RustyOldNail

SEARCH for the treasure...
it's 14 and 10mm.
ed's wpa says it only fits titanium tips and not ss (which i don't understand) and i already have m's and stuff. just looking for either a wood or glass stem for my MJ arsenal. it's looking like i might be stuck getting another bb6 or a bb3...

Same here, ended up with a BB3 for my 10mm rigs. The STUPID BALLS that never move after the first dose of vapor resin, and in my larger BB9’s (RETIRED), those balls on top and bottom are physically STUCK. Then I add a silicone hose sleeve to kill the open airport. While I’ve posted my distain for these overpriced non functional ball BB’s many times before... I ended up buying the BB3, as there is not much love for 10mm fans.. and DV had the 420 sale, so it came with a colored titanium tip. At least with the tiny BB3 there are LESS STUPID BALLS! 🏀
 

Vaporware

Well-Known Member
it's 14 and 10mm.
ed's wpa says it only fits titanium tips and not ss (which i don't understand) and i already have m's and stuff. just looking for either a wood or glass stem for my MJ arsenal. it's looking like i might be stuck getting another bb6 or a bb3...

If you want to stick with SS tips I’d ask @Ed's TnT if he has time to make you a WPA that fits the tips you have. Otherwise it might have to be a BB since I think all of the other glass WPAs I’ve seen have just been 14mm.

Edit: I just looked up the piece you’re talking about and I see he wouldn’t be able to make a custom version for you, unless he’s up for making you a wooden WPA with a 10mm connector? :)

Thanks for reminding me about the graduated connector on the BBs. The new Vong works with 14 and 10mm too, and I’ve actually made use of both so I’m happy with the feature on that one. :)
 
Last edited:

RustyOldNail

SEARCH for the treasure...
Same here, ended up with a BB3 for my 10mm rigs. The STUPID BALLS that never move after the first dose of vapor resin, and in my larger BB9’s (RETIRED), those balls on top and bottom are physically STUCK. Then I add a silicone hose sleeve to kill the open airport. While I’ve posted my distain for these overpriced non functional ball BB’s many times before... I ended up buying the BB3, as there is not much love for 10mm fans.. and DV had the 420 sale, so it came with a colored titanium tip. At least with the tiny BB3 there are LESS STUPID BALLS! 🏀

Thought I’d add a visual. BB3 on Grav “Hour Glass” micro rig:

04586C2E-2BDB-4740-9255-25A1AFC9DA05.jpeg
 

iBloke

Member
$10 to ship something so small seems like a lot, doesn't it? I mean you could put it in an envelope and send it for under a buck.

$1.20 is the correct amount heading north at least.
I agree. I just went through the order process and checkout told me shipping to Victoria Australia for this teensy tiny thing will be $19 which brings the total cost to $52 :mental:… so in light of this ridiculous cost I emptied my cart and closed the page.
 

cybrguy

Putin is a War Criminal
It hurt a little bit, but I went for it anyway. I thought about waiting till George is selling them, but it would be $7 from DynaVap anyway and I do want to try it out. And the special (2nd unit) may no longer apply.
 
cybrguy,
  • Like
Reactions: Ramahs

Bologna

(zombie) Woof.
In fairness, pre-sales get 2 for that price. Which I just did.
Oh, I saw that you get 2 $.10 tiny metal rings for $36... I actually cut and pasted it from the SP website! If there were any "fairness" at all, it would be the inclusion of Ti CCDs... :rolleyes:

Like so many before I’ve struggled to set the CCD in half position and gave up. Now I don’t have to and can enjoy the device the way I like.
I'm glad you found a solution that works for you (and DVs inherent design flaw :razz:), truly! 😇

I’ve tried putting less in but it’s not the same as when it’s more tightly packed.
Try tamping gently with a 6p 'box' nail head, like I do.... works a treat for a nice even tamp. :science:

Consider this accessory the way many of us do with other choices: get it if you want or wait for something else that strikes your fancy.
I've never had a problem rationalizing the things I want in life... :tup: but thanks for the advice...! :peace:
 

stark1

Lonesome Planet
:spliff:Different solutions, converging to a similar result, boys.

For a 1/2 full bowl (or half empty), my take is to use
A small (1/4”) wood dowel, tamp gently, take a toke,
or two.
—& back to dreamland. YMMV

No Ti was shaved in the process, and the presence is now. :tup:
Life is full of solutions.
 
Last edited:

sirwalter

Well-Known Member
I think DV would do well to offer a half-depth tip. Mine is working wonders for true one-draw extraction for a fine-grind bowl using real-time heating with the HotShot.
I've always hoped they would do that. Either that or someone like Ddave's Mods could offer tips that have been cut. I know I'd buy a couple of titanium ones.
 
sirwalter,
  • Like
Reactions: cx714

cx714

Unregulated Tendencies
I’ve always had solid results with just packing the load I want and giving it a light tamp to hold it until a heated draw tightens it up.

That said, I feel like a spacer is a solution that just about Dremels itself, esp. a length that fits just under an adjustment notch.
 
cx714,

Bologna

(zombie) Woof.
I've always hoped they would do that. Either that or someone like Ddave's Mods could offer tips that have been cut. I know I'd buy a couple of titanium ones.
Yup, and that's what it will take ftmp if history holds true... how long did it take to start offering condenser-less glass bodies with a gong attachment (@DDave), or IHs (and not even theirs) etc...? And again, with portable temp sensing IHs on the horizon, thus making the legendary, copyrighted "caps" existence finite (to a degree), unless you're producing pure art, or other less technical wares, I'm afraid willing Luddites and personal philosophies aren't long this world. People in the Dynaverse want options and will go elsewhere if necessary.

At this point, the Dynaverse will evolve with or without DynaVap.
 
Last edited:

Mowgli2

Well-Known Member
Some 14 male to 14 male adapters work as a wpa for dynavap tips.
You fit the tip inside of the joint on one end and the other plugs into the piece.
So if you have a 14 male to 10 male that might work the same way.

It all depends on the inside diameter of the joint on the adapter. The one I’m using fits better in one end than the other, and I’m sure there are some adapters that wouldn’t fit at all.
I have also used a “popper” bowl piece as a wpa . That was very inexpensive compared to some other popular dyna to bong adapters, but it didn’t last long before it broke.

Also neither of these two options have an airport.....is that a deal breaker?

Obviously being able to test the fit of the tip to the adapters inside of a brick and mortar shop would be ideal. That is what I did and it took a few tries to find one I liked. I realize that might not be easy or even possible depending on where you are located.
 

Bologna

(zombie) Woof.
it’s almost as if I were talking directly to you and not just sharing my thoughts on a forum.
Actually, I'll edit my initial reply and I guess I'll just have to assume you were replying directly to me again here and respond as such...: Sorry man, I won't respond to any of your replies to me directly again. :peace:
 
Last edited:
Bologna,
  • Like
Reactions: stark1

Morty

Well-Known Member
I had completely forgotten how well the dynavap works natively without touching the air port at all. I've just come off a three month break, so I now have baby lungs that can't really handle the big hits at the moment, so last night I thought I might try not closing the air port and hauling on it as hard as possible like I usually would. Still got good clouds and a two cycle extraction with my Ti woody without giving myself a coughing fit! Very nice.
+1,000!!!

I started doing this a little while back when I saw someone on the Dyna Reddit chucking out huge clouds using the 20M w/ the airport open and people here like mccringleberry singing it's praises.

I always use a the half bowl setting in my 20M (and Ti tip), and I normally use my M natively w/ the airport open & feather it towards the end of the hit. Just tried this with my 14mm j-hook and 14/10mm reducer w/ the M (leaving the airport open the entire hit)...what in the fuck!!! Some of the biggest, most ginormous clouds I've pulled from any VC I've owned.

It's funny, b/c I'm looking down at the j-hook the whole hit, and it's wispy as fuck! And I'm not feeling much in the way of vapor shootin' down my gullet (smoooooth!!), then BAM!!! upon exhale. I've been looking for a small water piece for my Dyna's the last couple weeks. Not no more! This is the way for me.
 

stonedmallone

Well-Known Member
My 2020m is still lost somewhere in my house. I have been searching for 6 months now, top to bottom, cannot find it. You would think after buying several more Dynavaps I'd lose the itch, but nope, still want to find it. Mark my words fam, I will return one day with a success story on finding it. It might be several years from now, but I will tag this post and share my victory. It will be a glorious day.
 

invertedisdead

PHASE3
Manufacturer
+1,000!!!

I started doing this a little while back when I saw someone on the Dyna Reddit chucking out huge clouds using the 20M w/ the airport open and people here like mccringleberry singing it's praises.

I always use a the half bowl setting in my 20M (and Ti tip), and I normally use my M natively w/ the airport open & feather it towards the end of the hit. Just tried this with my 14mm j-hook and 14/10mm reducer w/ the M (leaving the airport open the entire hit)...what in the fuck!!! Some of the biggest, most ginormous clouds I've pulled from any VC I've owned.

It's funny, b/c I'm looking down at the j-hook the whole hit, and it's wispy as fuck! And I'm not feeling much in the way of vapor shootin' down my gullet (smoooooth!!), then BAM!!! upon exhale. I've been looking for a small water piece for my Dyna's the last couple weeks. Not no more! This is the way for me.

That’s how I run it as well, but yesterday I was bored and taped off the airport, and it was perfect that way for a friend of mine who tends to runs out of breath too fast when vaping. That combustion lung capacity! :D
 

RustyOldNail

SEARCH for the treasure...
My 2020m is still lost somewhere in my house. I have been searching for 6 months now, top to bottom, cannot find it. You would think after buying several more Dynavaps I'd lose the itch, but nope, still want to find it. Mark my words fam, I will return one day with a success story on finding it. It might be several years from now, but I will tag this post and share my victory. It will be a glorious day.

“SEVERAL YEARS”..... you PROMISE?
 
Top Bottom