Dynavap VapCap

Stevenski

Stevenski

Enter the Dragon
Winegums said:
I'm kinda tempted to make my own wood stem from tiger maple that I logged myself, and possibly make my own brass mouth tip. This could be an awesome mod platform for me. I make knives and titanium pendants from time to time so I'm well versed in working with small things.
Click to expand...

I see tips & caps in your future. That & creative stem making. Look at some of @phattpiggie's posts & you will see what I mean.

@grokit you need to have the two smaller O rings inside the barrel & the large one in the end of your mouthpiece. You can move the O ring near the carb past it to add restriction & might be a good idea with the new tip design.
 
grokit

grokit

well-worn member
Kasish said:
1 O ring inside the back side of the mouthpiece the other one (big one) on the other side of the mouthpiece inside the groove, the third one should be small and should be normally between the air intake hole and the mouthpiece somewhere midway. @grokit
Click to expand...
Stevenski said:
@grokit you need to have the two smaller O rings inside the barrel & the large one in the end of your mouthpiece. You can move the O ring near the carb past it to add restriction & might be a good idea with the new tip design.
Click to expand...

I'm using the larger x-ring as @Kasish suggested, it's different than yours but seems to be working well.
The two small ones on each end, and the larger one in the middle sealing the mp against the body.

I might try mixing things up with the rings once I get more confident, as I'm looking forward to perfecting my vapcap ritual and will be sure to post more impressions soon. But I will say that that I can already tell that you guys were right and this device hits likes a truck when used properly. My goal is to get consistent results, and I have a feeling that won't be a problem. I knew you guys wouldn't steer me wrong!

:tup::tup::tup:
 
stark1

stark1

Lonesome Planet
blackstone said:
For my next Vapcap, the only thing that I question about Omnivap, is that the metal mouthpiece might hit my teeth and cause damage over time as it's obviously stronger than tooth material?
I have this fear with glass stems too, but very much with a similar spool shaped steel E-cig tip that I stopped using after it contacting my teeth quite often.
Is this an issue with the Omnivap size/shape/material mouthpiece,
or are there options for the Omnivap MP also to combine adjustable airflow with a tooth friendly material?
The wood MPs look more comforting in this area, or even plastic and rubber are safer for teeth than Ti maybe?
I should probably be quiet and choose a Ti woody, a Ti Carbon S or similar!
Click to expand...



If you are concerned about the Omni's metal mouthpiece, you could put a soft MP from an OG over it. While adding a bit of girth, it is super comfy, and psychologically reassuring.....:tinfoil:

A slimmer version is a silicone cap from one of your e-cigs.:lol: Or, a bit of silicone tubing.
 
Last edited:
J

jimfish4130

Well-Known Member
stark1 said:
If you are concerned about the Omni's metal mouthpiece, you could put a soft MP from an OG over it. While adding a bit of girth, it is super comfy, and psychologically reassuring.....:tinfoil:

A slimmer version is a silicone cap from one of your e-cigs.:lol: Or, a bit of silicone tubing.
Click to expand...

When I'm out and about I keep the soft mp on my omni, stops it rattling in my dynastash and it's easier to hold in your mouth, if you push the mp all the way down so it fits in the stash you can't adjust the airflow and it's a little tricky to take off
 
Mr. Me2

Mr. Me2

Well-Known Member
ramram said:
I have a titanium omnivap winging its way to me now, hopefully to be arriving before the New Year :rockon:

I'm in the UK and there is limited lighters with quick delivery. Does this one look any good? https://www.amazon.co.uk/d/3it/GoSy...d=1482757453&sr=8-2&keywords=gosystem+lighter
Click to expand...
You may want to look at this thread for torch recommendations (I hope this link works)...

http://fuckcombustion.com/threads/whats-your-favorite-torch-or-lighter-to-use-with-the-vapcap.23318/
 
phattpiggie

phattpiggie

Well-Known Member
Accessory Maker
@Stevenski there is no other vaporizer on the market that allows for the individual to personalize their device as the VC does. That I know of.

I know you love your UD and logs are probably next in line for customer input.

I can turn a log out of any wood, any shape and make matching stems, I could go all out and decorate the body in so many different ways that seem not to have been explored, yet, but one thing log users can't do is swap out the body.

I can take mine to bits, turn a new body and start a fresh, and have done a couple of times, but not every one is capable or can be bothered to go thru the aggro so once it's built it basically remains the same log you got on day one. New stem perhaps.

Just about anyone can take a stock Ti tipped VC and go anywhere their imagination will take them.

I've backed off posting stuff for fear of 'same old, same' old, but since Feb of this year I've done nothing but stare at a screen for hours working out where I can take the whole VC thing.
Plus it all gets lost as the thread follows the @VapCap success and snowballs.
Not many ideas are new to me which is why I totally encourage anyone who is willing to get stuck in and make new VC stuff, glass, wood, stone, metal, apple or carrot.

If you can't make it and have an idea then share it with the VC community because between us we can make any idea reality, I am sure of it.

FFS we have the most responsive and encouraging manufacturer any of us could ever want open to any and all suggestions.

Saint @Squiby The Patron Saint of all Things Vapcap is nearly catching me up on ideas, not quite but nearly.:)
Squiby your posts, especially the recent fotos, make me realize I ain't the only one with OVCD.

2017 is going to be another successful year for Dynavap and any one else who can bring new things to the table, if you've got an idea, share, if you can make stuff, share.
It can only mean good things for the continued success of a product that is bringing a lot of pleasure to the regular users and surprises and the obligatory VC grin to new users.
 
blackstone

blackstone

Well-Known Member
stark1 said:
If you are concerned about the Omni's metal mouthpiece, you could put a soft MP from an OG over it. While adding a bit of girth, it is super comfy, and psychologically reassuring.....:tinfoil:

A slimmer version is a silicone cap from one of your e-cigs.:lol: Or, a bit of silicone tubing.
Click to expand...

Ha ha, thanks! and sorry for the long post that time.
I think I did see the OG MP on an Omni in a water tool photo here lately, that would probably do the trick alright.
Or I thought of ordering one custom drilled for another tip.
The Carbon (S Ti) mixed with wood MP looks so attractive but from a possible desire to clean things fully, I'm never sure about wood.
Plus it might need a little more care.
I suppose one workaround for this is to buy a number of wooden MPs.

jimfish4130 said:
When I'm out and about I keep the soft mp on my omni, stops it rattling in my dynastash and it's easier to hold in your mouth, if you push the mp all the way down so it fits in the stash you can't adjust the airflow and it's a little tricky to take off
Click to expand...

Thanks for the tip (pun). I'm such a miser, it will be a while before I get my next Vapcap, let alone a Dynastash!
So I'll be using the plastic tube first if they work, but these vapes are so small I'm sure I could find some novel holders locally too.
 
A

Alexis

Well-Known Member
Chose said:
I've just tried to put woody in to the dynastash and I couldn't do it the wood had seeld it self up
Re grown
Hoo no just turn it around you fools
Merry Christmas all
Just say no to Turkey it REALy is gona mess you up
Click to expand...
Not as bad as me the other night, trying to put my Omnivap away into the open top of the quad torch, thinking I had picked up the green storage tube beside it!

I am getting so very stoned with my Omnivap. 3 occasions I have vaped 2 full bowls and had the most brilliant buzz that lasted for hours.
I swearvit is giving me much better effect with the ccd screen, and the looser cap.

Without even trying the new tip in the mail yet.
The Durban Poison I have has come a lonf way curing over my 30 day break. It is very strong sativa, not low grade at all, and with the Omnivap the experience is just brilliant at the moment.

It is a strong vape for sure.
 
Chose

Chose

Well-Known Member
  • Alexis said:
    Not as bad as me the other night, trying to put my Omnivap away into the open top of the quad torch, thinking I had picked up the green storage tube beside it!
    Click to expand...
Alexis said:
I am getting so very stoned with my Omnivap. 3 occasions I have vaped 2 full bowls and had the most brilliant buzz that lasted for hours.
I swearvit is giving me much better effect with the ccd screen, and the looser cap.

Without even trying the new tip in the mail yet.
The Durban Poison I have has come a lonf way curing over my 30 day break. It is very strong sativa, not low grade at all, and with the Omnivap the experience is just brilliant at the moment.

It is a strong vape for sure.
Click to expand...
Yes @Alexis I got busted last night by the mother in law
What's that smell coming from the kitchen she said
Wifey wasn't impressed what's they new pipe you left on the side I went to bed totally mashed up
So tonight I went more stealthy and used another vape I won't name it but it looks just like a pen
Set it to the highest temp and it got the job done but it wasn't satisfying
Nothing compered to the woodey
Whith a little bit Ov love and practice vapcap can't be beat REALY thick clouds very satisfying it's the only vape I want and my omni carbon should arive soon can't wait to use it
Sory can't remember what I was talking about but yes that's what I meamt
Ho yes I'm very happy you can vape again after your 30 day break stay lifted my bro and enjoy that nicely cured herb
 
Last edited:
grokit

grokit

well-worn member
This little vaporizer packs a big punch! I definitely have it down now, I almost combusted right out of the gate with my pastry torch today but no harm I didn't even have to clean it the next hit was tasty.

I can already tell I'm getting another lighter, and of course a stash at some point soon and a shiny new cap, as an old dugout user for decades I love the setup and I'm sure I'll get addicted to the whole system!
 
E

EmDeemo

ACCOUNT INACTIVE
grokit said:
This little vaporizer packs a big punch! I definitely have it down now, I almost combusted right out of the gate with my pastry torch today but no harm I didn't even have to clean it the next hit was tasty.

I can already tell I'm getting another lighter, and of course a stash at some point soon and a shiny new cap, as an old dugout user for decades I love the setup and I'm sure I'll get addicted to the whole system!
Click to expand...

Yeah, a flame big enough to envelope a load of the cap or multiple flames doing the same is my preference for sure. So much quicker.
 
fluffhead

fluffhead

Recovering Idealist
What is the strength of the carbon body? I am wondering if I got a carbon bodied omni, would it be nearly unbreakable or is the carbon body breakable? I have my eyes on a carbon omni, but I figure I want a near-indestructible version if I were to get it.
 
b0

b0

Cloudy...
fluffhead said:
What is the strength of the carbon body? I am wondering if I got a carbon bodied omni, would it be nearly unbreakable or is the carbon body breakable? I have my eyes on a carbon omni, but I figure I want a near-indestructible version if I were to get it.
Click to expand...

And this is the magic of this vape, just buy an Omnivap AND a carbon sleeve and you will have 3 bodies (the omni still comes with a glass stem, right?) an indestructible titanium, a glass one that will help you to know better how the omni tunning works and a carbon fiver that you love.

Everyone wins!
 
Chose

Chose

Well-Known Member
fluffhead said:
What is the strength of the carbon body? I am wondering if I got a carbon bodied omni, would it be nearly unbreakable or is the carbon body breakable? I have my eyes on a carbon omni, but I figure I want a near-indestructible version if I were to get it.
Click to expand...
I think the pure titanium is the most bomb proof but I went for the carbon because it looks so sick and I think it is strong enough to last
I believe any will last you a long time
Just go for the one you are drawn to is my advice
And enjoy you will try them all anyway so go for it
They will all give you great vapour at the end of the day
If you have got the dollars just buy them all I would if I had unlimited funds
Start collecting
 
Last edited:
Mr. Me2

Mr. Me2

Well-Known Member
Do any of the vapcaps have residual smell after a session, or at any time? ,If so, does any model smell less than another?
 
Mr. Me2,
A

Alexis

Well-Known Member
I only know the Omnivap, but I think yes, the vapcap can be quite a smelly vape. Nothing like a smoking device.
In the storage tube it is pretty well contained. But the vape will acquire a slight odor with use, but not such a blatantly obvious odor. And no problem either once shut in the storage tube.

If you combust in it however, then it will stink like a dirty weed pipe or bong.
 
cybrguy

cybrguy

Putin is a War Criminal
Mr. Me2 said:
Do any of the vapcaps have residual smell after a session, or at any time? ,If so, does any model smell less than another?
Click to expand...
The problem with smell comes in mostly when you have accumulated resin. If you have just cleaned your VC it can me made almost completely smell free. But resin smells, so after a couple uses it starts to build up an odor and can get stronger with longer times between cleanings...
 
You must log in or register to reply here.
Top Bottom