Seren

Away with the fairies
Um, it was a joke? No worries. :cool:

Ohh....
tumblr_mxdjoiiIJa1t3h7b7o1_250.gif
:D

I also hope to have a dugout sized specifically for the VapCap by the weekend. Let me know if that would be appealing to anyone.

..............Dugout in process then.

Can't wait to see the dugout - @Ed's TnT work is just so beautiful.

Good morning, I couldnt wait to get started on this project ........

2015-07-30%2006.05.20_zpsebxt6pcv.jpg


2015-07-30%2004.53.16_zpsx8kmkunc.jpg

OMG! Simply stunning!! :love:

@Seren! :wave: - Come on back m'dear! You need to get back in on the action :nod:
Thanks for the nudge @VegNVape - I hopped back in on the action! Order placed :tup:
 

rweed

Active Member
Mine is officially ordered. I am excited!

Question, is one able to use the vap as a one hitter after the matericals is fully vaped or would that damage the device/ void warrenty/ poison me?
 
Last edited by a moderator:
rweed,
  • Like
Reactions: Seren

smokum

I am who I am and your approval isn't needed!
I'm really like the progress and ongoing discussion & changes.....

I'll definitely be purchasing a few once they're readily in pay/ship/receive mode (sorry, I just don't do pre ordering knowing my mind state ;) )
 

VapCap

Well-Known Member
Manufacturer
Mine is officially ordered. I am excited!

Question, is one able to use the vap as a one hitter after the matericals is fully vaped or would that damage the device/ void warrenty/ poison me?

You can burn stuff in the VapCap, but I would suggest you don't. The resin will plug the screen and if you use the VapCap correctly, there won't be anything worth anything left anyway. So far everyone that has used it tells me when they smoke what's left after 4-5 cycles in the VapCap, it does nothing for them.
On a more interesting note, I am working with a lab in Colorado right now to do dome scientific studies to confirm efficiency and effectiveness. I hope to have those results before the cannabis cup.

Thanks,

George
 

IAmKrazy2

Darth Vapor
Damn excited to try one of these at The Cup. I will be sure to see if i can try a little concentrates and report back as i believe that has not been tested much thus far if at all.

I think if using myself i would almost exclusively use a torch lighter but excited to try it with a candle or on a stove ect.
 

VapCap

Well-Known Member
Manufacturer
Just in Case I didn't mention this yet.... I will have a booth in the medicating area at the Cannabis Cup August 22-23 In Michigan. Everyone is welcome to come and try out my VapCap and PyroVap, And......See the "Special Cases" these beauties will come in.
Thanks again for all the support!

George
 

anasrzi

Well-Known Member
Glad to see your well up and running again vap cap after the problems with the first fund raiser, everyone's behind you on this. Iv'e put a shout out on a forum i mod at and also a site i frequent all the time, added links to your page's so lets hope there's more early bird orders coming your way for the "special case"
 

natural farmer

Well-Known Member
Just in Case I didn't mention this yet.... I will have a booth in the medicating area at the Cannabis Cup August 22-23 In Michigan. Everyone is welcome to come and try out my VapCap and PyroVap, And......See the "Special Cases" these beauties will come in.
Thanks again for all the support!

George

Any idea about the cost of both vapes after the campaign George? We have a ban on foreign payments at the moment in Greece due to the capital control that is taking place with the banks... :( And I like both so much!!! :ko:
 

VapCap

Well-Known Member
Manufacturer
Any idea about the cost of both vapes after the campaign George? We have a ban on foreign payments at the moment in Greece due to the capital control that is taking place with the banks... :( And I like both so much!!! :ko:

I am working out the details on the cost of the units after the campaign. I hope to raise enough during the campaign to really go after mass production. If I can do this, I should be able to keep the price low.
I Really do appreciate the support everyone here has shown for this product, and let me tell you it inspires and motivates me to make it even better than it was before. I love everyone's feed back as this helps me understand what you are looking for.

Thanks,

George
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Curious about difference between I want it fast, and i want it faster special case, seems they're the same,.first one doesn't say special case (bc it hasn't been updated from last campaign?) and already has its 15 backers...

Also curious about Ti and wood, so buying the $75 Ti perk comes with wood, but we don't know what type yet? There will be options?

Options chosen after ordering a Ti, the wood choice, or will you update with like 3 separate Ti perks for each wooden mouthpiece design?

What about the colored Ti?

And what about that perk also coming with glass, as another perk option maybe or included if its cheap?

How about an early bird Ti too with the above specifications i mentioned too?

Early bird double special case too?
Early bird and regular double Ti perk?
 

VapCap

Well-Known Member
Manufacturer
Curious about difference between I want it fast, and i want it faster special case, seems they're the same,.first one doesn't say special case (bc it hasn't been updated from last campaign?) and already has its 15 backers..

Also curious about Ti and wood, so buying the $75 Ti perk comes with wood, but we don't know what type yet? There will be options?

Options chosen after ordering a Ti, the wood choice, or will you update with like 3 separate Ti perks for each wooden mouthpiece design?

What about the colored Ti?

And what about that perk also coming with glass, as another perk option maybe or included if its cheap?

How about an early bird Ti too with the above specifications i mentioned too?

Early bird double special case too?
Early bird and regular double Ti perk?
OK,
good questions. The I want it faster sold out. It had a ship within two weeks of the end of the campaign. The new one has a ship timeframe of about two weeks. I Will try to get them out as fast as I can, but I'll have to do the first 10 first. I honestly didn't think I'd even sell all 10 of the I want it faster. How cool.

The Ti will have several options for wood. I will post pictures of the options as Ed and I get them ready.

The colored Ti will also be an option. I have some really cool ideas for this! Again everyone's input is welcome. I think it helps the project grow and develop faster and in directions it would not have gone if it was just me.

I will probably offer a glass Ti hybrid too if there is interest in it. The glass is a cheaper material than some of the wood, but the fabrication is still rather involved so the cost will probably be similar.

I will add more perks soon based on feedback.

Big thank you everyone.

George
 

Ed's TnT

Woodsman
Manufacturer
Good afternoon everyone! I hope all is well out there, I gotta say wow to George for sharing the joy with me here at this thread and inviting me to be a part of his project! I appreciate all you all interest in my part of it and than you all for the kind words, I am very grateful to be able to do what I love and offer what I am blessed with, its not much but enjoy my time in the shop and getting out of the box as you all know. I gotta also say that I have had the pleasure of talking with George more than a couple times now and he is a solid guy, he is going to be fun to work with and I know that when this is all said and one, up and running, pieces are on the move that you all will be very happy! Thanks again you all for your enthusiasm to what little role Ill play in all this!
 

rweed

Active Member
You can burn stuff in the VapCap, but I would suggest you don't. The resin will plug the screen and if you use the VapCap correctly, there won't be anything worth anything left anyway. So far everyone that has used it tells me when they smoke what's left after 4-5 cycles in the VapCap, it does nothing for them.
On a more interesting note, I am working with a lab in Colorado right now to do dome scientific studies to confirm efficiency and effectiveness. I hope to have those results before the cannabis cup.

Thanks,

George

So does that mean no AVB or will those results come out with the lab tests?
 

VapCap

Well-Known Member
Manufacturer
So does that mean no AVB or will those results come out with the lab tests?

I am hoping to illustrate with the lab tests that AVB out of the VapCap is essentially incense. Still smells kinda like it when you burn it, but it don't do anything but smell. This is because of the design of the VapCap and its ability to very effectively and efficiently extract a very "high" percentage of the active and desirable compounds from the sample. But the lab results will show.

does that perk also come with a stem from Ed???

I plan on including the Ed's TnT stem with the Titanium VapCap. I just haven't figured out a way to describe it on the campaign.

Thanks again everyone for the support!

George
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I am hoping to illustrate with the lab tests that AVB out of the VapCap is essentially incense. Still smells kinda like it when you burn it, but it don't do anything but smell. This is because of the design of the VapCap and its ability to very effectively and efficiently extract a very "high" percentage of the active and desirable compounds from the sample. But the lab results will show.



I plan on including the Ed's TnT stem with the Titanium VapCap. I just haven't figured out a way to describe it on the campaign.

Thanks again everyone for the support!

George

How about just titanium/wood special case?

Describing the different styles is tought though...
 

Ed's TnT

Woodsman
Manufacturer
At this point it is my plan for all of the titanium special cases to be a titanium end VapCap with Ed's stem. We will just need to figure out the variety and styles we're going to offer.

George

Only the finest, no half ass'n it, making a statement with top notch high quality from end to end is the only way to go in my book! Titanium and the words finest most dense wood species, there's no other choice, top shelf pieces with no substitutions! It's F'n golden as Blagojevich would say!
 

hoyo77

Well-Known Member
How about "Ditch the glass, add some class with the Vapcap Titanium/ Ed's Wooden Stem Combo" works for me!
Only the finest, no half ass'n it, making a statement with top notch high quality from end to end is the only way to go in my book! Titanium and the words finest most dense wood species, there's no other choice, top shelf pieces with no substitutions! It's F'n golden as Blagojevich would say!
"Titanium Vapcap Tricked out by Ed"
 

NickDlow

Log Hog
I am hoping to illustrate with the lab tests that AVB out of the VapCap is essentially incense. Still smells kinda like it when you burn it, but it don't do anything but smell. This is because of the design of the VapCap and its ability to very effectively and efficiently extract a very "high" percentage of the active and desirable compounds from the sample. But the lab results will show.



I plan on including the Ed's TnT stem with the Titanium VapCap. I just haven't figured out a way to describe it on the campaign.

Thanks again everyone for the support!

George

"This will give you wood!"
 
Top Bottom