StringTheorista
Well-Known Member
Yes, I cover the airport, then roll it to open the carb for fresh air near the end of the pull.
Dynavap VapCap
- Thread starter Fenton Mewley
- Start date
KidFated.
Unknown Member
All of my “at home” stems are all wood Vongs.. they clean up realllll nice.. cocobolo Ed’s and Dynavap sent me a body instead of a stem due to some miscommunication, and I’ve been using that condenserless ever since. Of course the wood will soak some resin, but I rarely need to use a cleaner other than a scrape after warming them up some. Maybe I’m a weird kid from the sticks but that’s okay. Good to know you are ready to go when I am, your work is quite beautiful. I’ll be in touch soon
condor020
Well-Known Member
do you have any link to see what the heater look like, i cannot find anything on it.
Anyways i still not know what too choose but more i read about dynavap more it look like a really nice item full with a smart conception, i wonder which one would be the most intersesting to vape for hashich ? i see that u can control temperature by where you aim your flame on so maybe a Xl would be interesting for me that i need to vape more at 200C +
Last edited:
Cocobolo is nearly saturated with oils and extremely dense, so it will be quite slow to absorb in. Eventually it will start to stink and smell though, adversely effecting the flavour. Less dense woods or less oily woods would not fair as well, for example Maple and Walnut are not good woods to be getting condensates on.
Good to know you are ready to go when I am, your work is quite beautiful. I’ll be in touch soon
KidFated.
Unknown Member
Yeah, they do take on their own odor.. I haven’t found taste to suffer in the long run with any of my wooden pieces except the LB cuz it was hard to get under the trench, but taste has always been good still for me as long as I kept up. Maple reallllly sucks in some scent.
My dugouts always soaked up lots of scent too, wondering how the dynastash will play out
My dugouts always soaked up lots of scent too, wondering how the dynastash will play out
Squiby
Well-Known Member
I use my VapCaps with Hash and Concentrates. The Vapcap will handle them with ease. You would think that they were made for eachother.
I vape both hard and soft hash. With soft pliable Afghani hash I pinch off a bit and flatten it into a thin pancake. Just pop it in the chamber and heat the cap slightly last the click. Hard Moroccan hash is sliced paper thin with a razor.
Now for empty concentrates like wax and shatter or rosin, they vape beautifully with a modified concentrate pad shoved into the chamber. Pat a bit on top, put on the cap and heat.
Here is my approach to using a concentrate pad.
http://fuckcombustion.com/threads/best-of-dynavap-vapcap.24345/#post-1145395
@Lady V The longer I have my Vapcaps, the more I am convinced that a variety of Vapcaps are essential. Absolutely essential. They all work the same with slightly different personalities.
The answer to your question is not about if you should get an XL or not, it is about deciding on your most favorite Vapcaps in any given area. Favorite Ti Woody Ss. Favorite Woodys and XLSs. Best Omni combos. Creative M mods. The most hypnotic @phattpiggie Twists and dramatically beautiful creations. The best @stardustsailor Bark and Hammer, or maybe some tool box love. Artistic storage and stunning @Winegums VonGs for your water.
You wanna know if you should get and Vapcap XL? Hell yes! Absolutely, without a doubt. Yes. I love having the different lengths and shapes to choose from. They are all great, not better or best, just a bit different.
StringTheorista
Well-Known Member
Last edited:
kushkush
happy camper....
Question for you... how many times do you use that concentrate pad before you wash or replace it?
Lady V
Well-Known Member
Alright, I've read quite a few of your posts and they have played a big role in my decision making over how to use vapcaps. Hell the moment I read the degummed fibre filter post I was sold on buying one.
I think there should be a dedicated @Squiby thread where everyone here says what they love about her and why!
The XL it is then! Thank you! As I 've said before, you 're magic!
Last edited:
Curiousvaper
Well-Known Member
I just got my OmniVap XL Titanium and it's great but after about 15 or so sessions it has developed a slightly burnt/bitter taste as I take a draw. I checked to make sure I didn't combust after each session and confirmed. I respect the click and all that so I'm not sure what else it might be.
And secondly when I want to soak the individual parts of my Omnivap in iso, are there any that I need to be careful with and not submerge? I might've seen somewhere that the parts with the o rings cannot be submerged but I couldn't see any o rings on any of the parts.
Anyway thanks for all the info guys, greatly appreciated.
And secondly when I want to soak the individual parts of my Omnivap in iso, are there any that I need to be careful with and not submerge? I might've seen somewhere that the parts with the o rings cannot be submerged but I couldn't see any o rings on any of the parts.
Anyway thanks for all the info guys, greatly appreciated.
alittledabwilldoya'
Sapphire Powered Dabstronaut.
Here's my version of an induction heating station based on @Pipes info in the DIY thread. Functional for 2 dynavaps. Aluminum star in the center is a heatsink that you rest your dynavap in to heat. First button latches and enables/disables. Second button is momentary to apply heat. Really takes the dynavap to a whole new level.
Good Lord!!!
Ramahs
Fucking Combustion (mostly) Since February 2017
How the hell do you register for the emails? I haven't been getting them, so I logged into my Dynavap account/profile on their website and looked through the settings, and am not finding it?!?!
kurt6652
Well-Known Member
You might just need to clean the condenser. I noticed a harshness when it gets gummed up.
cybrguy
Putin is a War Criminal
If you have ever set up an account with them in the past you should be getting them. Have you checked your spam filters? If you have received order or shipping acks from them in the past you should be golden.
George has recently confirmed that his orings are quite resistant to ISO. There are orings (now gray) on the Omni condenser (on the mp part and the moving part) and on the tip where it joins the stem.
Last edited:
Ramahs
Fucking Combustion (mostly) Since February 2017
The heat has been a little harsh lately. I think I NEED a J hook. I know this topic has been covered but I wanted to know which J hook is your favorite and where can I order one....on sale preferably.
I'm interested in a couple different sized J-Hooks as well. I'm leaning towards getting some from HERE
In my experience, they are always lose at first. After a number of heat cycles, they tend to snug themselves up...as if it was intendede that way to fit the cap to your unique tip...but that's just a guess/conjecture.
I wonder if that means that if I use the "Buy a Nonavong XLS, Get a free mystery Dynastash" sale, that I may have to wait a couple of months for my Dynastash? That sucks, but I can live with it.
Ummmmm, yeah. You just need to clean your shit. LoL
I always remove the o-rings before I soak, but I rarely soak. Most cleans just involve a wet q-tip and Iso
Brewervapesalot
Well-Known Member
Ordered an omni titanium. Looked at the XL, but FAQ's says extra centimeter or so doesn't help cooling; extra length has no function and is just for preference it says. I wanted a storage box with the magnet too, so regular length it was, as only boxes available right now don't fit XL.
Almost got the M, as the $80 starter kit looks like a good deal. But it seems the Omni has a couple extra features and I think less O-rings, to replace...
Thanks for all the posts! They really helped decipher this gizmo quickly, and made the shopping more fun
I never liked metal bowls for combusting, way too hot and seemed harsher, but I think for vaping it might be different. Also figure I gotta have one non battery vape!
Really like supporting metal workers and like the mechanical nature of the device. Good to see silicon valley, app driven, battery powered anything have some competition too!
Almost got the M, as the $80 starter kit looks like a good deal. But it seems the Omni has a couple extra features and I think less O-rings, to replace...
Thanks for all the posts! They really helped decipher this gizmo quickly, and made the shopping more fun
I never liked metal bowls for combusting, way too hot and seemed harsher, but I think for vaping it might be different. Also figure I gotta have one non battery vape!
Really like supporting metal workers and like the mechanical nature of the device. Good to see silicon valley, app driven, battery powered anything have some competition too!
I use my concentrate tip for quite some time before I find it needs to be cleaned and repacked with mesh. I find that all I need to do is go in from the O-ring side with a q-tip and it's good to go for a while. When the taste is starting to go I will usually clean the whole thing out.Question for you... how many times do you use that concentrate pad before you wash or replace it?
Ramahs
Fucking Combustion (mostly) Since February 2017
Shit...I was wrong. I just want to clarify that!!!!!!!!!!!!!
I found the emails. They weren't categorized as I was expecting them to be by my filter...but I was getting them. My bad :-(
Summer
Long Island, NY
If someone isn't getting DV emails just send an email to info@dynavap. I too wasn't getting them along with a few other members for a while, but they just started showing up again.
@Lady V, I couldn't possibly know what you will wind up liking & everyone has given good input, so here's a variation. I have no preference here, just thought I'd throw out that you have options.
As you have the 17M, you can get a vong stem & switch out the M condenser with the vong stem & then use that in a bubbler via a 14mm joint. Then, if you purchase the omni XL condenser assembly (just the condenser & mp, no stem or tip & cap), then you can an use your M stem & tip/cap on the omni assembly.
After 20% discount:
Vong stem - $28
Omni XL assembly - $72
For another $48 you can get either:
1) the '18M with will give you another ss stem style, a different tip variation & a cap
or
2) a ti tip & cap.
With these configuration, it will give you a handle on what DV legos you will like for future purchases.
I'm sure you'll be happy no matter what you order.
@Lady V, I couldn't possibly know what you will wind up liking & everyone has given good input, so here's a variation. I have no preference here, just thought I'd throw out that you have options.
As you have the 17M, you can get a vong stem & switch out the M condenser with the vong stem & then use that in a bubbler via a 14mm joint. Then, if you purchase the omni XL condenser assembly (just the condenser & mp, no stem or tip & cap), then you can an use your M stem & tip/cap on the omni assembly.
After 20% discount:
Vong stem - $28
Omni XL assembly - $72
For another $48 you can get either:
1) the '18M with will give you another ss stem style, a different tip variation & a cap
or
2) a ti tip & cap.
With these configuration, it will give you a handle on what DV legos you will like for future purchases.
I'm sure you'll be happy no matter what you order.
Last edited:
ArgetCraio
Member
Just wanted to add, I ordered the '18 M from Vaposhop and the cap was actually very tight in the beginning. Now, after a few bowls it became looser and is relatively easy to remove (but still too tight for the magnet, could be a weak magnet though
). Might have been a different batch or something...Definitely agree with the others on waiting and heating it a few times
On a different note: do you guys recommend filing the SS tip on the '18 M for more airflow like the 17 version? Or is there too little difference?
gimmiemore
Well-Known Member
I don't really need anything for now, but I'll buy the 2018 M, and yay I'll get 2 free lighters.
I like supporting dynavap plus I miss the M since I gave my 2017 model to a friend, who totally wrecked it btw hehe.
I wish DV would sell concentrate pads that fit the vapcaps.
BTW doe's anyone know what the M stands for? I feel like I knew this but forgot.
I like supporting dynavap plus I miss the M since I gave my 2017 model to a friend, who totally wrecked it btw hehe.
I wish DV would sell concentrate pads that fit the vapcaps.
BTW doe's anyone know what the M stands for? I feel like I knew this but forgot.
Summer
Long Island, NY
You never let us know what you thought of this piece. Please do.
Could you please tell me which specific size drip tip would work? I would like to get both the longer & shorter glass pieces as shown in your picture. Thanks much.
Last edited:
