Dynavap VapCap

[TiSteamo]

I really can't find any faults with this little steel friend, I've had it for five years, I ordered it sitting on the stairs of an old villa in the Italian countryside and I didn't know yet that it, the vapcap, would change my life.
From that moment I spent hundreds of happy days together, traveling across lands and seas always with its little green treasure to release into the air. I really can't find any faults with it: it's eternal. It couldn't break even if you threw it from Mars! It could be eaten by a Tyrannosaurus maybe, and if it had been invented in prehistory, but it would have been shit and the doctor would have rummaged through its big shit and found it. Of course, using it afterwards would have been hard for everyone. I admit it. But maybe who knows, after a good wash...
Here, another excellent reason to make the little vapcap a best friend is that in addition to coloring every day with nursery rhymes you can use it for example to warm up. When the temperature of the hood drops a bit, in the long winter nights, we young people without heating in the mountain huts, can also use it for that, to warm up.
You also owe this monologue to him, it's all his merit and proof of his effectiveness.
and no, I didn't put mushrooms in the bowl!

 

[Cannabiker]

So, this product designed to add smoky flavor to bourbon is being sold as a gravity bong. I've watched a demo video for the GravInfuse, and it looks like a fun party favor (if I were a drinker). But rebranded as a GraviToke it doesn't seem to make much sense. Can anyone explain how to access the "toke" mode of this device?

GraviToke

The GraviToke Gravity Bong is used to elevate your vaping experience and beyond with a groundbreaking design made to transform your smoke session.

www.dynavap.com

 

[SmokeyDope]

So, this product designed to add smoky flavor to bourbon is being sold as a gravity bong. I've watched a demo video for the GravInfuse, and it looks like a fun party favor (if I were a drinker). But rebranded as a GraviToke it doesn't seem to make much sense. Can anyone explain how to access the "toke" mode of this device?

GraviToke

The GraviToke Gravity Bong is used to elevate your vaping experience and beyond with a groundbreaking design made to transform your smoke session.

www.dynavap.com

I have no clue how you are supposed to use this from the pictures. Not one picture showing anyone using it as a GB in real time or linked videos.

The description was confusing too like if its a gb why are you talking about infusing spirits. So yeah I agree its a wierd rebrand of a product not specifically meant to be a gb. It seems kind of gimmicky and overly complicated with way too many plastic and silicone parts that will inevitably wear out.

I would rather spend the money on a classic glass bottle in bottle GB with a standard 14mm insert. If Dyna had released a mini glass GB with a custom metal greeb to insert 8mm dynavaps at a 40-60$ price point it would be a no brainer.

I loved using my Dyna in a homemade GB before the glass adapter had a fall. What they put out is disappointing on initial impression. Maybe the people who decide to pick one up and try will report its a good time tho.

 

[badbee]

So, this product designed to add smoky flavor to bourbon is being sold as a gravity bong. I've watched a demo video for the GravInfuse, and it looks like a fun party favor (if I were a drinker). But rebranded as a GraviToke it doesn't seem to make much sense. Can anyone explain how to access the "toke" mode of this device?

GraviToke

The GraviToke Gravity Bong is used to elevate your vaping experience and beyond with a groundbreaking design made to transform your smoke session.

www.dynavap.com

This video shows it fairly clearly:

. Just imagine at the part where it is spitting smoke into the glass you instead have that tube in your mouth. My guess is that it would work really poorly for vaping.

 

[budski]

my dynaverse is shrinking sold off 5 already, so I grabbed a group shot for posterity before any more find new homes.

some of these pieces are swingers, swapping tips and mouthpieces all the time.

 

[Spy Car]

Talk to me.

I just (for the fuck of it) tried using my Hyperdyn (torch) without the condenser in place.

I think I prefer it. On first go anyway. Very open and I like feathering the carb...er...uh..."airport." LOL

Any reason this is a "bad idea?"

I'm guessing I'm not the first who has tried this? Thoughts?

Bill

 

[coolbreeze]

Talk to me.

I just (for the fuck of it) tried using my Hyperdyn (torch) without the condenser in place.

I think I prefer it. On first go anyway. Very open and I like feathering the carb...er...uh..."airport." LOL

Any reason this is a "bad idea?"

Just for the heat, but if you can handle it, no problem.

I'm guessing I'm not the first who has tried this? Thoughts?

It's a great idea if you're using it in a bong, there'll be less resistance, etc.

Bill

 

[budski]

I take the condenser out of hyper & vongs and use just a mouthpiece and cooling spiral.

 

[Spy Car]

Just for the heat, but if you can handle it, no problem.

It's a great idea if you're using it in a bong, there'll be less resistance, etc.

I reloaded a fairly-full load onto this Hyperdyn (w/o condenser) and went for another whirl.

Not "hot" (although I keep my vapes on the cool side).

I will repeat the experiment at another time. But pretty positive for me. I guess I like open/controllable.

I take the condenser out of hyper & vongs and use just a mouthpiece and cooling spiral.

Was this an "innovation" on your part, or is this a common-place practice?

I find that I often "co-invent" things that have been around forever. LOL

Bill

 

[budski]

Was this an "innovation" on your part, or is this a common-place practice?

I find that I often "co-invent" things that have been around forever. LOL

Bill

yep I've done a lot of experimenting w/ every stem and tip, really love the TRWW short condenser mouthpiece with spiral for bigger airflow.

 

[Spy Car]

yep I've done a lot of experimenting w/ every stem and tip, really love the TRWW short condenser mouthpiece with spiral for bigger airflow.

The thing you refer to, I have no idea what it is. TRWW?

Bill

 

[TigoleBitties]

The thing you refer to, I have no idea what it is. TRWW?

Bill

https://theroguewaxworks.com/

 

[budski]

NCMP01 Dynavap Vapcap MP with Short Condenser

Nectar Collector Tip turned Dynavap Vapcap Mouthpiece GR 2 MP with short condenser. This setup will work with any standard 8mm Vapcap stem. The MP comes with one 304 Stainless Steel Cooling Unit and necessary O & X Rings It also works as a WPA with a 10mm female joint

theroguewaxworks.com

 

[coolbreeze]

Looks like 21 Omnis will be in stock for the holidays.

 

[budski]

the rosiuM bundle isn't bad if your gonna use the stash tray.

 

[jeffp]

anyone know or can recommend a vendor on DHGate that sells 10mm jhooks for Dynavap? Thanks.

 

[Kozzmozz]

You could get a regular jhook and a fat mouthpiece

 

[jeffp]

You could get a regular jhook and a fat mouthpiece

Smoke6 has them, shipping a little high but prices are low. Thanks.

 

[Hagbard]

setup ready for today

 

[TigoleBitties]

setup ready for today

Beautiful setup. Is that a Stona grinder?

 

[Hagbard]

Beautiful setup. Is that a Stona grinder?

no. its the Ryot GR8TR.. i have a stona as well and got this one because it is so similar and i love my stona

 

[364F]

This video shows it fairly clearly:

. Just imagine at the part where it is spitting smoke into the glass you instead have that tube in your mouth. My guess is that it would work really poorly for vaping

Isn’t that just a manual Studenglass?

 

[badbee]

Isn’t that just a manual Studenglass?

It's very similar, but that's just the physics of using water and gravity to create suction. My guess is that, like the Studenglass, it doesn't work well for vaping.