude
So is one week with no tracking information a good experience osn?
There are two screws at the bottom of the unit on either side of the epicvape logo, underneath the cork sticky feet. Unscrew these with a Phillips head and the bottom cover will come of the main unit. From there, you will quickly see that the wires for the light bulb, the heater and the power cable are all terminated with small transparent nylon and metal crimp terminals.
Ok, so I unscrewed those 2 screws and am trying to get the bottom off. No luck, can't get it to move at all. Is it just tightly wedged in there?