Skunkport

Well-Known Member
Price up what you want on each website and use the cheapest total ;-)

Do you use bongs? The wood body fits into a bong, the metal ones don't.

I've seen different opinions on the Omni versions - some prefer a manual carb hole they can cover or not as they want, it's more adjustable on the fly. The Omni is good if you like it set to a certain draw and don't change it.
Personally, I haven't tried the Omni and might not bother, I tend to cover and uncover my carb hole as I take a drag, depending how it feels on my throat. The Omni also means you can't use a spinning mouthpiece, and that looks like it'd be easier to heat.

I haven't actually used anything except the M myself though, I only got this about 2 weeks ago, most of this is from reading this thread.
 

LesPlenty

Well-Known Member
Company Rep
One of my favorite things about no longer smoking is that I no longer stink of smoke
My wife loves that I don`t stink of smoke anymore. I can`t believe how bad smokers do smell, now that I can smell again.

Just got am M starter pack for a friend (stinky smoker) and an extra S/S tip for my 14mm to 14mm GonG so I don`t have to keep swapping over. I had to get the 2 lighter kit to get the Virtigo 2 flame zippo knock off for him as it was a big deal to him to have that lighter. I will keep one of the single flames for myself I suppose, they do look pretty crappy though.:)
 

JamesTiberiousKirk

Well-Known Member
I purchased an Ti omni XL, but converted it to an Ti XLS by using an XL condenser and a spinning TI mouthpiece. I love it. I also bought an nnnavong XLS dark Wood, but since I only use it for glass use, I replaced the condenser with a standard condenser, and use the XL condenser and spinning mouthpiece with my M18.. Everyone has their preference in how they Lego their device(s).
 

LesPlenty

Well-Known Member
Company Rep
https://www.ebay.com.au/itm/18mm-To-14mm-Male-3styles-Expander-Reduce-Adapter-Connector-Clear-Glass-Lab/142122474174?ssPageName=STRK:MEBIDX:IT&var=441201669853&_trksid=p2060353.m1438.l2649
s-l64.jpg

asdf420, this is what I use, but they are out of stock:ugh:
Many others available, but may need different O-rings to fit well.
I would recommend DDaves glass stem over it as his will fit better (I use a fatter o-ring than standard)
https://www.ebay.com.au/itm/2-42MM-Translucent-Food-Grade-Silicone-O-Ring-Line-diameter-1-5mm/253514951499?ssPageName=STRK:MEBIDX:IT&var=552700309467&_trksid=p2060353.m2749.l2649
ID4mm, OD7mm
This is what I needed to make mine really sturdy, can jam on my de-bowler without the tip moving.
 

Summer

Long Island, NY
Already wondering if I’m going to wish I’d gotten an “m” and an Omni xl instead.

If your order hasn't shipped yet, you can log in & add to cart any additional items you want & it will ask if you want to add the add'l. items to your current order for shipping. If you have doubts about the omni & your order hasn't shipped just add in an xl condenser & a spinning mp. So even if you like the omni as is, you can turn your M into an XL w/ spin. mp.
 
Last edited:

Ricardo

Well-Known Member
F**k the World Cup! Watch Essendon v. North Melbourne in AFL (Australian Rules Football). Seriously, if you consider yourself a sports fan you have to give this sport a fair chance. And keep those loaded Vapcaps coming :peace:
 

-dab8-

Dyna-saur
If your order hasn't shipped yet, you can log in & add to cart any additional items you want & it will ask if you want to add the add'l. items to your current order for shipping. If you have doubts about the omni & your order hasn't shipped just add in an xl condenser & a spinning mp. So even if you like the omni as is, you can turn your M into an XL w/ spin. mp.
Wouldn’t I also need a longer body?
 
-dab8-,
  • Like
Reactions: Lady V

Summer

Long Island, NY
Oh, sorry @-dab8-, I just assumed you ordered an omni XL not a standard. Well, you still got options. You can use an XL condenser w/ a spinning mp in the M & then use the M condenser in the Omni body & then you would just need 1 more spinning mp.

Or you can order a spin. mp & use the M condenser w/ it in the omni & then put the omni mp only in a condenserless M.

BTW, a long body is called a stem. Body 45mm; Stem 62mm
 

-dab8-

Dyna-saur
Oh, sorry @-dab8-, I just assumed you ordered an omni XL not a standard. Well, you still got options. You can use an XL condenser w/ a spinning mp in the M & then use the M condenser in the Omni body & then you would just need 1 more spinning mp.

Or you can order a spin. mp & use the M condenser w/ it in the omni & then put the omni mp only in a condenserless M.

BTW, a long body is called a stem. Body 45mm; Stem 62mm
Ahhhh, thanks. That makes way more sense.
 

needalift

Well-Known Member
Big ups to @VapCap , @Aezhenn , and @Pipes for all having a hand in my new favorite vapcap combo ...
G0EfWIi.jpg

Vapcap = OG 7-fin tip and cap
Pipes = Portside Mini
Both of the above = Perfection
But again I have to say how impressed I am with the VC pipe that @Aezhenn made for me . The draw on this thing is so smooth that it feels like you aren’t getting a real pull , but the clouds say different . Thanks again to each of you that made this combo possible .
I’m trying out tinypic for the first time , hopefully it works. This is the pic I shouted out @Aezhenn , @VapCap , and @Pipes with . I hope people can see it !!
kapfgz.jpg
 

Winegums

I make things from wood
Accessory Maker
F**k the World Cup! Watch Essendon v. North Melbourne in AFL (Australian Rules Football). Seriously, if you consider yourself a sports fan you have to give this sport a fair chance. And keep those loaded Vapcaps coming :peace:
I have to agree, there are far better sports to watch. I can’t stand the unsportsman like behaviour of soccer players. They fall like a house of cards then writhe on the ground like they have a mortal wound. Then when they review footage they find that no one even touched the guy and he dived all on his own. Seriously the whole lot of them should be ashamed to call themselves athletes. The funniest part is when they do the whole act then find out the ref didn’t notice. They get up awfully fast for someone acting like their leg is broken.

Getting back on topic, I love a good vapcap session before settling in with my Dad to watch some sports. It’s the perfect vape to hit during the commercial breaks since it takes so little time to heat up.
 

LesPlenty

Well-Known Member
Company Rep
If your order hasn't shipped yet, you can log in & add to cart any additional items you want & it will ask if you want to add the add'l. items to your current order for shipping
I just went back onto dynavap just to see if I could add still to see if my stuff had shipped, it hadn`t.:shrug: So I took your advice and added a spinning titanium mouthpiece and a titanium XL condenser to try on my M18 :)(I hope I ordered the right bits?)
 

IntoTheVoid

Pride Goeth Before A Fall
I’m a bit confused how some folks are able to get 7 or even 8 heating cycles out of their VCs. I dare not go past 4 and the abv is black as night. Am I doing something wrong? I keep my bud at 62% humidity with a Boveda pack. Am I heating it too low on the cap? Are you guys only heating near the tip? I use a single flame torch and typically heat on the lower 3rd of the cap, and at the base for the last hit. I get the same results on my M and my Omni, so it’s not a “SS vs Ti” thing.
 

needalift

Well-Known Member
I’m a bit confused how some folks are able to get 7 or even 8 heating cycles out of their VCs. I dare not go past 4 and the abv is black as night. Am I doing something wrong? I keep my bud at 62% humidity with a Boveda pack. Am I heating it too low on the cap? Are you guys only heating near the tip? I use a single flame torch and typically heat on the lower 3rd of the cap, and at the base for the last hit. I get the same results on my M and my Omni, so it’s not a “SS vs Ti” thing.
I always get less cycles ( much quicker extraction ) with a single torch . Usin a triple or quad always allows me for more heat cycles . I get 4-5 out of a the smallest setting on the ti tip
 

Smokey McVape

Well-Known Member
Guys, I need help. I have Arizer Solo II and Plenty. I enjoy using both of them, I get a nice high from both, but once in a couple of weeks I smoke from a bong and each time I notice that a single bong rip gets me higher than vaping the same amount of bud. It's a more energetic and intense high when I smoke. But I really don't want to return to smoking. SO there are tons of posts here about Vapcap M and how it's really close to smoking in terms of effects. So can someone who's an owner of both Solo and Vapcap (or Plenty + Vapcap) tell me if the Vapcap is worth purchasing for me?
@malkan - I'm an ex-smoker and I own Arizer Solo 1&2, Arizer Air and a Volcano. I like my Arizer vapes BUT like you I was still burning weed via a bong to get the high I liked.
Then I got a vapcap and EVERYTHING changed. Within 5 days of getting my vapcap I stopped using all other devices AND stopped combusting completely.
The vapcap with mouth to lung pulls is the closest experience to smoking you can get and may just be the ticket for you to give up combustion. I also have to agree with @cybrguy - the high you and I enjoyed from smoking IS 100% down to the poisonous chemicals produced from combustion - you will find out yourself after a few days with a vapcap and no combustion.
I also suggest that you treat people trying to help you with respect. Nobody likes a keyboard tough guy.
 
Last edited:

IntoTheVoid

Pride Goeth Before A Fall
@malkan - I'm an ex-smoker and I own Arizer Solo 1&2, Arizer Air and a Volcano. I like my Arizer vapes BUT like you I was still burning weed via a bong to get the high I liked.
Then I got a vapcap and EVERYTHING changed. Within 5 days of getting my vapcap I stopped using all other devices AND stopped combusting completely.
The vapcap with mouth to lung pulls is the closest experience to smoking you can get and may just be the ticket for you to give up combustion. I also have to agree with @cybrguy - the high you and I enjoyed from smoking IS 100% down to the poisonous chemicals produced from combustion - you will find out yourself after a few days with a vapcap and no combustion.
I also suggest that you treat people trying to help you with respect. Nobody likes a keyboard tough guy.



Exactly, many people don’t realize the high you get from smoking also has to do with the fact that you’re inhaling smoke and your lungs are oxygen deficient. You can take all the good that weed has in it and just go stand in the doorway of a burning building and take a deep breath and get that same effect. THC and other goodness takes a few minutes to set in. You’re already dizzy and falsely lifted from inhaling smoke before the good stuf creeps in. That said, the Dynavap is closest I have come to smoking. It gets me the highest but still can’t get that last little bit due to not combusting. Honestly I don’t want that last little bit if it means hurting myself with smoke
 

kushkush

happy camper....
I’m a bit confused how some folks are able to get 7 or even 8 heating cycles out of their VCs. I dare not go past 4 and the abv is black as night. Am I doing something wrong? I keep my bud at 62% humidity with a Boveda pack. Am I heating it too low on the cap? Are you guys only heating near the tip? I use a single flame torch and typically heat on the lower 3rd of the cap, and at the base for the last hit. I get the same results on my M and my Omni, so it’s not a “SS vs Ti” thing.

As likely the ‘least of all’ experienced here I was surprised to get 7 heating cycles from my NonaVonG. All I can think is that I always respect the click, which with this NonaVonG clicks twice...a light click and then a loud click about 2 seconds later. It’s the loud 2nd click that I respect. The bud after 7 heatings looked very much the same as after 4 sessions. But in a whole different session it “looked” combusted when I had added a little concentrate to the bud after only 4 sessions, but I don’t think it was. The tiny amount of concentrate also made the bud stick together so it came out of the chamber in one tiny little blob instead of as dry bud.

I’ve only combusted once and that was after letting it heat about 2 seconds past the click, on purpose. The ‘vapor’ swirled in my Vapor Lung, which looked to me like smoke, not vapor, so I didn’t inhale it. And the bud was black. Since I got @Pipes heater some time ago, that’s all I ever use to heat the bud. I hope this helps. I think I’ll try 7 cycles with my M17 some time soon and see what happens. :)


:2c:
 
Last edited:

beyond6strings

Just another traveller in the Cannaverse
Too lazy to go back to see who doesn't clean their new vapes, and thought that was cool, but this is something of a sore spot for me towards vape companies in generaL, not just towards Dynavap.

I'm a pretty smart guy and do my research, but nowhere did I hear I should clean my vapes either by doing a burn-off, yeah the dude with the Davinci, bad move, shoulda done a burn-off, or washing and rinsing them depending on what type of vape you have.

But unless you are really clued into vaporizer review sites this isn't common knowledge. I'm sure there are thousands of people who use their vapes without cleaning them because they're ignorant, not stupid or lazy.

And it fucking should be common knowledge. I'm guessing that lawyers are keeping them from saying anything in their literature. But so far, I've not found anything in print about cleaning vapes before using them. WFT!? I can tell you that inhaling machine oil sucks dead donkey dicks.

These are going out to people who are using them for medical reasons. I'm OK with having to clean my vapes before using them, but for fucks sake-tell me about it. In big red letters. AND EXPLICIT INSTRUCTIONS ON HOW TO BEST DO IT.

Rant over
 
Top Bottom