Cheap High Quality Bubbler

grokit

well-worn member
I have always been apprehensive of the "pour back in the bottle" cleaners, it is refreshing to hear your positive experience. I have to ask though, does it get nasty keeping old dirty bong-water? How long do you keep reusing that water before needing to finally chuck it out?

I have some grunge off that I do that with,
but I always pour it back in through a coffee filter.
:science:
There's no bongwater,
it's just the grungy piece needing grunge-off.
Amazing stuff of last resort!
 

ataxian

PALE BLUE DOT
@ataxian I am using Orange Chronic at the moment and it works even faster than ISO for me.
Glass comes out looking like new and you pour what you used back into the bottle.
So very little is used very time.

I tried ISO, PBW but for me this is the fastest.
5 Minutes or less to sparkling, taste free glass!
The SMOKE SHOP in my town have the ORANGE CHRONIC. I was ready to throw away all my glass and just get pieces. I will try one more time.
I have stems with a CHILLUM tip are my drivers until I get my dirty glass clean!
d022-double-chamber-glass-water-pipe.jpg

Anyone have the D022?
 
Last edited:

grokit

well-worn member
Just placed my 2nd dhgate order,
this time with the highly-recommended sunshine store :)

18-8mm-honeycomb-smoking-water-glass-percolator.jpg

This should work great with my blaze bong (18mm)

14-5mm-14-5mm-inline-glass-percolator-ash.jpg

This will be for my lotus with the j-hook (14mm)

If you recall I never got my 1st dhgate order (different seller,
tko recycler) but dhgate took care of my refund.

How good of a chance do I have of getting my requested colors (pictured)?

Sunshine store rocks!
They sent me a tracking number an hour or so after I ordered these :rockon:
 

Sinclue

OK disagree with me, I can't force you to be right
Which goes further? You get 4x as much simple green for 3/4 the price.


I got a good deal on Grundge Off a while back and use it for the more difficult cleaning. But it is much harder to rinse out completely. It can be used over and over and I funnel it back into the original bottles through a filter.

But the Simple Green is quick and easy. I use it 1:1 and often reuse it depending on how dirty it is. I clean my glass pretty regularly and I stocked up on the Cranberry Extract deal (RezBlock sub) so I use that too. As a result I've found that I use the Grundge Off less and less.

If I were buying now I'd go with the Simple Green only.

~
The SMOKE SHOP in my town have the ORANGE CHRONIC. I was ready to throw away all my glass and just get pieces. I will try one more time.
I have stems with a CHILLUM tip are my drivers until I get my dirty glass clean!
d022-double-chamber-glass-water-pipe.jpg

Anyone have the D022?

Damn, don't throw it away. Send it to me! I'll pay S/H! :cool:

~
 

lazylathe

Almost there...
I have always been apprehensive of the "pour back in the bottle" cleaners, it is refreshing to hear your positive experience. I have to ask though, does it get nasty keeping old dirty bong-water? How long do you keep reusing that water before needing to finally chuck it out?

I am not a heavy user so most of the build up i get is light.
I use hot water to rinse, then pour in a bit of OC and shake so that every surface is covered.
Pour the excess back and allow to sit for a minute.
Fill with hot water and shake and then rinse again with hot water till all the foam is gone.
Done!
 

PoopMachine

Well-Known Member
Which goes further? You get 4x as much simple green for 3/4 the price.

PBW works pretty well at getting the glass clean but it doesnt remove odor. My other two "go tos" are LA's Totally Awesome cleaner that they sell at all the dollar stores. Its like $3.00 for a gallon. Its cleaned even my grungiest of pieces. I also have had great luck with 91% ISO and some powered dishwashing soap. That actually removes the smell too.
 
PoopMachine,
  • Like
Reactions: ataxian

lazylathe

Almost there...
One other item i use occassionally to clean my glass is a powdered denture cleaner we get at work.
Hot water and some powder and it fizzes away for a while and gets it pretty clean.
Also removes any smells.

If you do use this be careful as they usually have some bleach in them and if you spill any on your clothes you are left with nice white spots!
Don't ask how i know this! LOL!
 

ataxian

PALE BLUE DOT
I still do the old ISO and a couple spoons of salt. Shake it around and it gets all the grit, rinse with hot water, fill, use:D
wtKuWkI.jpg

The "TKO" to the rescue!

My D020 I clean with the following:

Salt first into the water pipe
99% ISO - 1/4 - 1/2 of pipe

Wine stoppers in all the holes.

Shake 20 seconds.

Let sit for a few minutes.

Rise

One Table Spoon Baking Soda.
1/2 cup White Vinegar
Wine Stoppers
Shake for 20 seconds.
5 Minute soak
Rise warm water

Nothing special.
D020 ready Now!
 

Delta3DStudios

Well-Known Member
Accessory Maker
Guys! Came home for lunch and found my PNWT knockoff's had arrived! Unfortunately I had to eat lunch and head back to work, but the box looks pretty smashed, but I don't *hear* any broken glass.... I'll report back with findings/pictures later. Unfortunately I still don't have my DV Ascent for a proper test, but I should have it by Saturday.

BTW that combo looks awesome!
D020, Lotus, Jyarz

I've got a D020 and the Lotus, but the lotus is a bit close to my face (Can feel the heat from the torch), I'm looking for an 15degree angled male to female adapter (rare, but they exist)
 

ataxian

PALE BLUE DOT
Guys! Came home for lunch and found my PNWT knockoff's had arrived! Unfortunately I had to eat lunch and head back to work, but the box looks pretty smashed, but I don't *hear* any broken glass.... I'll report back with findings/pictures later. Unfortunately I still don't have my DV Ascent for a proper test, but I should have it by Saturday.



I've got a D020 and the Lotus, but the lotus is a bit close to my face (Can feel the heat from the torch), I'm looking for an 15degree angled male to female adapter (rare, but they exist)
I tried the LOTUS with the D020 however the TKO is better.
They both work.
 

DieHard

Accessory supplier
Accessory Maker
Guys! Came home for lunch and found my PNWT knockoff's had arrived! Unfortunately I had to eat lunch and head back to work, but the box looks pretty smashed, but I don't *hear* any broken glass.... I'll report back with findings/pictures later. Unfortunately I still don't have my DV Ascent for a proper test, but I should have it by Saturday.



I've got a D020 and the Lotus, but the lotus is a bit close to my face (Can feel the heat from the torch), I'm looking for an 15degree angled male to female adapter (rare, but they exist)
You might try oregonglassblower on ioffer. If it is not on the site just find the closest thing to what you want (maybe a straight adapter with same fittings you want). Put it in shopping cart. Then click "make offer". Be sure to put in the comment section exactly what you want and Mike will probably make the next day and ship it out very quickly. When you make an offer be sure to make it with 10% off because there is a 10% FC discount. I have used him 3 times and always more than satisfied! Each order was custom and it didn't cost extra.:)

Edit to add link: http://www.ioffer.com/selling/oregonglassblower
 
Top Bottom