Dynavap VapCap

[vapenerd]

Daaaaamn, I like it! What kind of battery life is that thing rockin?

I don't know if it came fully charged and I didn't count the clicks. So I can't tell you how good the battery life is. I'll have to wait till I get the new charger. The last shipping took 12 days so ask me again in two weeks.

Can you post a pic with in your hand? Do have a portside mini? I'd like to see a pic with it next to it.

I do not have a portside mini. I wish I had a better cam but sure, there you go:

 

[stark1]

Oh yeah, and he mentioned that the next run of pieces, I believe will also be able to accommodate an Omni condenser!


Happy Vaping!

I am confused. My Beta seems to mate with an Omni condenser?



upload an image

 

[thejackalsmark]

I am confused. My Beta seems to mate with an Omni condenser?



upload an image

This is from the description on ebay...

I believe he said he needed/wanted the stem like 1mm longer to correct that.

@RogueGuy is that correct?

Happy Vaping!

 

[stark1]

Works poor moi?

Perhaps the Beta was a little/silly 1mm spot “on”...


PS Of course MacGyver would pull the tip a silly/little mm up so every-thing would click on.

Lock & Load.

 

[nickdanger]

So Fantasmo Express it is right now, very Sativa in effects. Have a very nice evening all you faithful merry vapcappers! And here is to many successful harvests and frutis of labour right now and soon to come.

@Alexis The Mephisto genetics are very nice, aren't they? Love them with my Vapcaps!

 

[someTooL]

Induction heating...take my money now

Butane heating is what kept my away (fear of burning myself and I would be going through a lot of butane lol) but after remembering the old days of my dugout and bat it was a no brainer.

So far I’ve seen pipes and Lucid. Not really interested in battery powered or a fancy design (although that puzzle one was quite cool) and plug in suits my at home needs. Both makers seem to have good standings in the community, any others I should view (DM me if this a taboo topic)?

I actually tried to be added to a waitlisting yesterday through Dynavap but was told no such thing and just check back.

 

[Alexis]

@Alexis The Mephisto genetics are very nice, aren't they? Love them with my Vapcaps!

Yes they are top notch, arguably if not surely the most potent of all Autoflowers out there currently, pushing well over 20% THC in many cases.

I chose Mephisto this time specifically for the quality. I was expecting and prepared for a lower yield as Mephisto explicitly state that they have always been focused on quality rather than quantity.

This certainly appeared to be the case and we we had a moderate haul of 250g from 5 Autos this time so not too bad, compared to the Dutch Passion monsters last summer with 875 grams from 8.

We are pleased though. This stuff is messing me up lol not kidding. It's amazing how little I am using all of a sudden in contrast.

Hope today is going well for you all. I do love this thread, sorry I don't come here very often but when I do I always feel so warmly accepted and accomodated by so many sincere, good and caring people. You are a very friendly and fun bunch, thank you everyone.

 

[stark1]

@Alexis, hope you are well, and surfing thru your insufferable pain, mon ami.

If 20% THC works for you, all is well and good.

Wait till you get a hold of carts with 97% THC!

Northern lights Dart.
(Misplaced my other Trainwreck Dart after a few puffs. Somewhere.)

 

[RogueGuy]

@stark1 @thejackalsmark the omni will fit and so will a Ti tip but the condenser goes in too far IMO and blocks off the airflow from the carb. A few might be long enough and @danielj is making me some small spavers to resolve the issue for people who want to run Omni and Ti and on the next batch they should be the proper length.

 

[warren0728]

Induction heating...take my money now
So far I’ve seen pipes and Lucid. Not really interested in battery powered or a fancy design (although that puzzle one was quite cool) and plug in suits my at home needs. Both makers seem to have good standings in the community, any others I should view (DM me if this a taboo topic)?

i have a @Pipes caldron and love it ... small ... simple ... discreet

i'm probably gonna get a portside mini from him too although honestly i would rather use 18650's since i have a bunch of them ... but i'm sure i would like the portside mini as much as my caldron.

 

[Xclerk]

@stark1 @thejackalsmark the omni will fit and so will a Ti tip but the condenser goes in too far IMO and blocks off the airflow from the carb. A few might be long enough and @danielj is making me some small spavers to resolve the issue for people who want to run Omni and Ti and on the next batch they should be the proper length.

Very cool idea for the spacers. Excited to see the final outcome

 

[lookhigh]

i have a @Pipes caldron and love it ... small ... simple ... discreet

i'm probably gonna get a portside mini from him too although honestly i would rather use 18650's since i have a bunch of them ... but i'm sure i would like the portside mini as much as my caldron.

There is also the fluxer.

 

[danielj]

TRWW 2mmxl Spacer

Adding 2 parts to adjust condenser tip placement
1- acetal spacer
2- 007 x ring

The spacer goes behing the spinning mp
The 007 x ring goes behind the standard 008 x ring. The mp spins as normal, and the condenser is adjusted for the glass stem length. The stems will have a slight variance, one stem to another - Dave is going to provide a list of stem lengths so that I can get everything as close to spec as necessary.

As this is a modified version of the classic DV glass OG... I thought it important to provide a fix for this first batch. IMO, when RWW gets his glassmaker up to spec, this stem should become the inheritor to the standard DV OG

 

[lookhigh]

A 007 ring you say. License to vape, i like my weed shredded not crushed.

 

[danielj]

A 007 ring you say. License to vape, i like my weed shredded not crushed.

Acapulco "Goldfinger"
To Sativa, with love
carry on

 

[stark1]

The Omni condenser is adjustable, is it not.

In the worst case, the mouthpiece can be pulled out one O-ring at a time for airflow. Or the tip
Can be pulled out a bit.

Ideally, the stem can be cut of the proper length, eliminating the need for spavers, or the need
To get down on one’s knees looking for the little buggers.

Ah, Lord! Spare me the need of reading glasses!

 

[danielj]

The Omni condenser is adjustable, is it not.

In the worst case, the mouthpiece can be pulled out one O-ring at a time for airflow. Or the tip
Can be pulled out a bit.

Ideally, the stem can be cut of the proper length, eliminating the need for spavers, or the need
To get down on one’s knees looking for the little buggers.

Ah, Lord! Spare me the need of reading glasses!

@stark1

totally... for the omni condenser, just pull abit
For spinning mp, the spacer is best option
yes, hopfully the glassmaker has the tooling to blow, cut to length, and fire polish.

Hey, Im legally blind...its' all " little buggers" to me!

 

[Jill NYC]

Ah, Lord! Spare me the need of reading glasses!

Alas no one is spared. It is only a matter of time...
Embrace that which we cannot avoid.

 

[stark1]

Thank you, Jill! You are so helpful, sometimes.

Praise be ye who has the edge.

 

[MasonJar]

Ddavemods: Temporary Suspension of Business Activities

I checked ddavemods website after reading this news on reddit and indeed the home page displays the message above. I had plans of getting additional Water Wand V2s once they became available but now I guess I have to wait longer.

 

[Verax]

Ddavemods: Temporary Suspension of Business Activities

I checked ddavemods website after reading this news on reddit and indeed the home page displays the message above. I had plans of getting additional Water Wand V2s once they became available but now I guess I have to wait longer.

Yeah, I had an open order I had with him just get cancelled this AM.

 

[Baron23]

Ddavemods: Temporary Suspension of Business Activities

I checked ddavemods website after reading this news on reddit and indeed the home page displays the message above. I had plans of getting additional Water Wand V2s once they became available but now I guess I have to wait longer.

@DDave

I read the blurb on his home page then went to his blog page which has way more details.

What an ugly story and yes, IMO DHL sucks.

I'm sorry to hear this and hope Dave is able to return to business quickly.

 

[Hackerman]

@DDave

...then went to his blog page which has way more details.

Do you have a link to his blog page?

 

[Baron23]

Do you have a link to his blog page?

Its from a link on his home page called Announcements

https://www.ddavemods.com/announcements

 

[GetLeft]

I'm sorry to hear this and hope Dave is able to return to business quickly.

Me too. I ordered an item yesterday and didn’t see that same message, just the gripe about dhl. Wondered why I hadn’t heard from him since he’s typically right back at you with answers to your questions.