Cheap High Quality Bubbler

Monsoon

Well-Known Member

Erwin

Well-Known Member
Yingmin, without a doubt. The key difference is that Yingmin's percs are welded to the bottom of the can, which means they're closed off and the vapor is going to be channeled entirely through the slits. With Stevens, the bottoms of the arms on the percs are wide open, which means that the slits will fire less and the whole piece will have a much chuggier feel, which is much less like an actual Toro.


look at the air leak between the joint and first perc...booo!
Yeah, that's becoming an increasingly widespread problem for me with DHgate glass... That spot seems to get overlooked a lot. There was a huge leak right there in the recycler I just posted about, so big that nothing made it through to the perc.

I also had that problem with a micro I bought a while back, which come to think of it I totally forgot to mention on here. It was this guy, from seller Wintergirl:

http://www.dhgate.com/product/hot-i...r/214756798.html#myaccount_orderdetail-1-null
Hot%20Item%20Hand%20Size%205.5%22%20Mini%20Bubbler%20Glass%20Ash%20Catcher%20Inline%20Percolator%20Water%20Pipe%20Oil%20Rig%20Bong%20Very%20Convenience%20WP027.jpg


Same problem. Huge round hole where the perc is welded to the can, and all the vapor goes through there instead of the perc. I got a replacement from them which has the exact same problem too, and I'm currently waiting to hear back from them about getting a third...

Anyone else had this problem before or is it just me? I feel like I haven't heard too many other people mention it... :shrug:
 
don't see this after browsing a few pages back, so I'll just leave this here:
http://www.dhgate.com/product/new-a...circulating/239160389.html#s2-2-1a|4080593269
similar:
http://www.dhgate.com/product/new-a...irculating/239164204.html#s1-18-1a|2994844977

^^look interesting, though I can't imagine a recycler that small functions very well.

This also looks interesting, sort of a combo of aqua bubbler and assassin neck tie?
http://www.dhgate.com/product/new-a...circulating/239163628.html#s2-6-1a|4080593269

some new shapes for bubbbler/ash catcher globe tops:
https://www.usvapes.com/atomizers/wax-and-dry-herb-tanks/igolla-glass-bubbler.html
https://www.usvapes.com/atomizers/wax-and-dry-herb-tanks/igolla-glass-bubbler-1859.html

I can't find all of those shapes on dhgate, but its often a search term hurdle -- just gotta find the right combination of words and presto there it is.
 
Last edited:
ragnorokk,
  • Like
Reactions: VJJJV

420boi

Well-Known Member
whats everyone's favorite recycler from dhgate? im using a dcycler right now, any other ones function as well?
 
420boi,

420boi

Well-Known Member
So funny-- I just found logjam on insta and fell in love with this design. Its a pretty decent copy.
the small mutant eggs on dabstore for 435 aint even bad, they look soooo sick

also kinda not related to bubblers, but http://www.dhgate.com/store/product/3mm-thick-quartz-banger-nail-female18mm-ground/233812819.html not sure if this is a mistake but for this hymanquartz 3mm banger, there is free shipping via epacket to canada. none of the other items have it.

might need to snag a few for my 16mm enail and hope they dont notice (?)
 
Last edited:

Zufi Raj

Master Zufi
I am just about to buy one of StevenLMZ69 's pieces and am unsure whether to choose the FC 707 or the FC 1000. They seem to be the same apart from the mouthpiece being either side mounted or top mounted. My thought is that the side mounted pieces are probably more delicate and easier to break. They both look quite beautiful and I am hoping that he has now got the quality control issues sorted out. Any thoughts to help me decide between the 2?
 
Last edited:
Zufi Raj,
I am just about to buy one of StevenLMZ69 's pieces and am unsure whether to choose the FC 707 or the FC 1000. They seem to be the same apart from the mouthpiece being either side mounted or top mounted. My thought is that the side mounted pieces are probably more delicate and easier to break. They both look quite beautiful and I a hoping that he has now got the quality control issues sorted out. Any thoughts to help me decide between the 2?
The side mounted piece cost more. I believe it's because no one has ordered the top mounted one. I ordered the side mounted one and he sent me the top mounted one.
Edit: I'm going to sale my top mounted one for less than i paid, just to get the side mounted one!
 
Cannabis Connoisseur,
  • Like
Reactions: Zufi Raj

Zufi Raj

Master Zufi
The side mounted piece cost more. I believe it's because no one has ordered the top mounted one. I ordered the side mounted one and he sent me the top mounted one.
Edit: I'm going to sale my top mounted one for less than i paid, just to get the side mounted one!

Did you try out the piece? I am sure that you could sell your piece for a profit! It looks so good and is much cheaper than other matrix pillars.
 
Zufi Raj,

Delta3DStudios

Well-Known Member
Accessory Maker
So if I wanted a daily workhorse, would the GB-194 fit the bill?

Also, what do you guys think of this for a 14.4?

Eh, I don't know if I'd do either of those for a daily workhorse. I'd go with something using less diffusion like the D020 or the GB-187 to start with

I feel like the GB-194 provides a LOT of diffusion which is unecessary for vaporizing (in my experience)
 

mixchu69

Well-Known Member
Eh, I don't know if I'd do either of those for a daily workhorse. I'd go with something using less diffusion like the D020 or the GB-187 to start with

I feel like the GB-194 provides a LOT of diffusion which is unecessary for vaporizing (in my experience)
Totally agree with Ratchett. I use the gb 194 for my enail. I have a lot of China glass (Fc 187, gb194, fc186, Cmen egg, cog egg, dcycler, Fc 710, Fc 711, and a few more) but have not found one with good flow but keeps flavor. I think I will buy the d020. I currently use my vapor brothers bubbler whenever I can (by far the best glass purchase I made) but it keeps all my vaporizers right next to my face.

Does anyone know if the d020 will work well with my minivap and lsv (both similar in shape), without it right next to my face? The price point def interests me.
 

MilkyMondays

Well-Known Member
People seem to like the CCG egg-- I believe the consensus is that this is one of the better larger eggs.
Just curious if anyone has this particular bubbler or similar d20 and use it was an ash catcher? I'm considering purchasing this one below and want to get an ash catcher to keep it cleaner but with it being smaller I'm not sure if it would tip over or not.

http://www.dhgate.com/store/product/d020-2-w-glass-water-smoking-pipe-with-two/197326134.htmlhtml

D020--2-W%20glass%20water%20smoking%20pipe%20with%20two%20disks%20two%20functions%20blue%20color.jpg
If you're dabbing this thing should be just fine-- maybe get a drop down. Otherwise if you're planning on combusting or vaping I'd recommend the stereo matrix from Steven or Yingman.

http://www.dhgate.com/store/product/glass-water-pipe-new-line-prec-glass-ash/184591702.html
Look at this terrible design. Super hilarious to see what it even does. You would think they would be getting better now that they know there are dedicated forum discussions :doh:
 
MilkyMondays,

Delta3DStudios

Well-Known Member
Accessory Maker
Just curious if anyone has this particular bubbler or similar d20 and use it was an ash catcher? I'm considering purchasing this one below and want to get an ash catcher to keep it cleaner but with it being smaller I'm not sure if it would tip over or not.

http://www.dhgate.com/store/product/d020-2-w-glass-water-smoking-pipe-with-two/197326134.htmlhtml

D020--2-W%20glass%20water%20smoking%20pipe%20with%20two%20disks%20two%20functions%20blue%20color.jpg

It's a male fitting, I hate male fittings so I gave mine away. But it actually worked very well with my Lotus vaporizer (I used a female to female and lifted that to carb the piece).

It is small, you'd want a small AC if anything, but with a Female to Female and an AC, it might get a bit awkward.

Not a bad piece, just no longer in my personal collection (no 14mm male bubblers for me, I hate em)

Does anyone know if the d020 will work well with my minivap and lsv (both similar in shape), without it right next to my face? The price point def interests me.

Lol, probably way too small for either of those vapes. I haven't tried my LSV with the D020, but it probably wouldn't work with the m2m, you'd probably need the official WPA so you could twist the LSV away from your face while your take a hit (I'll have to test later lol)
 
Delta3DStudios,
  • Like
Reactions: mixchu69

A1FBG

Active Member
I am just about to buy one of StevenLMZ69 's pieces and am unsure whether to choose the FC 707 or the FC 1000. They seem to be the same apart from the mouthpiece being either side mounted or top mounted. My thought is that the side mounted pieces are probably more delicate and easier to break. They both look quite beautiful and I am hoping that he has now got the quality control issues sorted out. Any thoughts to help me decide between the 2?

I don't own either but The pillar brings water all the way up the can so I'd say the bent mouth peice is a lot less likely to have water get in your mouth.
 

Deano

Well-Known Member
People seem to like the CCG egg-- I believe the consensus is that this is one of the better larger eggs.

If you're dabbing this thing should be just fine-- maybe get a drop down. Otherwise if you're planning on combusting or vaping I'd recommend the stereo matrix from Steven or Yingman.

Any reason you don't recommend it for dry flower? I like the more compact bubblers if they're functional.
 
Deano,

ChiefKeefe

Well-Known Member
The CCG egg is amazing for combusting flowers. I own many american flower tubes and china ones. CCG is super smooth. I recomend a better airflow slide then it comes with.. It is really smooth. But for the size rips I take i wouldnt say it takes the cake over the fc-186 with an SG 4 hole slide.

Not to flaunt and say trust my opinion over others.. But ive owned LOTS of american glass over the past 5 years, and a lot of china in the last year. The CCG is great for combusting flowers..

But fuck that, this is indeed fuck combustion afterall..
 
ChiefKeefe,
  • Like
Reactions: 063_XOBX

Frederick McGuire

Aggressively Loungey
I am just about to buy one of StevenLMZ69 's pieces and am unsure whether to choose the FC 707 or the FC 1000. They seem to be the same apart from the mouthpiece being either side mounted or top mounted. My thought is that the side mounted pieces are probably more delicate and easier to break. They both look quite beautiful and I am hoping that he has now got the quality control issues sorted out. Any thoughts to help me decide between the 2?
The only person I know of who has ended up with the tube style FC-707 is @Cannabis Connoisseur (side note - to anyone who was pushing for the tube style neck, as I know there was a lot of back and forth about it, where are the reviews?
It's kinda frustrating that people were pushing for a design and then just noped out of purchasing it...).

As he said, He didn't order the 707 tube version, he was sent it in error.

Basically, it seems like the tube version has a slight splashback issue, which I have not experienced with the bubbler style FC-1000.

The bubbler style gives a nice view of the top of the can so you can see vapor forming, I have no idea what the view is like for the 707.

Did you try out the piece? I am sure that you could sell your piece for a profit! It looks so good and is much cheaper than other matrix pillars.
There are other matrix pillars?
 
Top Bottom