jambandphan03

in flavor country
I agree, I spin one direction and also avoid heating past the click, hell I've nearly burned a load waiting to hear the click, just from heating it too low on the cap. I guess it's a personal preference, and maybe there is a little variance in how consistent the click is from one unit to the next. I know if I heat my glass unit the way I heat the M it would burn for sure, since the heat conduction is completely different with the glass model.

On a side note, I had to take a break from melting glass for a bit, because my left hand started having some arthritic issues, and I was having a hard time spinning glass with my left hand. Since getting the DV, and spinning it regularly with my left hand a few seconds at a time through out the day, it has slowly strengthened the weak muscles and is giving me more range of motion. Like PT for my hand while I medicate :) I'm getting my grip back, so I am going to start picking up glass again soon. It was a bummer to have to take a break. Now I'm just trying to get my head back in the game... maybe a custom DV stem is in order.
 

WakeAndVape

VapeLife X
You wouldn't be able to bring the torch right ..? Would you just use a lighter? Is the soot that would build on the cap from a lighter cleanable? Considering doing this when I go to Oregon ... idk which of my vapes is easiest to travel with ... solo 2, GH ... hmm
you could bring your own torch, i would just carry a cigar a justification.

also you can usually find a torch lighter wherever you travel for about $7-$10.

the reason i didn't advise is because i believe the OP was traveling internationally and i'm not too keen on their lighter policy...as long as its "allowed" you should be fine.

you can use a Bic and the soot SHOULD come off, but a torch is much more precise and better overall by nature.

@phattpiggie that is a lovely stem (as usual)! glad you found your cap too...i'm definitely starting to believe in the magic and i'm a natural skeptic
Those magnets are only 3lbs of pull force, something with 10lbs of pull force should be more than enough to pull the cap off. Like this one https://www.kjmagnetics.com/proddetail.asp?prod=DC6DIA

I will order those and a cube.
just for science's sake...the magnet i have that works has a 3 pound force as well and does pull the cap off the majority of the time and is still easy to free the cap from the magnet...

has anyone tried 10LB force magnets to confirm their 'smoothness of function'?

@PeteSeattle keep it up!
 

DirtyD

Well-Known Member
last night was using my omni and after a while of chilling, I go to grab it and notice the cap is missing.

I empty my pockets...no cap.
I look in the grass with a flash light...no cap
I get home empty pockets, check again...no cap
wake up this morning, come to terms my shit may be gone.
go back to my friends yard to search in the daylight...no cap.

go to bank to a make deposit, my friend (different friend btw) points at something on the floor by my foot...its the fucking CAP...i don't know how the universe worked that one out, but I was happy it did!

I was devastated at the thought of an incomplete VC
I'll make sure I throw it back in the tube faithfully now.
Happenef to me. Lost cap after 2 weeks of
Hi all,

Just sharing a little experiment in clear glass ...

Full_Size_Render.jpg


... inspired by the built in mouthpiece of the M. Needs refinement. I want the mouth piece almost the same profile as the M. Call it ... the G?

@OldCombustor i use these which are similar
https://wwwolor-Coded-TainerTop-Closures-Collthhgtgp.amazon.com/Fisherbrand-Color-Coded-TainerTop-Closures-Coll
I had a feeling I was supposed to but that lack of air flow is interesting. Feels like I am sucking a golf ball through a garden hose

Modnote: Posts merged

So so sorry. Above post is cuz I don't really know how to work this thing. Forgive a stoned old man. As y'all were.. D.
 
Last edited by a moderator:

little maggie

Well-Known Member
Purchase confusion:
I have some extra bodies. It looks like it would actually be less money to buy a glass vapcap s or tiglassy than to buy a ti tip and cap. Am I missing something?
 

jambandphan03

in flavor country
speaking of using a bic to heat the DV, I was curious, but didn't want to get soot all over my cap, and I remembered a previous post about somebody using a candle, suspending the DV a few inches over the flame, so I tried it out, using a bic, I just made sure there was about an inch of air between the tip of the flame and the cap, and I didn't get any soot. It just took a few more seconds to click than I am used to with a torch. I didn't time it out, but repeated the process a few times over getting decent amounts of vapor between clicks. So it is possible to use yellow flame and not get soot all over the cap, just keep the cap out of the flame.
 

Vapor_Eyes

taste buds
... something like these?
IMG_8952.jpg
Beautiful work @PeteSeattle!


or you can get plastic doob tubes for a dollar. try delta3dstudios.com

Agreed with the doob tubes . If I'm not carrying my dynastash , I have a doob tube !!

I use doob tubes when I'm not using my Dynastash. The doob tube caps are larger than VapCap tips. That means you can stuff your VapCap into the doob tube cap to fill it, like a mini Dynastash.

Turn your doob tube upside down and shake it to fill the cap, then turn it horizontal and carefully open it up and you will have a cap full of material. It's harder to explain the process than it is to actually do it. Once the doob tube cap is filled just pack your VapCap tip in there to fill it, a twisting motion can help.
 

BlazeDis

Well-Known Member
Does anyone know the dimensions of those doob tubes would get one but shipping to U.K. is about $15 !!!
Should be able to source an alternative on eBay etc
 
BlazeDis,
  • Like
Reactions: Kermitt

Doktor Dub

Well-Known Member
I think i can t stand it anymore and have to order a Vapcap to become a part of this thread and to know what all the Fuss is about.... :-)

I never tried a Vapcap, i like the Vapman and also own a Mighty, GH and Volcano.

Should i get the M to test the Waters or should i just say f... it, order an Omni TI and be done with it?

I am ordering from Europe and would order from a retailer btw...

Surely nobody can answer this to me, but i guess you girls and guys are quite good in talking me into spending some money? Anything else to think of?
 

Hogni

Honi soit qui mal y pense
Hi Doktor Dub, give the M a try first! It's good enough to explore how this stuff is working. After your learning courve you will love it. And the M is the best VC on the go. Not too expensive in case of lost and durable under all circumstances - you will survive yourself ;-)

Hi all,

Just sharing a little experiment in clear glass ...

Full_Size_Render.jpg


... inspired by the built in mouthpiece of the M. Needs refinement. I want the mouth piece almost the same profile as the M. Call it ... the G?

@OldCombustor i use these which are similar
https://www.amazon.com/Fisherbrand-...782228&sr=8-8&keywords=blood+collection+tubes
The price I think is for a bulk supply.

Maybe a better deal?
https://www.amazon.com/Shandilya-La...1494783053&sr=8-46&keywords=Blood+glass+tubes

With...
https://www.amazon.com/Globe-Scient...1494783120&sr=8-41&keywords=Blood+glass+tubes

... beat me to it @needalift

Pete, very nice pieces! Would look for titanium condenser and anodize them by heat to multi colours. Think your glass stem combined with such a couloured condenser would give a beautiful pairing.

Do you intent to produce your stems in a larger amount for sale?
 

DorianGray

Well-Known Member
I think i can t stand it anymore and have to order a Vapcap to become a part of this thread and to know what all the Fuss is about.... :-)

I never tried a Vapcap, i like the Vapman and also own a Mighty, GH and Volcano.

Should i get the M to test the Waters or should i just say f... it, order an Omni TI and be done with it?

I am ordering from Europe and would order from a retailer btw...

Surely nobody can answer this to me, but i guess you girls and guys are quite good in talking me into spending some money? Anything else to think of?

Welcome to the family! Order the Omni Ti and indulge in design excellence :clap:

You should probably consider that the vapcap has the smallest chamber out of your device arsenal. If that's ok, then go of it! :)
 

flotntoke

thoroughly vaped
I had a feeling I was supposed to but that lack of air flow is interesting. Feels like I am sucking a golf ball through a garden hose

Get used to it a little more and feather as necessary. It really depends on what you're looking for and how you want to use your VC. Very versatile! I like mine closed for the most part, but like to clear it out with port open whether dry or through water. And, this even changes depending on time of day, what else I have going on, and how heavy of a buzz I'm going for.

I found a downside to the vapcap last night. Well a downside to vapcap and alcohol. :ko:

I bought these pants on Friday, first time i wore them last night. :doh:

nDQ25bE.jpg




GT324

Gotta watch out for that. Nylon blends burn a lot faster than jeans! Almost did the same a couple weeks ago, but at last minute remembered I wasn't wearing denim. Something for all of us to keep in mind as weather gets warmer. Thanks for sharing so I can hopefully learn from your lesson.
 

PeteSeattle

Well-Known Member
@needalift @DirtyD @WakeAndVape and @Hogni thanks for the compliments.

Pete, very nice pieces! Would look for titanium condenser and anodize them by heat to multi colours. Think your glass stem combined with such a couloured condenser would give a beautiful pairing.

Do you intent to produce your stems in a larger amount for sale?

Hogni ... I've never thought about that. A really must try challenge. And yes, I'm trying to make as many of these as possible. My kiln is not that big so I make small batches at a time. Keep a look out in the DIY section where I will post a thread about it.
 
Last edited:

Hogni

Honi soit qui mal y pense
Dok..wait until mid of June. Probably Verdampftnochmal will have a 20% discount for 14 days up from the Mary Jane Canna Convention in Berlin. At least last year they did so.
Would be good enough for the Herborizer Ti and some VC ;)

Pete....would be nice if you would put then the link to your thread in your signature!
 

tblast

Well-Known Member
I love my OG glass vapcap, but I got the M 3 days ago and I've having a weird issue. Don't get me wrong, it works tremendously, flavor way better than on the OG, but it makes me cough a LOT. Maybe there's a reason I'm overlooking, i really don't know, but it just gives me a really uncomfortable tickle in my throat, even the low temp hits in the beginning of the cycle. Anyone else had this issue?
 

Doktor Dub

Well-Known Member
I love my OG glass vapcap, but I got the M 3 days ago and I've having a weird issue. Don't get me wrong, it works tremendously, flavor way better than on the OG, but it makes me cough a LOT. Maybe there's a reason I'm overlooking, i really don't know, but it just gives me a really uncomfortable tickle in my throat, even the low temp hits in the beginning of the cycle. Anyone else had this issue?

Did you clean your new Vapcap before useing? This should be done with every new Vape, preferable with ISO.

Good luck & enjoy your new toy
 

HighlyEducatedScholar

Student of Vapor
I love my OG glass vapcap, but I got the M 3 days ago and I've having a weird issue. Don't get me wrong, it works tremendously, flavor way better than on the OG, but it makes me cough a LOT. Maybe there's a reason I'm overlooking, i really don't know, but it just gives me a really uncomfortable tickle in my throat, even the low temp hits in the beginning of the cycle. Anyone else had this issue?

this is one of the few cons that i have experienced with my M. personally, i found the M to be a bit harsh and generally like to pair with a small water piece. it's definitely manageable to hit dry for me but to get those really big hits i definitely prefer it to be paired with water. despite this, i still use my M basically daiy, with and without water filtration.
 
Had my M for a week and I'm absolutely loving it. My extreme Q hasn't been turned on in days. It reminds me so much of smoking a joint. The only trouble I've found is its so easy to use my consumption has slightly gone up as I want to use it as much as possible!

Has anyone thought of or got any experience with paint infilling? I've seen it done many times to personalise golf clubs but wondered if it would work on the M and what sort of paint would be required for that little touch of individuality!
 

jds

Well-Known Member
Had my M for a week and I'm absolutely loving it. My extreme Q hasn't been turned on in days. It reminds me so much of smoking a joint. The only trouble I've found is its so easy to use my consumption has slightly gone up as I want to use it as much as possible!

Has anyone thought of or got any experience with paint infilling? I've seen it done many times to personalise golf clubs but wondered if it would work on the M and what sort of paint would be required for that little touch of individuality!

The M and Omnivap made me sell all my other vapes. I never used them anymore.
 
Top Bottom