Caligula

Maximus
No pics:horse:

No matter I have one nano dab
6F8B656B-0482-4473-A6CD-C9FA4ADA2CBF_zpsjlxz7auu.jpg
6F8B656B-0482-4473-A6CD-C9FA4ADA2CBF_zpsjlxz7auu.jpg

http://i122.photobucket.com/albums/o250/Mrthc3/Mobile Uploads/6F8B656B-0482-4473-A6CD-C9FA4ADA2CBF_zpsjlxz7auu.jpg

This is my fave bubbler to use with the nano just a strait down stem and small bubbler could do with a lil longer down stem so I could use less water

Let me halp.

6F8B656B-0482-4473-A6CD-C9FA4ADA2CBF_zpsjlxz7auu.jpg
 

canj00digit?

All my days in a daze...
Me and my 'Durp Durp Purp' E-Nano have been hanging out a lot, fucking around, talking shit about other vapes, but mostly working on getting our tek down for the higher dose, higher temp type of hits we like to take/provide. I've had to softly break it to her that, so far in my experiences, I have to give the edge to the Cloud as a flower vape in terms of pure ability to deliver giant clouds. I previously estimated that the E-Nano was within 90% in terms of hit size, I am going to revise that down for now to 85ish%.
Poor little Durp Durp Purp was very upset but I explained that she had the Cloud beat in every other area and destroys it in two VERY key (for me) areas: 1) ease of use/handling 2)concentrate ability. I explained that this put her over the top for overall better vape. She seemed to relax a bit, so I rubbed her belly.

I'm still working on my tek. :)

This video was done with the E-Nano on 8.5, the basket screen as low in gong as it goes, .13g flower load and a finer mesh top 'diffuser' screen made from an ELB cap. The diffuser screen concept was talked about a few pages ago in this thread. From my albiet limited experiences so far it does make a difference to how even extraction is. I am also using a little bit of slicone off the gong to extend over the E-nano's heater forming more of an airtight connection like I used to see BDV doing with his HI.

The piece is an American Glass (AG) 60mm gridded upline from BWG. It's a SOV clone, American blown German Schott glass. This piece was $90 when I bought, was such a bargain.

 
Last edited:

canj00digit?

All my days in a daze...
my 1st vid i think sorry for bad quality but its on my laptop webcam i just wanted to post a vid a join in the fun
this was on 8
http://s1173.photobucket.com/user/mrthc2/media/Mobile Uploads/Capture_20140310_zps2d8a7c65.mp4.html

Hells yeah, jump right on in :D the more the merrier!
I don't care if you flip book illustrated your hit I'd still want to see it. :p

Good job on breaking your video cherry. *sniff* I remember mine... it wasn't really that long ago and already I am a dirty video whore!
 

herbivore21

Well-Known Member
blargh, just got woken up by a noisey fucker using a loud drill to put together my next door neighbour's bed. But the milk vids that I have just woken up to put a smile on my face! Canj00digit? That glass in your vid looks to really pull some clouds through nicely! This is what I like to see! :D
 

as

Well-Known Member
@ACE OF VAPE I know you said that the nano should be left below 7 when on standby as I call it but what are the dangers of leaving the nano on 8-8.5 24/7 as some need to medicate now not in a minute or 2 I would like to leave my nano on 8 it would be of at night but on from early morning till late at night every day how much ofa problem would this be
 

SlinginPaint

As Above ∞ So Below
@ACE OF VAPE I know you said that the nano should be left below 7 when on standby as I call it but what are the dangers of leaving the nano on 8-8.5 24/7 as some need to medicate now not in a minute or 2 I would like to leave my nano on 8 it would be of at night but on from early morning till late at night every day how much ofa problem would this be

The wood might dry out too much and crack..
 

Lahey

Cruisin'
But what sort of time frame?

It would be pretty difficult to predict, and would likely be different for each type of wood and each unique cut. Also dependent on your local climate (it is very dry where I live.) I think canj00digit's purple heart unit cracked a bit more easily because of the properties of that wood. I have left my walnut unit at 7.25 for what seemed like a few hours before and it was fine. I'm not sure if I would want to push it much further than that if I can help it, although it would probably be fine. Just playing it safe since I don't know for sure. I'm wondering if there is something I can treat the wood with, like wax or oil of some kind, that would help to prevent it from drying out too much.
 

ACE OF VAPE

Vape outside the box
Manufacturer
@ACE OF VAPE I know you said that the nano should be left below 7 when on standby as I call it but what are the dangers of leaving the nano on 8-8.5 24/7 as some need to medicate now not in a minute or 2 I would like to leave my nano on 8 it would be of at night but on from early morning till late at night every day how much ofa problem would this be
It's not a problem. I leave mine on all the time. It's just not recommended. maybe use a cheap plug in timer? Also to get from a standby '7' to '8.5 'shouldn't take longer than 10-20 secs.
 

Caligula

Maximus
I think @CitizenVape asked for a demo video showing everything from loading the gong on through to the end. Sorry I didnt have anything on hand, but I made this for you. I figured I post it in this thread as well for obvious reasons.

Oh, and if there's no music when you view it, there will be. YouTube just sucks a fat one for adding that to the encoding after the fact. Took HOURS to finish yesterday.


...and as always, it was shot in 1080P for your viewing pleasure!

 

Tweak

T\/\/34|<
Just got some pinch style stems in the mail. They are awesome. Thanks Andy.

IMO, much better airflow than my all glass stem. They are a bit wider and longer than my GonGs too, so it looks like I have a bit more wiggle room for my screens, :tup:. Didn't think I would be this excited over stems, was looking more forward to the adjustable GonG.

Wonder if it possible to make a "fatty" wand where the chamber gets bigger right before the screen pinch? Party wand, :party:.
 

Lahey

Cruisin'
I was looking at the epicvape website, as I sometimes do, and next thing I know I am clicking "pay now." Pulled the trigger on one of the adjust-a-bowl GonGs. Very reasonably priced, and with the FCLOVE discount + free shipping, it felt like a steal. My all glass stem and all glass GonG that I got with the Nano are still going strong. I just don't really need the glass honeycomb now that I have gotten used to using the basket screens -- I've even gotten pretty good at making my own. I suspect that I will like the reduced draw restriction and ease of cleaning. I love how minimalist the Nano is. :cheers:
 

rabblerouser

Combustion Fucker
I've had my e-nano for just over 11 months now, and like it as much or more than ever. I'm catching up on the thread atm. I think the flavor may be better at lower temps than the ones that generate the biggest clouds. Also I mainly hit it dry, since i think the flavor is better. Similar tradeoff to the temperature, bigger hits with the water filtration; but less flavor, again.
 

Lahey

Cruisin'

as

Well-Known Member
It's not a problem. I leave mine on all the time. It's just not recommended. maybe use a cheap plug in timer? Also to get from a standby '7' to '8.5 'shouldn't take longer than 10-20 secs.

Thank you for the reply I think I read this then forgot?maybe I fell a sleep?

A timer would not work as I vape as and when needed not every so often

I find it needs min or 2 to really get warm and to start producing like it would if it had bin on 8 for a while
 

hitnrun

Well-Known Member
A timer would not work as I vape as and when needed not every so often

I could be wrong, @as, but I think Andy was suggesting the timer...so you wouldn't forget to turn it off at bedtime, and leave it on. That's how I might use one, if I were worried. I've had mine (walnut) about as long as @rabblerouser, and have left it on somewhere between 6.25 and 7.75, 24/7, for literally weeks at a time with no ill effects. Have stash = ON.
 

as

Well-Known Member
I'm normally good and tern it off/down at night but that may still be a good idea

I also have a walnut
 
as,

canj00digit?

All my days in a daze...
Meh, quick tek update, I've bailed on using the pre-screen and the silicone seal over the heater.
For a lazy bastard like me, the improvement is not enough as to justify the fiddly effort of the two extra steps.
One of the reasons I went E-Nano was to simplify the routine a bit.:rolleyes::tup:

Me and Durp Durp Purp are still learning each other. I'm trying to coax it to whitewall my largest tube but I think that might be just out of DDP's impressive reach (with flowers at least). But damn is it fun trying! :party:

Ahem, with the invaluable assistance of a love poem generator, I composed the following:

My Love, Durp Durp Purp
Your skin glows like the honey oil, blossoms intense as the green in the purest hope of spring.
My yearning heart rises to your pipe organ voice and leaps like a BEAST at the whisper of your name, Durp Durp Purp.
The evening ascends in on a great emu wing.
I am calmed by your loincloth that I carry into the twilight of cloudsbeams and hold next to my lungs.
I am filled with hope that I may dry your tears of bho.
As my blood shot eyes falls from my silicone gong sleeve, it reminds me of your ABV.
In the hushed, I listen for the last brain explosion of the spring.
My heated clearing grip leaps to my errrl sack. I wait in the crystal moonlight for your secret GonG so that we may vaping as one, clearing grip to clearing grip, in search of the glorious Purple Heart and spiritual Oz of love.
 
Top Bottom