Dynavap VapCap
- Thread starter Fenton Mewley
- Start date
PeteSeattle
Well-Known Member
Here! But may not wait for sale.How many cappers have already made their choices for the next sale?
florduh
Well-Known Member
I'm due to receive my first VapCap, a Ti Woody, tomorrow. I'm slowly wading through this thread, but I have two questions:
1.) Even without adjusting the screen, is it possible to only use small amounts? I'd like to vary the amounts of herb I use in each session and would like to avoid moving the screen if possible.
2.) Is it possible to take a hit or two on a full VapCap, stop, then vape the rest a few hours later? I realize there would be flavor reduction but it seems like it cools down pretty quick.
Thanks in advance!
1.) Even without adjusting the screen, is it possible to only use small amounts? I'd like to vary the amounts of herb I use in each session and would like to avoid moving the screen if possible.
2.) Is it possible to take a hit or two on a full VapCap, stop, then vape the rest a few hours later? I realize there would be flavor reduction but it seems like it cools down pretty quick.
Thanks in advance!
CalyxSmokr
Well-Known Member
1. I think it is better to pack it firmly - so kind of "no"
2 yes - that is where this vape excels. And that kind of solves #1
natural farmer
Well-Known Member
Welcome to the club buddy!
1) YES, definitely yes! I hate moving the screen as well and I get amazing results with whatever size of load I put in. From a couple of specs to a full and lightly packed bowl. I enjoy putting just a tiny pinch in there (0.01 maybe or less) and finish it in one big hit!
2) Of course it's possible like with any other on-demand vape. Taste depends on how you hit your last times before putting it down... If they are small, low temp hits you might not experience any flavour loss.
Enjoy!
MrMonss
Well-Known Member
Hi guys,
Concerning the placement of the CCD filters, on the steel Tip there is only one location (line), whereas on the titanium there are two.
Placing the filters perfectly on the line can be difficult (especially with titanium filters), have you noticed a difference in rendering when these filters are positioned at the bottom of the chamber, or when the tip shrinks ??Because it's really much easier to place them here, on the bottom of the chamber.
To make the sandwich filter between two grids on the steel tip it seems obligatory to position a grid in this place, doesn't it ?
Have a nice day
Last edited:
I have!How many cappers have already made their choices for the next sale?
I'll be getting an XL Omni condenser assembly w/ mouthpiece if it's available by then. 
It's about the only thing I need at this point. Ooh, and probably a Ti-Glassy replacement stem, cause ya know, glass is cool. 
Shit, at that point I might as well get another Ti tip too to complete the package... 
So basically an XL Glass Omnivap? On another note, my NonaVonG-XLS from this last sale is set to be delivered tomorrow! I'm pretty stoked!
1. Yes! I have a gen 2 tip in my Woody, which has no slots for adjustable screen, so my bowl is always set to max volume. However I frequently pack it only half full and get great results like this.
2. Yes! I did it earlier today. Took two light hits off my M and saved the rest for later. Worked like a charm! (And it was packed only about 3/4 full)
Last edited:
needalift
Well-Known Member
Curious , is his just in my case or if anybody else experiences this ..
So I'm not lucky enough to have seasonal allergies , I'm blessed with them all year round . When I was combusting , it really set them off ( made them way worse to the point I could barely breath and my ears would close up ). I found vaping and it helped a lot , but my allergies have still been sensitive to the vapor from all my vapes . BUT my vapcap doesn't bother them at all . It's been the biggest blessing to come out of finding this vape
So I'm not lucky enough to have seasonal allergies , I'm blessed with them all year round . When I was combusting , it really set them off ( made them way worse to the point I could barely breath and my ears would close up ). I found vaping and it helped a lot , but my allergies have still been sensitive to the vapor from all my vapes . BUT my vapcap doesn't bother them at all . It's been the biggest blessing to come out of finding this vape
Farid
Well-Known Member
Curious , is his just in my case or if anybody else experiences this ..
So I'm not lucky enough to have seasonal allergies , I'm blessed with them all year round . When I was combusting , it really set them off ( made them way worse to the point I could barely breath and my ears would close up ). I found vaping and it helped a lot , but my allergies have still been sensitive to the vapor from all my vapes . BUT my vapcap doesn't bother them at all . It's been the biggest blessing to come out of finding this vape
I think it has to do with the heavier conduction in the VC vapor profile. I think that also contributes to the vapor not being harsh dispite the short air path. Convection vapor forces hot air on your throat with a small airpath like this, and I find my allergy symptoms are made worse by this. I also find that I taste the terps stronger with convection, and I wonder if consuming more terps adds to allergy symptoms. If so, it would be a silver lining to the VC's lack of strong flavor compared to a 100% convection device.
All I know is that I prefer the VCs hybrid vapor to other devices because it is so much easier on the lungs. I miss the pure flavor from 100% convection, but I don't miss the dry throat and having to sip water after every hit.
I tried out my xls nonavong earlier and all I can say is wow.absolutely love it.
Already planning my next purchases.i think I may have a dynavap addiction developing
Has anyone travelled with the M in hand luggage ? Not sure if it will pose a problem with security ??
Thanks
Already planning my next purchases.i think I may have a dynavap addiction developing
Has anyone travelled with the M in hand luggage ? Not sure if it will pose a problem with security ??
Thanks
mucsusn
60 going on 20
Got my green package today! More M's, time for some evangelism!
Edit - Also received my first ever glass VC's........I am really liking the glass S! And now, a short time later, I have broken in my first OG..........I sort of went backwards in my VC trek, but now I am really impressed at the vision that George had, and still has. Nice work, DynaVap team! In a world of mediocrity and chaos, you guys do yeoman's work.
Edit - Also received my first ever glass VC's........I am really liking the glass S! And now, a short time later, I have broken in my first OG..........I sort of went backwards in my VC trek, but now I am really impressed at the vision that George had, and still has. Nice work, DynaVap team! In a world of mediocrity and chaos, you guys do yeoman's work.
Last edited:
Squiby
Well-Known Member
I found vaping and it helped a lot , but my allergies have still been sensitive to the vapor from all my vapes . BUT my vapcap doesn't bother them at all . It's been the biggest blessing to come out of finding this vape
The Vapcap has been a total game changer for me. In the past, with other vaperizers, I my throat and lungs would be negatively affected which would limit my consumption. The Vapcap somehow magically delivers smooth vapor.
Then, the addition of a hemp filter sandwich brought it up another notch. The filter prevents tiny particulates into the vapor path and into my lungs. Super smooth non-irritating vapor. No harshness. No coughing.
I love cleaning my Vapvap only to find that the condenser has only a light film of shiny resin with no bits of plant matter stuck to the side and that it doesn't really even need cleaning. No particulates in the condenser means none in my lungs
florduh
Well-Known Member
How do you guys find using the VapCap's in public? I realize the glass versions have a "Crack-Pipey" look to them. But I'm not sure that applies to a nice looking wood or metal version. It's not like there's "Crack Connoisseurs" out there.
But I can't help wondering if I'll feel sheepish torching and twirling something in public vs taking a hit off of a battery powered vape
But I can't help wondering if I'll feel sheepish torching and twirling something in public vs taking a hit off of a battery powered vape
My last sale order shipped today. I'm really excited now. I hope it arrives before the end of the week.
I've actually been wondering this as well. I used to like getting high on my way home from work (~20 minutes walk, generally in the evening), and with a regular pipe I could manage since taking a hit took no more than a few seconds, but with my VapCaps I have to heat them up for a good 15-20 seconds.
The only solution I could think of for my problem would be to use a quad torch so it heats up within 5-6 seconds as opposed to the 15-20 with my single one.
How do you guys find using the VapCap's in public? I realize the glass versions have a "Crack-Pipey" look to them. But I'm not sure that applies to a nice looking wood or metal version. It's not like there's "Crack Connoisseurs" out there.
But I can't help wondering if I'll feel sheepish torching and twirling something in public vs taking a hit off of a battery powered vape
I've actually been wondering this as well. I used to like getting high on my way home from work (~20 minutes walk, generally in the evening), and with a regular pipe I could manage since taking a hit took no more than a few seconds, but with my VapCaps I have to heat them up for a good 15-20 seconds.
The only solution I could think of for my problem would be to use a quad torch so it heats up within 5-6 seconds as opposed to the 15-20 with my single one.
mucsusn
60 going on 20
"Public"......hmmmm.......context here, as I am in an illegal jurisdiction, so I confine my public mostly to the car. Sometimes, I can grab a discreet outdoor or restroom event, and the VC's excel at either. I carry a small shoulder bag, so having a few preloaded VC's is never an issue. Part of my morning checklist.How do you guys find using the VapCap's in public? I realize the glass versions have a "Crack-Pipey" look to them. But I'm not sure that applies to a nice looking wood or metal version. It's not like there's "Crack Connoisseurs" out there.
But I can't help wondering if I'll feel sheepish torching and twirling something in public vs taking a hit off of a battery powered vape
florduh
Well-Known Member
Yeah, If I end up enjoying the VapCap system, My plan was to have 2 loaded if I'll be out for a while. No mess on the go. And no worrying that 2 different batteries are charged!
Sketch420
Well-Known Member
How do you guys find using the VapCap's in public? I realize the glass versions have a "Crack-Pipey" look to them. But I'm not sure that applies to a nice looking wood or metal version. It's not like there's "Crack Connoisseurs" out there.
But I can't help wondering if I'll feel sheepish torching and twirling something in public vs taking a hit off of a battery powered vape
Ya that's my only real gripe with the VC, still doesn't look right twirling and heating it when people are around. But I can usually find a place where I can heat and hit it quickly. The battery powered vapes are better for an in crowd situation, but the VC just seems to work so much better extraction wise. Now @Pipes has created an interesting way to combat that by using an induction heater, a bit more inconspicuous. Check the DIY thread. If you can hide the unit in a cup it works amazing (so I've heard, still waiting on the finished portable product). Happy vaping!
mucsusn
60 going on 20
I usually have 4, and I've never run short!
magnet question here..
i read earlier in the thread about magnetization directions. but to clarify.. if my vapcap sits off to the side of my magnet (it gets repelled when in the direct center of the magnet) that means i have a diametrically magnetized magnet and i need an axially magnetized one, correct?
https://www.kjmagnetics.com/magdir.asp
i read earlier in the thread about magnetization directions. but to clarify.. if my vapcap sits off to the side of my magnet (it gets repelled when in the direct center of the magnet) that means i have a diametrically magnetized magnet and i need an axially magnetized one, correct?
https://www.kjmagnetics.com/magdir.asp
cybrguy
Putin is a War Criminal
The "M" steel tip has no scoring to hold screens in it so the CCD rests on the lip at the bottom. There are 2 scores inside the Ti tip, so there are actually 3 CCD positions inside the tip, so 3 different possible bowl sizes. This also makes it much easier to put some filter materiel (mostly degummed hemp fiber) in the bowl between CCDs fixed in place. I haven't tried this yet, but it is on the list...
You could also do this in the "M", but with no scoring it is harder to keep the second CCD in place.I think the maximum bowl size, just one CCD on the lip at the bottom, are nearly identical between the 2 tips if not slightly bigger in the "M".
mourningbell
Certified human
Order a magnet or a Dynastash (which has a built in magnet) with it. Cools it down pretty quickly. And I prefer my M to all my battery portables.
What battery you use to compare what M beat you.
PeteSeattle
Well-Known Member
I used the Hopper as well I haven't touched it since I purchased my the Ti Woody and other models.
I usually medicate before going out if I'm not driving. But since I work out of a home studio is use that as my vape room. Also just on the balcony or the backyard. Don't rule out camping, hiking, backpacking if you are able to. Before I had to lug along a battery bank to charge The hopper. I didn't mind it but with the VC it's just so much easier.
Okay, here's a Monday pick me up ...
"It's bigger on the inside!" or "the Doctor's new sonic screwdriver." Sorry for the geek speak.
I usually medicate before going out if I'm not driving. But since I work out of a home studio is use that as my vape room. Also just on the balcony or the backyard. Don't rule out camping, hiking, backpacking if you are able to. Before I had to lug along a battery bank to charge The hopper. I didn't mind it but with the VC it's just so much easier.
Okay, here's a Monday pick me up ...
"It's bigger on the inside!" or "the Doctor's new sonic screwdriver." Sorry for the geek speak.
Last edited: