Cheap High Quality Bubbler

[ragnorokk]

710=OIL. The FC-710 is a great dab rig with minimal diffusion and small volume for great flavor retention.

So what would be the purpose of the matrix? Is that for flower? Combustion?

I would definitely buy a new nail asap. There are some on DHGate worth exploring. I went with Quartz Bangers from Kathy to try out and I love it more than Ti. I got the 4mm quartz bangers on order from JLHsmoking now. I got a universal Ti domeless nail from Kathy also that I like. Although, some may be wary of purchasing Ti from China, so even moreso I'd grab quartz banger.

I haven't tried any nail that need a dome... But I've tried the free glass nail and its rubbish.

Edit: I was unable to find a ceramic nail design I liked after 3 nails. Wouldn't suggest you explore these unless someone else can suggest one.

Thanks, mano. I see the 4mm thick ones cost significantly more, but I intend to buy the quartz banger/carb cap option from jlhsmoking. Their Ti nail combo looks nice, too.

 

[Frederick McGuire]

Nothing like stacking tubes for MEGA HITS!! My GBD Fritter is always the middle piece!!

It was the middle HT!

Bottom - hydra foot
Bottom HT - removable MP HydraCirc
Middle HT - cbd fritter
Top HT - swagger puck

'Twas ridiculous

How?

I have the GBD fritter, it has an 18mm female outlet for attaching the mouthpiece.
I put a m2m in there to allow a ht on top.
Placed my swagger puck on top of that.
Underneath it all was my new HydraCirc with removable MP from @canj00digit?

I think I have found my Sublimator glass i have been searching for. Finally. Large heavy sturdy base. Just hoping the natty perc is enough diffusion

I've used my sub with it, it's a nice combo.
I'd prefer something with more diffusion for regular use, but every now and then it's a really fun pairing

Imo it is similar to a natty perc but better.
I have a tiny Klein bottle style natty perc rig from kathy, and the 710 is much smoother than it...

So what would be the purpose of the matrix? Is that for flower? Combustion?

high diffusion - Generally less desirable for oils, but perfectly fine to use if you want to smooth the hit out.

I'd say it'll be generally suited for flowers, but it should be good for just about whatever you want to put through it.

 

[ragnorokk]

Ok, that's probably how I ended up with the d020-d from the suggestions on FC - I wanted an all-arounder. Now I want an oil rig, so I suppose I'll check out the diffusion pump. Thanks guys.

 

[Frederick McGuire]

Ok, that's probably how I ended up with the d020-d from the suggestions on FC - I wanted an all-arounder. Now I want an oil rig, so I suppose I'll check out the diffusion pump. Thanks guys.

I'd say around 50% of my errl goes through my 710

 

[DieHard]

I'd say around 50% of my errl goes through my 710

I'm literally using mine now. But I'm about to rotate my En4cer back into play!

 

[Monsoon]

I think I have found my Sublimator glass i have been searching for. Finally. Large heavy sturdy base. Just hoping the natty perc is enough diffusion

If you're talking about the FC-710/Diffusion Pump, it will NOT work with the Sublimator. It has a 14mm male joint and is more of a hand held piece. For the Sub I'd recommend something like the FC-186 instead.

 

[A1FBG]

If you're talking about the FC-710/Diffusion Pump, it will NOT work with the Sublimator. It has a 14mm male joint and is more of a hand held piece. For the Sub I'd recommend something like the FC-186 instead.

An adapter can fix that. Not a fan of the knock off stereo matrix. I do like that binary matrix tho

 

[sxmokeUP]

I'll try and make one later tonight, it definitely drains quickly.

edit -
here http://gfycat.com/GenerousUnitedCoral

is that a video of this? http://www.dhgate.com/product/advance-booking-2015-new-high-quality-glass/218127026.html

the tapered downstem looks weaker than a full one

 

[A1FBG]

All I gotta say is damn

For a prototype this thing is done really well. The mouthpiece could be a smaller diameter and there needs to be joint support.

Do you know around when this will be released?

 

[dabsonthemountain]

Theres a lot of cool stuff but will someone just make a nice small pear shaped klein?

I actually just found this..

http://www.dhgate.com/product/2015-new-glass-bongs-with-birdcage-perc-14/245027681.html
But 0 transactions.
And then a sovereighnity hornet knockoff too:
http://www.dhgate.com/product/glass...int-branch/245417270.html#s2-17-1b|3158027467
And that purple black ball rig is everywhere
http://www.dhgate.com/product/2015-...water-bongs/245469898.html#s2-4-1b|3158027467

 

[A1FBG]

I know there will always be American glass supporters for the high end name brands but do you guys think this growing chinese glass market is going to take over and put other glass blowers out of business or forced to lower their prices.

I think so to be honest

 

[NickDlow]

I know there will always be American glass supporters for the high end name brands but do you guys think this growing chinese glass market is going to take over and put other glass blowers out of business or forced to lower their prices.

I think so to be honest

Hopefully the latter of the two. Lower those damn prices! Tho I have found reasonably priced American glass IMO (200-500). I can stomach that but 1500 to 2500 is obnoxious!!! That's almost my fuckin car payment for a year, no thanks. Take your crazyship elsewhere I'm all set thanks.

 

[canj00digit?]

It was the middle HT!

Bottom - hydra foot
Bottom HT - removable MP HydraCirc
Middle HT - cbd fritter
Top HT - swagger puck

'Twas ridiculous

I have the GBD fritter, it has an 18mm female outlet for attaching the mouthpiece.
I put a m2m in there to allow a ht on top.
Placed my swagger puck on top of that.
Underneath it all was my new HydraCirc with removable MP from @canj00digit?

Damn! I bet my old HydraCiric sure is glad to go to it's new home. It lived a boring life with me, and already now it's having tower of ménage à trois with your glass line up!

 

[Frederick McGuire]

Damn! I bet my old HydraCiric sure is glad to go to it's new home. It lived a boring life with me, and already now it's having tower of ménage à trois with your glass line up!

Gotta give it a warm welcome

 

[turdhole]

I know there will always be American glass supporters for the high end name brands but do you guys think this growing chinese glass market is going to take over and put other glass blowers out of business or forced to lower their prices.

I think so to be honest

i hope so. american clear glass prices are outrageous and the clear glass blowers seem to be the ones bitching most about the chinese, i dont see a lot of headie artists complaining much about china.

i feel like the clear glass artists are running a constant smear campaign against china for 2 reasons: fear of how good the chinese are getting and the chinese are exposing how little it actually cost to make this shit

keep up the good work china

 

[snackmaster]

the chinese are exposing how little it actually cost to make this shit

The cost of doing business for an individual (without a big name) or small US company is way different than Chinese shops though. While I enjoy Chinese glass, I think it's gotta hurt individuals and smaller shops more so than the premium brands charging truly outrageous prices.

 

[turdhole]

The cost of doing business for an individual (without a big name) or small US company is way different than Chinese shops though. While I enjoy Chinese glass, I think it's gotta hurt individuals and smaller shops more so than the premium brands charging truly outrageous prices.

i'd be willing to bet that most individual blowers are operating without a business license and whatever other crap you're supposed to have in the US and every company is cooking the books and using whatever loop hole they can to get out of paying more taxes. i dont feel sorry for them

 

[snackmaster]

i'd be willing to bet that most individual blowers are operating without a business license and whatever other crap you're supposed to have in the US and every company is cooking the books and using whatever loop hole they can to get out of paying more taxes. i dont feel sorry for them

Maybe, but equipment, materials, workspace, acquiring the skill, design time, etc all cost $$$ and that adds up. Might see fewer blowers getting into scientific glass in the US because even with really slim margins they can't compete. Is that a positive consequence? Doesn't seem like it.

Anyway, just my and I'll shut up now.

 

[dabsonthemountain]

I think the Us blowers will lower thier prices. There isn't a demand for china glass if the blowers lower their prices. People want american glass. It might be the only thing in their home that's actually 100% american, but they still want american glass. Very few are even willing to buy chinese once. They don't see any "art" in a piece made by a squatting 7 year old boy, but they do see art in the same piece made by an american. Even I feel this way, maybe everyone does. Sweatshops being run by orders don't really produce art. I sort of feel bad holding it even. I would be willing to pay $100 more just to have art instead of a "Chinese manufactured good". So american shops don't really have to worry about going under, however, we will start seeing lower prices soon enough.

 

[turdhole]

i see most clear glass as a utensil or a tool, if i want art i'll go heady but that's just me

 

[NickDlow]

I think the Us blowers will lower thier prices. There isn't a demand for china glass if the blowers lower their prices. People want american glass. It might be the only thing in their home that's actually 100% american, but they still want american glass. Very few are even willing to buy chinese once. They don't see any "art" in a piece made by a squatting 7 year old boy, but they do see art in the same piece made by an american. Even I feel this way, maybe everyone does. Sweatshops being run by orders don't really produce art. I sort of feel bad holding it even. I would be willing to pay $100 more just to have art instead of a "Chinese manufactured good". So american shops don't really have to worry about going under, however, we will start seeing lower prices soon enough.

9 out of 10 local shops I've been to sell Chinese glass at US glass prices. Also you're purely speculating on their work conditions.

So is every product made in China comes from a squatting 7 year old in a sweat shop? That's a lot of 7 year olds.

 

[Deano]

how does http://www.dhgate.com/store/product/2014-new-27cm-height-glass-smoking-pipe-7/213213174.html steven's toro compare to http://www.dhgate.com/store/product/hot-sell-glass-bong-glass-smoking-pipe-with/191000259.html the yingmin5 toro anyone know?

I too am looking into these and noticed that yingmins is listed as a 19mm joint. Is that accurate? Would a small 18mm ash catcher not work with this?

 

[Melting Pot]

I too am looking into these and noticed that yingmins is listed as a 19mm joint. Is that accurate? Would a small 18mm ash catcher not with with this?

it's technically 18.8 some Call it 18 some call it 19 either way you're good.

 

[Deano]

it's technically 18.8 some Call it 18 some call it 19 either way you're good.

Thanks man!

Has anyone used an ash catcher with Steven or yingmins toro?

 

[_WaxPayne_]

Hello FC

Sorry it took me so long to get some pics of the replacement pieces for my broken stereo matrix(fc-186) and broken Dabbacino from Steven. He did deliver them both though and separately too! Both came with no knicks, scratches, hairlines or blemishes to the glass. I included pics of the FC-1000 just because its my favorite DH piece Please pardon the wax all over the Dabbacino and partially on the 186. Also not sure why tinypic uploaded most of em sideways....but in my current state of mind, they all look straight

Looking to get the FC-710 and the Straight Egg next from Steven.

Have a very safe and very good Fourth of July . Come back with all your fingers

IMO;
If you want it purely as a show piece and you like the spinning of the wheel - go for it.
If you want something spinning parts that's also highly functional, then join me in hoping eventually we will get some kind of propeller perc piece produced at some point

That is amazing!!!!! really hope it gets cloned or affordable soon ! It's like a carousel , bet it gets u just as dizzy too