Dynavap VapCap

Duba

Duba

Well-Known Member
Accessory Maker
Like the handling of the cap with the FMJ being more difficult and risky, I conceived this small leather "safety ring" which makes it possible to remove and put back the hot cap quickly and without worries.
Just put the ring around the cap (+FMJ) and press lightly at the base to tighten and manipulate it.
Here on FC, i'll offer one to those who will buy a sleeve (adapted to the FMJ too) for their Dyna, size M, Omni/xl or bigger.
https://imgur.com/a/n2AWTwz
 
StringTheorista

StringTheorista

Well-Known Member
Been doing that for a while even to lift my regular caps. It’s a great simple solution
E9122-F6-D-844-B-4799-8077-1-D5348-F6-AB6-E.jpg
PS: love your work, Duba
 
vaporculture

vaporculture

Well-Known Member
StringTheorista said:
Been doing that for a while even to lift my regular caps. It’s a great simple solution
PS: love your work, Duba
Click to expand...
Agreed -- Duba is putting out some really fine work.

Here is the pouch I keep my Omni and Aomai in. Works great to pull a hot cap when I'm on the go. The leather handles the heat quite well.

https://imgur.com/olRXbfA
 
beyond6strings

beyond6strings

Just another traveller in the Cannaverse
Vehmic said:
Does anybody have an alternate screen they prefer in their Dynvaps? Preferably with better longevity than the stock.
Click to expand...
I like the mesh screens from DDave Mods. Better airflow and easier to clean. Which overall improves flavor as well. For me.

Hats off to Austyn. The Simrell FMJ is the bomb. I put it on an MVS and used it through my newest water piece, the Chill and I was blown away. I used a Blazer PT4000 for all but one heating cycle. And I experimented with the Firefox once. Just spent the past hour ‘practicing’, and only had one near combustion event. The first click is dampened by the FMJ, so I was a bit slow to respond. Once. Two more practice tries and I’ve got it down. I like the PT4000, it’s easier to get the right flame size, but I’m not a huge fan of the form factor.

Suggestions?

I have two other stems that I use so I’ll pick up two more FMJ’s and Captive Caps in some future order. But Austyn continues to find ways to keep me returning to the vapcap. Kudos.
 
Vape_Or_Die420

Vape_Or_Die420

Well-Known Member
Is it all in my head or am I tasting a metallic taste on the first hit or two off a new FMJ? I have 2 of them and I swear my mouth tasted like a penny the first time I used them. After a couple uses I don't notice it at all.

Very impressed by mine btw.
 
Vape_Or_Die420,
  • Like
Reactions: endof3d
F

feralcomprehension

Qualified Observer
Vape_Or_Die420 said:
Is it all in my head or am I tasting a metallic taste on the first hit or two off a new FMJ? I have 2 of them and I swear my mouth tasted like a penny the first time I used them. After a couple uses I don't notice it at all.

Very impressed by mine btw.
Click to expand...
Maybe from handling everything? Seems unlikely to enter the vapor stream off the cap...
 
TheThriftDrifter

TheThriftDrifter

Land of the long vapor cloud
Vape_Or_Die420 said:
Is it all in my head or am I tasting a metallic taste on the first hit or two off a new FMJ? I have 2 of them and I swear my mouth tasted like a penny the first time I used them. After a couple uses I don't notice it at all.

Very impressed by mine btw.
Click to expand...

Its not all in your head, I get some metallic taste as well.
It completely put me off using it for a couple of days.
But I tried it out again and the taste seemed to have faded somewhat.

The joys of being a super taster. :spliff:
 
Alligator427

Alligator427

Well-Known Member
Just received the FMJ. Work very well with the revolve, vong Tip and RONXS torch : big and tasty clouds. I fire first in the midle that give me a big first hit and second smaller. I fire a second time but near the top (otherwise combustion) and I can have also a nice hit. Color of AVB is more homogeneous (yellow-amber like I love). The stem is very hot at the end of the session even at the level of the airflow hole.
I taste it also with a glass tip-stem. It work but it is not the best way.
 
Last edited:
bulllee

bulllee

Agent Provocateur
Vape_Or_Die420 said:
Is it all in my head or am I tasting a metallic taste on the first hit or two off a new FMJ? I have 2 of them and I swear my mouth tasted like a penny the first time I used them. After a couple uses I don't notice it at all.

Very impressed by mine btw.
Click to expand...
:lol::lol::lol:
What happens if you breathe copper fumes?


Inhalation of copper oxide fumes may cause irritation of the upper respiratory tract and may result in a form of metal fume fever, characterized by flu-like symptoms such as chills, fever, nausea, and vomiting.Jun 4, 2018

COPPER METAL SAFETY DATA SHEET​

 
S

Steamer

Well-Known Member
beyond6strings said:
I like the mesh screens from DDave Mods. Better airflow and easier to clean. Which overall improves flavor as well. For me.
Click to expand...
I wanted those for a while now, they should open up the airflow on my 19M just a little bit more. Unfortunately it's hard to track them down here in the EU...
Do you know the exact diameter and the mesh size? Or an idea on where to find them in the EU?
 
Steamer,
beyond6strings

beyond6strings

Just another traveller in the Cannaverse
Steamer said:
I wanted those for a while now, they should open up the airflow on my 19M just a little bit more. Unfortunately it's hard to track them down here in the EU...
Do you know the exact diameter and the mesh size? Or an idea on where to find them in the EU?
Click to expand...
Sorry I don't.
 
beyond6strings,
Smokey McVape

Smokey McVape

Well-Known Member
Steamer said:
I wanted those for a while now, they should open up the airflow on my 19M just a little bit more. Unfortunately it's hard to track them down here in the EU...
Do you know the exact diameter and the mesh size? Or an idea on where to find them in the EU?
Click to expand...
Hard to find them within the EU. I got mine here from a guy in the US.
www.ebay.co.uk

(3/8") 100+ Count Stainless Steel Pipe Screens 0.375" (9.525 mm) Made in USA! | eBay

Temperature of the combustion zone in a tobacco pipe is on average around 932 degrees Fahrenheit (variability, 716°–1148° F.). 100+ Count Stainless Steel Pipe Screens 0.375" (3/8") (9.525 mm) Made in USA!
www.ebay.co.uk
 
Smokey McVape,
  • Like
Reactions: Steamer
TheThriftDrifter

TheThriftDrifter

Land of the long vapor cloud
bulllee said:
:lol::lol::lol:
What happens if you breathe copper fumes?


Inhalation of copper oxide fumes may cause irritation of the upper respiratory tract and may result in a form of metal fume fever, characterized by flu-like symptoms such as chills, fever, nausea, and vomiting.Jun 4, 2018

COPPER METAL SFETY DATA SHEET​

Click to expand...

Thanks for posting this info, much appreciated.
I tend to be overly cautious, my immune system likes to go haywire over the seemingly smallest things.
 
chlorophyll_man

chlorophyll_man

AVB Inspector
Hiya, I want to take a Dynavap with FMJ to Portugal this summer.
Does anyone have any knowledge of what butane gas refill brands are available in shops there please? I'm looking for the equivalent of the "Near Zero Impurities" brands we have in the UK to keep my torch lighters from failing.
Failing that, has anyone had much success using a Bic lighter with an FMJ as an alternative heating method? There is a gas ring there but I'm looking for a solution that can be used in places other than just the kitchen. Thanks
 
StringTheorista

StringTheorista

Well-Known Member
You might consider a candle as a Bic alternative. I think a bic would get uncomfortably hot in the loooong time it would need to be lit to heat the fmj. Candle in a tin with a lid, maybe?

Or an alcohol lamp. Check out George’s video on YouTube about heating with alcohol,lamp. Very clean, alcohol should be available where you’re going.
 
Squidge

Squidge

Butane powered
Mushroomturtle said:
Hiya, I want to take a Dynavap with FMJ to Portugal this summer.
Does anyone have any knowledge of what butane gas refill brands are available in shops there please? I'm looking for the equivalent of the "Near Zero Impurities" brands we have in the UK to keep my torch lighters from failing.
Failing that, has anyone had much success using a Bic lighter with an FMJ as an alternative heating method? There is a gas ring there but I'm looking for a solution that can be used in places other than just the kitchen. Thanks
Click to expand...
Found a tobacconist online based in Lisbon who sold Newport Gas so I don't think you'll have that many problems getting what you need
 
You must log in or register to reply here.
Top Bottom