• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

WakeAndVape

VapeLife X
you cant miss 5 minutes of this thread...
i swear to god or there are pages of missed posts. Insane.

The M's Airflow is adjustable by moving the O-Rings on the condenser.

also for those who want to soak the cap without the risk of 'stressing' the O-Rings by removing or soaking:
why not just get a small dish and only submerge the tip leaving the part with the o-rings dry?

seems like a win-win.
 

voodoo_vape

Vapour RebeL
Right. I know everyone has different methods. My OG glass VapCap broke after a couple of weeks so I didn't get to master it, but I never filled it to the brim - I just put a tiny pinch of ground herb or a 'lil nugget in and got three or four decent hits/cycles most times. What I'm trying to say is that I would prefer a tiny but fresh load each time over reheating the same load 7 or 8 times. This method clealy works for you though and is a testament to how efficient these beauties are and how quickly they cool down as well as heat up :peace:

Me too. I only load the amount of herb I can vape in one sitting. Dump, and load a fresh bit for the next session.

I have to agree that this vape gives you the comfort and the luxury to chose whether you are going to use a grinder or not. Although I've always been using one, I find it very convenient to just grab a nug and put it and extract the whole juice as if grinded, maybe even better!!

Actually I was amazed at how cool and smooth the vapor is despite being thick! And first hit is wonderfully tasty.

Taste wise the whole experience is absolutely fantastic... especially in 1st and 2nd hit.... 3rd and 4th are a bit toasted but nowhere near annoying..pleasantly annoying maybe..
Moreover, I find the taste lasting longer than the GH and tasting better as well... The hopper can get you really stoned in one go but the taste is a VC winner I'd say!! Amazing!!

That would explain why my silicone mouthpiece won't seal with any of my 14mm joints.

I ordered the fat mouthpiece as well and it doesn't pair up with my 14mm joints as well.. The NonaVong blackwood makes a perfect match and it hits really hard... even for using it straight through the mouth the taste is really good.. I have to find a sort of mp for it so that it doesn't wear off from any spit or so..

edit: I forgot to say what I wanted from the 1st place :p
I've been changing over the Vong and the M and the inner o-ring of the condenser has become a bit lose and I find it difficult even make it go through the M body on the default o-ring position. Maybe extra lubricating will do the job.. I def need an extra M though to pair it with my vong.. I think it worth from buying an extra condenser/Ti/Cap combo...
 

cybrguy

Putin is a War Criminal
I thought they automatically shipped the fatter ones unless you told them you were going to use it in the Dynastash or asked for the smaller ones, but I may be wrong.

Actually, newer DSs may be drilled out a little wider to accommodate the bigger mps (and Nonovongs) as well.
 

Vapor_Eyes

taste buds
I thought they automatically shipped the fatter ones unless you told them you were going to use it in the Dynastash or asked for the smaller ones, but I may be wrong.

Actually, newer DSs may be drilled out a little wider to accommodate the bigger mps as well.
I ordered my OG with a Dynastash and other goodies. That may be why I got a slimmer mouthpiece. That was over 6 months ago. I have a VonG and several adapters for using my VapCaps with water so it's not a big deal.

Edit: In fact, I prefer having the small mouthpiece because it fits in my Dynastash, and I can use other options with water if necessary.
 
Last edited:

jambandphan03

in flavor country
Actually I was amazed at how cool and smooth the vapor is despite being thick! And first hit is wonderfully tasty.

I agree, I was really impressed on how smooth and cool the vapor is for how small the vape is, the condenser really does make a difference as opposed to a direct path like you get on most other vape models. I find the vapor pleasant and very satisfying. Of course everyone is different, but this has been my experience.
 

sag

Well-Known Member
Ok, I give up. You people are killing me with all the talk of the dynacap. This forum has cost me some money. It started with the Haze, then went on to the firefly2 followed by the grasshopper. Other than the Haze, which had too many small parts for these old eyes and arthritic hands I have enjoyed them all. The thing that I find is a hassle about my portable collection are the batteries. So I'm-a hopin that a new omni will be the ticket. Thanks for all the good information on this forum.
 

voodoo_vape

Vapour RebeL
For the life of me I can't figure out how to do that.

Try inserting the condenser from the tip side having only the smaller o-ring on at the spot that you want it to be and then you put the very 1st when the condenser is already in. I've found that putting it higher than the carb hole, will make your M function as if the hole is permanently closed and I'm using the Vong like that which makes sessions much juicier.. O-rings need to be properly lubricated (spit, nose/forehead-area fat,wax etc) otherwise it won't make it through the body.
 

cybrguy

Putin is a War Criminal
Its a matter of pushing the Oring to be between the tip and the air hole. After the air hole you get airflow, before (towards the tip) the air hole air is blocked.

Added: I like to say "air hole" rather than "carb(uretor)" because they have different functions. A carb is meant to clear the vapor/smoke from a chamber like a bong. What the air hole does is change the incoming air dynamic so when closed all the air you get must come past the hot cap and therefore gets heated and heats the goods.
 
Last edited:

ander

Well-Known Member
I've broken my OG body 2 month ago. I really loved my OG.
I had another VapCap attack today. I'm poor, I'm in EU, I'm on a fork and I'm ready to steal some money:

---> A VapCap M from Vaposhop for about 50$. 2 days and the attack will be cured.

<--- An Omnivap from Dynavap for the (great...) price of 136$.

Questions... how much the price of the omni will rise in the trip? A long trip? How long? Customs..? :uhoh:

Help me please VasCap Boys!
 

voodoo_vape

Vapour RebeL
Here's some M porn, not much though.. I just wanted to show you how the vapour swirls through while building up.. really nice... This was just one cycle, according to @baxter as well, which I agree to that term.. It's a click cycle.. you can say that... Speaking of which, I managed to get 5 cycles out of the cap. Four of them were pretty milky, 5th was barely visible, but there was some..

edit: at 34" you can hear the click going off.. loud and clear I'd say.. DOn't you people hear your clicks that way as well? It can't be missed, if not faulty... and you can't combust as long as you respect it!! (once again :p )

cheers!!
 

Alegre

Pobre payaso
Try inserting the condenser from the tip side having only the smaller o-ring on at the spot that you want it to be and then you put the very 1st when the condenser is already in. I've found that putting it higher than the carb hole, will make your M function as if the hole is permanently closed and I'm using the Vong like that which makes sessions much juicier.. O-rings need to be properly lubricated (spit, nose/forehead-area fat,wax etc) otherwise it won't make it through the body.

Its a matter of pushing the Oring to be between the tip and the air hole. After the air hole you get airflow, before (towards the tip) the air hole air is blocked.

Added: I like to say "air hole" rather than "carb(uretor)" because they have different functions. A carb is meant to clear the vapor/smoke from a chamber like a bong. What the air hole does is change the incoming air dynamic so when closed all the air you get must come past the hot cap and therefore gets heated and heats the goods.

What @voodoo_vape said.

Push The condenser out and reposition the small O-Ring on the condenser and it will change the air 'dynamic'

I don't think if functions like the airflow adjustment on the omni (which I haven't tried yet)...but it does cause the draw to change from free to restricted

Thanks guys! I'm going to play with that to see if I can leave the "carb" or "air hole" open just enough to allow a little bit of air. I really like the vapor I get with the carb covered but I almost pop an artery every time I do it :lol:

I've been using my M for a week now, first vapcap and first time with a butane vape and must say that I'm loving it! I'm getting much better at heating it using my 3 flame torch and today i got a huge milky hit that for a second thought I had combusted.....but no, no combustion and actually tastier than you would think.

I can't believe how efficient the vapcap is, I micro dose, just a pinch works for me. Like some have suggested, I put a Lil nugget in there and works great! It takes me just a few short minutes to get me to where I want to be.


There are two things that I'm not crazy about but both have remedies. First is the draw restriction with the carb closed....I will play with the o rings to allow just a bit more air but mostly close.

Second is my torch, from Dynavap sounds like a jet late at night when the house is quiet. I need to get something quieter.

This vape has put my other vape purchase plans on hold. If anything now i want more Dynavap stuff! :rockon:

Edit- wrote propane instead of butane :D
 
Last edited:

ander

Well-Known Member
Price won't rise...
My orders took less than two weeks....
I wasn't charged customs duty - I'm pretty sure most people who have posted here said the same thing...:peace:
But don't steal man - that's just bad :sherlock:
Fine.
Sounds good.
Thanks. Sorry... I tend not to dive in this thread... it's too much dangerous.

Don't worry man. But don't tell my wife I took the money from the bank account ok?!;)
 

grokit

well-worn member
...for those who want to soak the cap without the risk of 'stressing' the O-Rings by removing or soaking:
why not just get a small dish and only submerge the tip leaving the part with the o-rings dry?

That's what I've been doing with my ti woody. I just submerge the part of the tip that has the screens in a shot type glass, or what I use is a very small jar for a bit. I don't even remove the tip from the stem.


Actually, newer DSs may be drilled out a little wider to accommodate the bigger mps (and Nonovongs) as well.

Yup there's more than enough room for a nonovong or an old-style soft mouthpiece in my dynastash :nod:


I've broken my OG body 2 month ago. I really loved my OG.
I had another VapCap attack today. I'm poor, I'm in EU, I'm on a fork and I'm ready to steal some money:

---> A VapCap M from Vaposhop for about 50$. 2 days and the attack will be cured.

<--- An Omnivap from Dynavap for the (great...) price of 136$.

Questions... how much the price of the omni will rise in the trip? A long trip? How long? Customs..? :uhoh:

Help me please VasCap Boys!

The sale will be over after 4/20, meaning you would pay an additional 15% plus the international shipping. If you decide to go through dynavap, you could also add an og glass replacement body to your order.


:sherlock:
 
Last edited:

dopse

Well-Known Member
Having dealt with all sorts of battery-powered vapes (Solo, Air, Grasshopper) , I am really looking forward to the peace of mind the omnivap will provide me with. As I started my journey with the vaponic, I am already familiar with the perks of butane vapes. Ultimately I could not any longer be bothered with the crackpipey looks of it and the hassles of explaining the device to anyone I vaped with.

Yesterday I finally pulled the trigger after I've had an eye on Dynavap since the early beginnings. I ordered an Omni Ti, an M, a Padauk Dynastash, hemp gum, 3 Ti Screens, a silicone mouthpiece and a snap stash. Is there anything I should add to it?
 

almost there

Well-Known Member
Having dealt with all sorts of battery-powered vapes (Solo, Air, Grasshopper) , I am really looking forward to the peace of mind the omnivap will provide me with. As I started my journey with the vaponic, I am already familiar with the perks of butane vapes. Ultimately I could not any longer be bothered with the crackpipey looks of it and the hassles of explaining the device to anyone I vaped with.

Yesterday I finally pulled the trigger after I've had an eye on Dynavap since the early beginnings. I ordered an Omni Ti, an M, a Padauk Dynastash, hemp gum, 3 Ti Screens, a silicone mouthpiece and a snap stash. Is there anything I should add to it?
Torch, hi temp o rings and o rings
 

Shannock

Well-Known Member
VAS?

..Nah never heard of him mate!

Oqsbb8f.jpg


And yet I keep popping things in the the cart online because it's so hard to not take a great deal when you can! Haven't pulled the trigger yet and I think the only model I can't create from my stoner Lego is a Ti Glassy so don't really need to but hey.... free international shipping doesn't grow on tree's y'know!

:peace:
 

almost there

Well-Known Member
VAS?

..Nah never heard of him mate!

Oqsbb8f.jpg


And yet I keep popping things in the the cart online because it's so hard to not take a great deal when you can! Haven't pulled the trigger yet and I think the only model I can't create from my stoner Lego is a Ti Glassy so don't really need to but hey.... free international shipping doesn't grow on tree's y'know!

:peace:
Good for you killer, I like your style:clap:
 

ander

Well-Known Member
The sale will be over after 4/20, meaning you would pay an additional 15% plus the international shipping. If you decide to go through dynavap, you could also add an og glass replacement body to your order.
:sherlock:
Shit. Now in my cart there's an Omnivap, the OG body... hemp fiber, titanium CCD, O rings and more O rings... oh no, no, NO..! I knew it!!! :doh:
 
Last edited:
Top Bottom