Trifecta

Dr. Says I Need a Backiotomy
Couple of quick questions...

I had my eye on a dynastash xl for my new omni xl. How essential is this accessory? My issue with dugouts in the past has been that the herb will get compacted each time I load a new hit until eventually i can no longer load a hit without getting something to break it up or stir it. Does the dynastash make it easy to load or do you find yourself still loading from a grinder?

Does the fat mouthpiece fit around all mouthpieces in their lineup? I know the omni xl does not have an interchangeable mouthpiece since it is apart of the condenser itself. Will the fat mouthpiece go around the titanium xl mouthpiece? And does this work well for 14mm WPAs? Or would i be better served getting a nonavong stem?
 

Ricardo

Well-Known Member
Couple of quick questions...

I had my eye on a dynastash xl for my new omni xl. How essential is this accessory? My issue with dugouts in the past has been that the herb will get compacted each time I load a new hit until eventually i can no longer load a hit without getting something to break it up or stir it. Does the dynastash make it easy to load or do you find yourself still loading from a grinder?/
Lovin' the talk in here today. The Dynastash is obviously not essential but it's a thing of beauty and will complete your happiness. I tried stashing herb just once, didn't like it, didn't find it comfortable for tapping out a load (or sucking, whatever). Some people have double garages or have bored out the herb stash to house a lighter - me, I have my other (blackwood) body in there. I keep my weeds in separate containers :leaf:
EDIT : weird formatting voodoo there....
 

Squiby

Well-Known Member
My issue with dugouts in the past has been that the herb will get compacted each time I load a new hit
You may be able to prevent your herb from becoming compacted if you insert the Vapcap into the dugout and suck your herb up into the bowl rather than pushing and turning.

Does the fat mouthpiece fit around all mouthpieces in their lineup?
Yes. All Dynavap mouthpieces are 10mm wide and will fit into the fat mouthpiece.

And does this work well for 14mm WPAs? Or would i be better served getting a nonavong stem?
I haven't tried it but this thread has the testimony of many folks describing their pleasure in using the fat mouthpiece with water tools.

Having said that, I personally love the VonGs.
 

cybrguy

Putin is a War Criminal
I haven't tried it but this thread has the testimony of many folks describing their pleasure in using the fat mouthpiece with water tools.

Having said that, I personally love the VonGs.
I have successfully used the fat MP before and used it regularly before getting a Nonavong. Since getting the Vong, however, the Nonavong has become the VC I always use at home and always use with water. And it is almost always heated by my JarHead.
 

CuckFumbustion

Lo and Behold! The transformative power of Vapor.
Thank you,

George
Use code DYNASHIP
:clap:Thank you. George.
I ordered the black XL one so that is fine with me, not that it would matter.
Be nice if they color matched, Black is OK I suppose.....
Yea, he probably did them all in one run. But nothing is stopping from you from printing your own. It it one piece with no extras like hinges or magnets.
I had my eye on a dynastash xl for my new omni xl. How essential is this accessory?
Really depends how and where you plan to use it. I went with that as my criteria. Don't use the chamber in mine for materials, but for extra caps. All the other features worked out for me with mine and have used the cooling magnet.

@Squiby mentioned the 'straw draw' technique instead of digging with the cap.

I didn't get a dynastash but a 3D printed stash with a 3D printed funnel. Sure there is a PAX funnel or something that would work with filling your Dynastashs cleanly.

@Squiby like hearing how you used your IH to get people to try the M. And you let your friends keep them. :tup: Way to spread the gospel.
 

cybrguy

Putin is a War Criminal
There were originally 2 sizes of the fat mouthpiece. One that fit inside an early DynaStash and one that did not. The better one for sealing a 14mm piece was the fatter one that didn't fit in early stashes. The stashes are drilled out a little more now.

@ataxian Just wanted to say I was thinking of you last night when I saw my guy. He had Girl Scout Cookies AND Animal Cookies. Got some of both. Feelin real civilized... :lol:

Funny, that made me think of Little Big Man. Great film...
 

invertedisdead

PHASE3
Manufacturer
Apparently it also fits my 10mm mini tube without the fat MP!

GYZo3kc.jpg


Not sure why I never tried this, I've been kinda bummed thinking every VC fits my mini tube except the one I have!

Cool!

@ataxian How's that for a small mouthpiece? :D
 
Last edited:

kuzko

Well-Known Member
How is it that you guys are doing concentrates in the VC without making a mess? The one time I tried it I put a glob in with some flower and it worked great but the tip and cap got really sticky from concentrate residue and I had to do a cleaning.

I saw some people using volcano liquid pads, so the oil doesn’t melt through it into cap? And are you sandwiching it between two meshes? All the pics I saw just had mesh with concentrate on top, wouldn’t that get all up in the cap?
 

ataxian

PALE BLUE DOT
There were originally 2 sizes of the fat mouthpiece. One that fit inside an early DynaStash and one that did not. The better one for sealing a 14mm piece was the fatter one that didn't fit in early stashes. The stashes are drilled out a little more now.

@ataxian Just wanted to say I was thinking of you last night when I saw my guy. He had Girl Scout Cookies AND Animal Cookies. Got some of both. Feelin real civilized... :lol:

Funny, that made me think of Little Big Man. Great film...
I ran out of GSC.

RASPBERRY DOSIDOS will have to do?

F^CK'IN STRONG STUFF!

The "M" from VCAP can handle.
@stark1 you ever consume high quality CANNABIS?
I need more glass?
I like smaller mouthpieces, however most like the size of a DONKEY"s BUTT-HOLE.

Maybe I have had most strains bread from the COOKIE BROTHER'S?
One I like beside GSC is GRANDMA'S COOKIES! When I see it I'll get it!

@cybrguy the new strain coming out by them is: GUAVA; Look for it?
 
Last edited:

Squiby

Well-Known Member
How is it that you guys are doing concentrates in the VC without making a mess? The one time I tried it I put a glob in with some flower and it worked great but the tip and cap got really sticky from concentrate residue and I had to do a cleaning.

I saw some people using volcano liquid pads, so the oil doesn’t melt through it into cap? And are you sandwiching it between two meshes? All the pics I saw just had mesh with concentrate on top, wouldn’t that get all up in the cap?

I use S&B concentrate pads for concentrates with the Vapcap. I've had no problem with any messiness or sticking. I heat the VC with the tip in an inclined position and when I 've finished my toke I place the Vapcap down in a horizontal position. I place enough concentrate for several heat cycles so that I can take it out and about without reloading.

The tip is fitted with a modified S&B concentrate pad. Here is how I've done it.

http://fuckcombustion.com/threads/best-of-dynavap-vapcap.24345/#post-1145395
 

kuzko

Well-Known Member
I use S&B concentrate pads for concentrates with the Vapcap. I've had no problem with any messiness or sticking. I heat the VC with the tip in an inclined position and when I 've finished my toke I place the Vapcap down in a horizontal position. I place enough concentrate for several heat cycles so that I can take it out and about without reloading.

The tip is fitted with a modified S&B concentrate pad. Here is how I've done it.

http://fuckcombustion.com/threads/best-of-dynavap-vapcap.24345/#post-1145395

I guess it’s about holding at an angle, I just held it whatever way and put it back on the magnet. Concentrates might be better for water tools cuz it’s held upright the whole time
 

abcd5432

Well-Known Member
Apparently it also fits my 10mm mini tube without the fat MP!

GYZo3kc.jpg


Not sure why I never tried this, I've been kinda bummed thinking every VC fits my mini tube except the one I have!

Cool!

@ataxian How's that for a small mouthpiece? :D
I just ordered my dynavap, but I also was going ot order a newvape flowerpot. How do you like that vaporzier in comparison? These seem to be the 2 most popular and loved vaporizers on here right now hence why I "need" them.
 

shredder

Well-Known Member
I guess it’s about holding at an angle, I just held it whatever way and put it back on the magnet. Concentrates might be better for water tools cuz it’s held upright the whole time

It also helps if the wire concentrate pad does not fill the entire bowl, and to not store tip down. You don't want concentrates to come in contact with the cap, if you can avoid it.

I learned the hard way, lol. I've had the cap glue itself on the tip, and really junked up a cap with concentrates affecting the clicker.

After using my dv's for concentrates daily for several months, I'm using mine more for herb now and other vapes for concentrates. Dynavaps work for concentrates but imho are not ideal, or at the same level as when used with herb.
 

invertedisdead

PHASE3
Manufacturer
I just ordered my dynavap, but I also was going ot order a newvape flowerpot. How do you like that vaporzier in comparison? These seem to be the 2 most popular and loved vaporizers on here right now hence why I "need" them.

The Flowerpot is the best vaporizer I have ever used. It's basically zero draw resistance with the Showerhead so pretty different from the Vapcap there. As far as Vapcaps go I've only ever used the glass OG model but I think it's awesome for the money. They are both great at microdosing but obviously the FP is much better at macrodosing and group settings, and concentrates. Honestly they are very different from eachother, but that's not a bad thing! Cordless functionality of the VC is awesome on the couch handing it around solo or with a water pipe.

I really want an Omnivap XL.
 

mmenzie

My friends call me "Menz"
Or a tungsten OmniVap!!!!!!
i would like a Damascus body and i KNOW there is a member with one but i withhold any knowledge of the name as i do not want to spoil their anonymity if that is what they choose. i PM'ed George asking for one too but i doubt there will ever be another and i am betting if he did it would be out of my budget anyways
 

shredder

Well-Known Member
The Flowerpot is the best vaporizer I have ever used. It's basically zero draw resistance with the Showerhead so pretty different from the Vapcap there. As far as Vapcaps go I've only ever used the glass OG model but I think it's awesome for the money. They are both great at microdosing but obviously the FP is much better at macrodosing and group settings, and concentrates. Honestly they are very different from eachother, but that's not a bad thing! Cordless functionality of the VC is awesome on the couch handing it around solo or with a water pipe.

I really want an Omnivap XL.

My personal fave is my sic dnail. But truthfully the dynavap line really grew on me. It fits my lifestyle of grabbing a hit or two a few times a day, while busy with other projects.

I'm sure you'll like an omni. I bought a blackwood vong stem for my xl and I really like it. It's functional and looks cool. I use it about 50/50 with water or dry.

And if you get into these vapes you'll love a induction heater. It's like when peanut butter met chocolate.
 

ataxian

PALE BLUE DOT
Cool!

@ataxian How's that for a small mouthpiece? :D[/QUOTE]
Nope. Never. :evil:

Send some over. M sure Mooose would approve, send over a certificate of authencity.....
The Flowerpot is the best vaporizer I have ever used. It's basically zero draw resistance with the Showerhead so pretty different from the Vapcap there. As far as Vapcaps go I've only ever used the glass OG model but I think it's awesome for the money. They are both great at microdosing but obviously the FP is much better at macrodosing and group settings, and concentrates. Honestly they are very different from eachother, but that's not a bad thing! Cordless functionality of the VC is awesome on the couch handing it around solo or with a water pipe.

I really want an Omnivap XL.
You would have hated HAWAII in the 70's then?
We only had JOINTS (ZIG ZAG'S)
No BONG'S just free seedless COLAS! TAILS in SPANISH!
1/4# normal bag size!

SURFER R not as stupid as one believe's.

They were not scared.

A "M" would have been like a ROLLS ROYCE!
 

stark1

Lonesome Planet
i would like a Damascus body and i KNOW there is a member with one but i withhold any knowledge of the name as i do not want to spoil their anonymity if that is what they choose. i PM'ed George asking for one too but i doubt there will ever be another and i am betting if he did it would be out of my budget anyways


Two C notes, not bad really

This one?

vaBERpl.jpg
 
Last edited:
Top Bottom