Cheap High Quality Bubbler

Stu

Stu

Maconheiro
Staff member
Ramahs said:
TAG just has much higher QC standards than most of these DHGate sellers. The average price is a little higher than much of the wiggly/wobbly DHGate stuff, but not much higher. So, overall you're getting more bang for your buck.
Click to expand...
^^ Pretty much this. IME the quality of TAG pieces are definitely on the high end of anything coming from China. Love the super-thick bases. While they are a bit more expensive than DH Gate glass, they are a good value IMO.

:peace:
 
LesPlenty

LesPlenty

Well-Known Member
Company Rep
FlyingLow said:
I'd be in if the mouthpiece were a bit higher, and provided a better view above an enail.
Click to expand...

https://www.dhgate.com/product/saml-glass-26cm-tall-bong-diffusion-pump/476462145.html#mfavit-4-null

emmdeemo said:
TAG have replied essentially saying they're going to make a rattle can, but not for a long time, unless they hear from us asking them to make it sooner.

Email em, folks! :)
Click to expand...
TAG is only Chinaglass marked up to cover their QC and business costs, all fair I say.:tup:
CCC QC is the best I have seen on DHGate, that is why they are a bit more expensive too.
I still like my new Yingmin5 VA Rattle Can better than my 2x Stevenimz jobs, cheaper too;
https://www.dhgate.com/product/amaz...glass-water-pipe/474981921.html#mfavit-3-null


Oh, and 18mm female joints rule.:rockon:
 
Last edited:
Ramahs

Ramahs

Fucking Combustion (mostly) Since February 2017
Stu said:
^^ Pretty much this. IME the quality of TAG pieces are definitely on the high end of anything coming from China. Love the super-thick bases. While they are a bit more expensive than DH Gate glass, they are a good value IMO.

:peace:
Click to expand...

LesPlenty said:

https://www.dhgate.com/product/saml-glass-26cm-tall-bong-diffusion-pump/476462145.html#mfavit-4-null


TAG is only Chinaglass marked up to cover their QC and business costs, all fair I say.:tup:
CCC QC is the best I have seen, that is why they are a bit more expensive too.
I still like my new Yingmin5 VA Rattle Can better than my 2x Stevenimz jobs, cheaper too;
https://www.dhgate.com/product/amaz...glass-water-pipe/474981921.html#mfavit-3-null


Oh, and 18mm female joints rule.:rockon:
Click to expand...

See...both the GonG connections on those in the two pics are crooked. The one in the upper pic is tilted in toward the main chamber, and the one in the lower pic tilts out away from the main chamber.

Either of those two defects would drive me nuts.
 
FlyingLow

FlyingLow

Team NO SLEEP!
@LesPlenty I've come across that and something about it is just not aesthetic to me.

Not sure if it is due to the wonkyness ramha eludes to, or if it is the curves of the neck, or the [imo] unproportionally small base .... I can't put my finger on it.

I love scientific pieces, but this one does not get me going. I'd really love an original Bates Worm pump, but I hate male joints...
 
E

EmDeemo

ACCOUNT INACTIVE
FlyingLow said:
@LesPlenty I've come across that and something about it is just not aesthetic to me.

Not sure if it is due to the wonkyness ramha eludes to, or if it is the curves of the neck, or the [imo] unproportionally small base .... I can't put my finger on it.

I love scientific pieces, but this one does not get me going. I'd really love an original Bates Worm pump, but I hate male joints...
Click to expand...


Wonk, curves, more stable base... Noted.

Open question... in the long necked version that is posted in thread already, should the 45 degree cut bit be taller? It looks too low to me but I dont know if thats a preferred aspect to you fine folk? I only have one rattle can myself, I dont have another yet to compare it with.
 
wildything

wildything

Well-Known Member
Yeah I'm not sure how much if any Steven will listen to our concerns but perhaps if a lot of people contact at the same time then they will be more likely to acknowledge.

TAG is good glass for china made/US ship, as I have stated many times in this thread. But since they closed shop in PA and moved to CO their prices are listed at a bit higher and they were already getting pricy for china, although hard to beat the quality in that price range. So if they make the rattle can and the perc is correct I'm sure it will rock! :rockon:
 
shervin2

shervin2

The Two-Click Bowlshevik & Sticksimus Briximus
Knock your socks off face melt.

jkkbt5tx.jpg
 
E

EmDeemo

ACCOUNT INACTIVE
LesPlenty said:
Most definitely, that pipe should be as low and long as possible, especially on the new gooseneck model as it looks like a dab orientated rig so needs a bit longer cooling path.:2c:
Click to expand...

Nice one, thanks.

Im going to try and draw up a crude 'technical' drawing of what it 'should' look like, to send to TAG and anyone else I can get interested in doing this properly for a decent low enough price, so I wanna make sure I'm correcting things correctly :)
 
almost there

almost there

Well-Known Member
emmdeemo said:
Nice one, thanks.

Im going to try and draw up a crude 'technical' drawing of what it 'should' look like, to send to TAG and anyone else I can get interested in doing this properly for a decent low enough price, so I wanna make sure I'm correcting things correctly :)
Click to expand...
while you're at it do you mind asking TAG if they can make it without that big ugly logo? I'd be much more partial to buying their stuff if it was unlabeled
 
E

EmDeemo

ACCOUNT INACTIVE
almost there said:
while you're at it do you mind asking TAG if they can make it without that big ugly logo? I'd be much more partial to buying their stuff if it was unlabeled
Click to expand...

A lot of their stuff is unlabeled when I've looked before.

But I'm focusing on getting the thing made correctly, not trying to destroy the conversation with talk of their 'big ugly logo'! :D

There is nothing stopping you contacting them tho :)
 
Ramahs

Ramahs

Fucking Combustion (mostly) Since February 2017
almost there said:
while you're at it do you mind asking TAG if they can make it without that big ugly logo? I'd be much more partial to buying their stuff if it was unlabeled
Click to expand...

Yeah, like @emmdeemo said, most of TAG's stuff has a non-lable option available. Though they are out of stock on a lot of models at the moment, so you may see a lot of limited color and label options of many of their pieces at the moment.
 
E

EmDeemo

ACCOUNT INACTIVE
Goose necked rattle can in the house.

It does indeed have all the problems noted in this thread from the picture we had. Certainly feels less sturdy than the one in my sig. The 45 degree cut is too low. And things are a little wonky, but not off center. The mouthpiece feels too small but that could just be because its smaller than I'm used to. The base is a little wobbly but only a tiny bit.

It functions perfectly tho, and its a great comparison device to go along with the rattle can I already have. I can easier make a drawing and see who I can get to make it now :D

I can see whats happening in the DCup dish a hell of a lot easier.

I mean, it'll replace my other rattle can as a daily driver but I wouldnt recommend it necessarily :)

EDIT: I think a side effect of the 45 degree cut being too low, is that I've filled it to my usual can size meaning the cut tube is now submerged, and now it has more chug than I'm used too. Does that sound like an accurate conclusion? The extra chug is adding airflow to the dcup dish so I can now get more terp pearls spinning, just wanna make sure I'm attributing the chug to the correct cause.
 
Last edited:
Chaos47

Chaos47

Well-Known Member
Apparently DHGate's 15 anniversary is coming up so they are having a presale now thru the 20th.

Looks like stores can opt into an 18-20% discount (really only 2-4% more then their usual everyday "sales") I see items with it at a couple of stores including Steven but CCG doesn't have it.. yet at least.

There are coupons too, $2 off $12, $5 off $39, $8 off $69, $20 off $169.

The blurb makes mention of spend $29 get a $12 coupon but there are no terms...
If I had to guess its a coupon you can earn now during the presale that can be used on the actual date of the anniversary? Dunno exactly.
I do see a banner in my cart about it at least...

I was going to get something tomorrow anyways so this works out perfect.
I wonder if the sale on the 20th will be even better.. looks like I might be making a couple orders this month lol.
 
Last edited:
E

EmDeemo

ACCOUNT INACTIVE
LesPlenty said:
One 'Sale' item of interest;
https://www.dhgate.com/product/saml...-diffusion-pump/476462145.html#mfavit-11-null

and;
https://www.dhgate.com/product/amaz...lass-water-pipe/474981921.html#mfavit-10-null

This one is hogging my attention with my herb vapes, the top one looks like it might be good with the nail.:tup:
Click to expand...

Tbh, mine is SO much like the top one, I think I might have got that exact one :D

EDIT: Actually, the angle of the top of the internal tubing on mine is way too close to the bowl, which could easily hinder the height of the 45 degree angle cut if they arent careful. Just another thing to point out to them if you order.
 
E

EmDeemo

ACCOUNT INACTIVE
LesPlenty said:
Short rattle tube and unlevel joint? If yes, glad it has gone, sorry you got it,:tup:
Click to expand...

Yep, plus the internal tubing I just edited about in the previous post.

I dont mind being the guinea pig to make sure further ones are made right! :)

At least the one I have functions fine.

Besides, I need to buy a back up anyway as I 'coincidentally' smashed my OG FC RC this morning :D

EDIT: Gives its all a go faster lean with the drop down attached :)

So5pyyH.jpg


EDIT 2: Personally, I'd ask them to make a more slightly substantial mouthpiece too.
 
Last edited:
You must log in or register to reply here.
Top Bottom