Quetzalcoatl
DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
I think he was just posting the link. Iirc whoever ordered it got refunded eventually.
Cheap High Quality Bubbler
- Thread starter Bleezy
- Start date
-
- Tags
- cheap bubbler glass
hanfhead
is high
I don't have them, they just caught my eye looking at bubblers on dhgate.
isn't this the one someone ordered and never received?
http://www.dhgate.com/product/1pcs-glass-pipes-glass-bubbler-glass-oil/181916393.html
isn't this the one someone ordered and never received?
http://www.dhgate.com/product/1pcs-glass-pipes-glass-bubbler-glass-oil/181916393.html
Last edited:
Anonymouse
Sith I care
Is that the same listing? IIRC the one that got refunded had a photo of a real Toro piece, and those pics look to be an actual knock-off.
hanfhead
is high
I just ran into that listing on there as well and edited it into my post. I thought it was different I remember that happening. Looks like they made a knock-off now, maybe they are actually available?
Quetzalcoatl
DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
Ah, thought they were the same listing, just a different picture.
grokit
well-worn member
isn't this the one someone ordered and never received?
http://www.dhgate.com/product/1pcs-glass-pipes-glass-bubbler-glass-oil/181916393.html
Yup, that was my 1st dhgate order.
Quetzalcoatl
DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
Not all the showerheads will fire... No, not for a note.
jambandphan03
in flavor country
here's a semi heady looking rig http://www.dhgate.com/product/1pcs-...er-glass-glass/179175349.html#cppd-5-5|null:2
Frederick McGuire
Aggressively Loungey
I've seen that exact perc setup on pieces on aliexpress before.
Anyone think these are worth $100? supposedly blown in Michigan. Called a matrix perc :/
Not a matrix by a long shot, and if they're blown in Michigan I'd be surprised...
They've got the trademark China glass lack of understanding of what the perc should be doing...
If you possibly could pull hard enough to make all 4 shower heads fire, you'd have 2 great big lungs full of water...
I'd be hard pressed to pay more than $10 for it TBH...
And that's including the dome...
lazylathe
Almost there...
Thanks @PoopMachine !
Just ordered myself one of these rigs!
It's payday today and i got a tax refund!
So far this is my most expensive piece of glass i have ordered and don't think i will go much more!
Last edited:
PoopMachine
Well-Known Member
I bought one of those and gave it away. It might be okay for smoking because the airflow through the slide is so much less but vaping, you end up with a mouth full of water. Ive given away all the pieces I bought from China with the exception of the D020. That thing aint going anywhere.
Man.. youre gonna love it. Someone posted about another piece in the Evo thread from the same guy and they were raving about it as well. Ill probably buy another piece from him next month.. Not sure which one.. he has some really cool stuff.
lazylathe
Almost there...
I am excited to see how it performs with the Herbie and my Nano!
If you like the D020 you should definitely get a W-010 (LY-004)!! I love mine!!!
My favourite piece that now lives with @biohacker and he loves it!
Check it out:
http://www.dhgate.com/product/1pcs-...lass-glass/179241308.html#s2-11-1a|4209216380
Can't find the cheaper place at the moment... I paid $35 for mine.
Packing up 4 of the 5 WT knockoff's from The SunshineStore (Dhgate). Here's the 4 I'm shipping out. These guys look GREAT - the only difference is the size of the slits - some of the slits appear quite long compared to others. But this doesn't seem to really affect the function of the unit. The 5th one which I'm keeping had a bent splash-guard in the mouthpiece - it's not bad - but crooked, the rest were straight (or straight enough to not notice).
Note when I unwrapped the units, each was coated in a nasty condensation (inside the bubblewrap!). I gave them a nice HOT water soak, and then cleaned again with a fresh batch of PBW, soaked for an hour or more in PBW, then another long rinse with hot water.
Since I know you're anxious to see what these actually look like, here's two photos I snapped before packing up them up:
Note when I unwrapped the units, each was coated in a nasty condensation (inside the bubblewrap!). I gave them a nice HOT water soak, and then cleaned again with a fresh batch of PBW, soaked for an hour or more in PBW, then another long rinse with hot water.
Since I know you're anxious to see what these actually look like, here's two photos I snapped before packing up them up:
$95.81 - took a while to ship - My D020 shipped 4 days before the WT's!
I measure 131mm which is 5.15 inches
They are quite short, and when I did a long hard draw, I did get a bit of water splashing through into the mouthpiece. But I won't know how they perform until this weekend when I get my Ascent back....
I wonder if I could connect this to my Lotus vape somehow.... ha ha haha
ataxian
PALE BLUE DOT
Too bad they don't have a 18mm female fitting for the mouth piece.Packing up 4 of the 5 WT knockoff's from The SunshineStore (Dhgate). Here's the 4 I'm shipping out. These guys look GREAT - the only difference is the size of the slits - some of the slits appear quite long compared to others. But this doesn't seem to really affect the function of the unit. The 5th one which I'm keeping had a bent splash-guard in the mouthpiece - it's not bad - but crooked, the rest were straight (or straight enough to not notice).
Note when I unwrapped the units, each was coated in a nasty condensation (inside the bubblewrap!). I gave them a nice HOT water soak, and then cleaned again with a fresh batch of PBW, soaked for an hour or more in PBW, then another long rinse with hot water.
Since I know you're anxious to see what these actually look like, here's two photos I snapped before packing up them up:
They just copied a horrible design!
Good for BONG people I guess.
With only 11 to 12% in medical need I doubt the design will be improved.
The PNWT is a goofy design.
The mouth piece is awkward?
Even if it was free I would throw it in the trash!
Last edited:
mrweed
vaporizer review blogger
btw. this little thing might be interesting, too. The jet flash chamber is only 20€ at the blackleaf store and will improve vape-bonging a lot, i think! unfortunately, only available with two 18mm joints!
http://vaporeview.wordpress.com/2014/04/04/tips-tricks-jet-flash-chamber-and-vaporizers/
http://vaporeview.wordpress.com/2014/04/04/tips-tricks-jet-flash-chamber-and-vaporizers/
http://vaporeview.wordpress.com/2014/04/04/tips-tricks-jet-flash-chamber-and-vaporizers/
http://vaporeview.wordpress.com/2014/04/04/tips-tricks-jet-flash-chamber-and-vaporizers/
Mister G
Deceptively Old Fart
The Jet Flash is similar to the Helix Knockoff I got a few weeks ago with my D020 - CLICK HERE
Major difference being the JF is an inline piece with joints at the ends and the Helix is more of a mouthpiece.
This reminds me I intended to try it with my PnP...sadly I am getting very dry and may be out of material to vape for a week or two...very sad panda...
Major difference being the JF is an inline piece with joints at the ends and the Helix is more of a mouthpiece.
This reminds me I intended to try it with my PnP...sadly I am getting very dry and may be out of material to vape for a week or two...very sad panda...
Eh, I have the 14mm Straight GONG adapter for my DV ascent - it fits perfectly. You could always get a reverse reducer from 14 to 18mm if you wanted to connect to something else?
As a portable WT, I think it'll work perfect. I didn't find the mouthpiece awkward at all. Actually can't wait to try it out with the Ascent!
@mrweed - Interesting! I had a knockoff mini hurricane many years ago - LOVED it for combustion - the jets allowed the perfect mixture of cool air to chill the hit!
ataxian
PALE BLUE DOT
Tried that!
Sorry the mouth piece is gross!
Opening your mouth that big is kind of weird? Why vape in public anyway?
A D020 blows it away!
They are not definitions.
Preference only!
I don't like large mouth pieces.
Sorry!
In the 70's when BONG's became popular I preferred a well rolled Joint instead. Never learned to use a BONG!
I don't care about the proper vocabulary.
If you like the big mouth pieces that's your business.
I guess I need to leave this site.
See ya!
Last edited: