Cheap High Quality Bubbler

[LesPlenty]

smashed my OG FC RC this morning

Damn. Oh well, better that than a genuine Mothership, still hurts though, especially if it was a good version (I have one FC RC with a big chunk missing from the base that I just can't throw out as it works so well)
Maybe I should grab a goose by the neck while they are a bit cheaper, I might message them to make sure they get a unit to my preferred points.

 

[EmDeemo]

...I might message them to make sure they get a unit to my preferred points.

Do it! Then do it again!

I'll be ordering another one at some point so its just a matter of time before one of us tells them about themselves

 

[Chaos47]

Ugh DHgate added terms to the $12 coupon its off of a $69 dollar purchase

 

[Cilleire]

Damn. Oh well, better that than a genuine Mothership, still hurts though, especially if it was a good version (I have one FC RC with a big chunk missing from the base that I just can't throw out as it works so well)
Maybe I should grab a goose by the neck while they are a bit cheaper, I might message them to make sure they get a unit to my preferred points.

Do it! Then do it again!

I'll be ordering another one at some point so its just a matter of time before one of us tells them about themselves

My goose neck came in, it also has the shorter pipe and angled joint, mine also looks exactly like the photos on dhgate. All that said though it functions amazingly, great flavour and I have very little fear of the flowerpot tipping it with such a high water level and wide base.
I would very much like to get my hands on one with a cleaner build in the future.

 

[EmDeemo]

I would very much like to get my hands on one with a cleaner build in the future.

Please email TAG, if you havent already.

Let them know there is interest.

 

[oreo47]

I am considering getting the D020 or the mobius matrix sidecar for my enano.
I am really stuck on choosing.
which is better.
which will have more diffusion/cooler vapour?
They are both the same height.

 

[Chaos47]

The sidecar has a better perc then the regular D020 but there is the D020-D version with a matrix perc so at that point its pretty much just a personal preference of style for the neck.

 

[cybrguy]

FC-187 has a significantly larger can and displaces more water so does more cooling. It is WAY thicker and heavier. The D020 has noticeably greater airflow and works better with low flow vapes like VapCaps.
That being said, I like them both very much and use them both quite a lot.

 

[started@52]

Popularglass ash catcher on NV(FC-187?)
Ads draw resistance that is perfect for me and the FP.

 

[Ramahs]

I don't have a D020, but I have a Mobius Matrix Sidecar knockoff, and It suits me quite well.
If I broke it, I'd most certainly buy another.

 

[Vaporhead99]

https://www.amazon.co.uk/gp/product/B07K7LNH8W

I'm looking at the above piece to use with the Arizer Air & E-Nano, thoughts on it? I'm new to glass so all input will be really appreciated...

 

[Chaos47]

https://www.amazon.co.uk/gp/product/B07K7LNH8W

I'm looking at the above piece to use with the Arizer Air & E-Nano, thoughts on it? I'm new to glass so all input will be really appreciated...

IMO Possible negatives to this piece:
45* stem for an E-nano or an Air is not ideal
45* stem is not ideal to using a cloud buddy (Y adapter that is super handy with a log vape)
14mm doesn't feel as solid as 18mm when it comes to stacking things like cloud buddies or ash catchers
Tree percs can be delicate and are considered out dated.
Probably a pain to clean

Positives:
Price
Shipping speed

 

[Ramahs]

https://www.amazon.co.uk/gp/product/B07K7LNH8W

I'm looking at the above piece to use with the Arizer Air & E-Nano, thoughts on it? I'm new to glass so all input will be really appreciated...

Too many percs.

 

[LesPlenty]

to use with the Arizer Air & E-Nano

Something like this would be better;

https://www.dhgate.com/product/new-...g-glass-smoking/199386677.html#mfavit-13-null
The AA is better native IMO.

 

[olivianewtonjohn]

@lhodgy

Option C LOL

Get a big glass piece heavy hitter for the enano, of course the air can join in on fun but its not the best for large water pipes:

https://www.dhgate.com/store/produc...ights/245686309.html?skuid=462712428972392450

Then get something like this for the air and enano (when you want more flavor):

https://www.namastevaporizers.co.uk...als-14mm-glass-water-tool?variant=19788074823

https://vapefiend.co.uk/collections/water-tools/products/budgie-vaporizer-water-tool

You can use the hydro tube with the stock ecig styled air mouthpiece.

I have a water pipe just like that namastevape one (but bought at puffitup) and I absolutely love it, I have had the pinnacle version years ago and like the puffitup model better because the mouthpiece is flared.

 

[Summer]

I don't like a large, rimless mouthpiece that my lips go into like with a bong since I don't get enough inhaling resistance. Prefer a flat disc type mp that my lips can press against.

 

[LesPlenty]

Prefer a flat disc type mp

Sorry @Summer I read that as Fat Dick and remembered this;
https://www.dhgate.com/product/20cm...ality/413207285.html#s1-14-1;searl|4189053946

DHGate, always good for a laugh, gee they sell some weird shit ou of China, I wonder who they 'knocked' this off from?

 

[Summer]

I wonder who they 'knocked' this off from?

A guy.

 

[bossman]

Something like this would be better;

https://www.dhgate.com/product/new-...g-glass-smoking/199386677.html#mfavit-13-null
The AA is better native IMO.

That's the one I use with my enano. I've been eyeing the big one @olivianewtonjohn recommends but I honestly don't use water that often. And I dislike those water mouthpieces: not enough cooling from the tiny amount of water that you can't ever get out all the way when you're done.

 

[olivianewtonjohn]

That's the one I use with my enano. I've been eyeing the big one @olivianewtonjohn recommends but I honestly don't use water that often. And I dislike those water mouthpieces: not enough cooling from the tiny amount of water that you can't ever get out all the way when you're done.

I find the cooling makes a huge difference. So much so I kept wanting to rig something up for my fury edge last night (still waiting on the WPA). I'll have to test if all the water comes out, if I want it out I usually blow some air through it. But honestly I usually leave water in it, bad habit but a quick ISO rinse and its back in business. It's my favorite piece for portables.

For my enano I like the standard bubblers fine but where I really like it is with larger water pipes. This one was one of my favorites (scroll down for the perculation video).

https://www.thickassglass.com/produ...ick-w-spinning-splashguard?variant=2591050180

 

[MasonJar]

End of cheap shipping from China (epacket)? I read a post in reddit that links to this discussion on Amazon sellers forum: https://sellercentral.amazon.com/fo...ore-cheap-shipping-for-chinese-sellers/493043

Bottom line if the above is true, cheap shipping ends on Oct 17.

I still have one item I am awaiting delivery... another FC-710 Bates diffusion pump clone which will be a backup. I am now thinking maybe get another rattle can (either the VC RC by yingmin5 or the RC with the long neck from popularglass) before Oct 17.

 

[LesPlenty]

End of cheap shipping from China

Should read;
Only USA will be charged a tariff for any OS purchases, does not affect anyone else, their quote;
This is great news for U.S. sellers, especially eBay sellers.
So if in the US, stock up, glass is a nonperishable consumable anyway.

 

[Kanna_Kult]

End of cheap shipping from China (epacket)? I read a post in reddit that links to this discussion on Amazon sellers forum: https://sellercentral.amazon.com/fo...ore-cheap-shipping-for-chinese-sellers/493043

Bottom line if the above is true, cheap shipping ends on Oct 17.

I still have one item I am awaiting delivery... another FC-710 Bates diffusion pump clone which will be a backup. I am now thinking maybe get another rattle can (either the VC RC by yingmin5 or the RC with the long neck from popularglass) before Oct 17.

Hmmm I heard the same thing several months back and nothing ever came of it besides a tiny price bump for most vendors (like maybe $2 tops on most pieces) so I wonder if this time it’s for real. I’m amazed something like this hasn’t happened sooner with the current political climate in the USA. I wonder if this will bump up the price on 3rd party importers like Greek glass and TAG too. Would this also affect the “stocked in the USA” items on DHG? This makes me want to buy things I do not need haha

EDIT: Just to be clear not bitching about politics! Pretty sure that’s against the forum rules lol. just surprising after all I hear about trade with China in recent years, then again I don’t follow that stuff super closely

 

[wildything]

Well this could explain why CCG raised their prices again recently. And yes I would think the US reseller prices would rise accordingly.

The only thing is about buying glass now to stock up is that they always will come out with a new one that looks even better

 

[LesPlenty]

I usually break my glass before it gets out of fashion, adapters and down stems will always be needed.