CCA Liger banger V3.0
- Thread starter mrbonsai420
- Start date
Hey everyone! I first want to thank the staff here on FuckCombustion and especially all of you loyal CCA Teammates. When I first started CCA never in a million years did I expect the level of loyalty that I have received! So much so that customer doesn't even begin to describe what each and everyone of you are; which is why I use the term Teammate! The CCA Team is continually growing and is now getting international awareness; I cannot thank you all enough for that!
The 3.0 gear has been a huge success and is only going to get better from here on out!
For all those who currently have a Flat Coil Liger 3.0, the updated coil shields are finally finished and on the way to me now. As soon as they land I will be getting each & every one of you a new heat/coil shield sent out! This shield will be able to be adjustable to fit ANY flat coil thickness from 2.5mm to 9mm (the avg. Flat coil is approx 3.25mm thick). By ensuring your coil is 100% flush with the base of the Flat coil vapor bucket, the efficiency of the Flat Coil Liger 3.0 should be vastly increased!
For all those currently waiting on your order to ship: Please realize that all parts are made to order and it can take up to 1-2 weeks for shipment (I apologize this was not clearly stated on the website, it is now). That being said, I should have all orders shipped out late this week/early next week.
---
Updates on what is in stock:
Sapphire - SOLD OUT (sold out in the first couple of hours) I have more Flat coil & 20mm on the way, should be here this week
SiC - SOLD OUT of 20mm (I have Flat Coil & 16mm SiC on hand) More 20mm should be here in the next 1-2 weeks
Quartz - SOLD OUT (the recent sale depleted my stock) More are on the way and should be here this week
Titanium - Certain items are Back-Ordered (my next batch shipped out today and will be here late this week/early next week)
Storm Cell caps - I will be having more arrive with the next batch of Ti (I expedited the production)
---
For all of you who have experienced delays, I am sincerely grateful for your patience. Orders have more then tripled in the last month and I am doing everything in my power to meet the demand as quickly as possible. With this large of a jump in supply there has been some very challenging speed bumps to navigate over; but I feel confident I have successfully been able to adjust accordingly.
---
Preview into the future for the loyal FC community: I have set my sights on moving all Titanium production in house this coming year. This will allow me to expand my supply while also granting me a more intimate power over the Quality Control of my products. I hold an extremely high standard for my products and want to ensure this standard is continually meet as demand skyrockets.
---
To my Beta team: Thank you!! You have been extremely generous with your feedback and efforts! Your continual dedication will not be forgotten.
For those who would like to join the Beta team (as I get asked quite a bit): I hold a very high standard with who I choose to surround myself with. I have been very lucky to be able to have some very intelligent and competent individuals that bring me an enormous amount of value!If you believe you have value to bring the table then this may just be the job for you! Please note: getting into the team in not an easy task and takes considerable effort, please only consider this an option if you have LOTS of experience with other vaporization gear & preferably have a scientific background.
---
For Cleaning instructions & common questions see the new F.A.Q. section of CCA710.com
https://www.cca710.com/pages/f-a-q
---
Installation videos & PDF manuals are in the works for all products. In the mean time please do not hesitate to shoot me an email with any issues you may have.
---
If you have any questions at all please do not hesitate to shoot me an email at: Contact@CCA710.com
Regards,
Josh Baier
Owner/Founder/Chief Inventor
Excellent first post. Great to have you here man!
alittledabwilldoya'
Sapphire Powered Dabstronaut.
Hey everyone! I first want to thank the staff here on FuckCombustion and especially all of you loyal CCA Teammates. When I first started CCA never in a million years did I expect the level of loyalty that I have received! So much so that customer doesn't even begin to describe what each and every one of you are; which is why I use the term Teammate! The CCA Team is continually growing and is now getting international awareness; I cannot thank you all enough for that!
The 3.0 gear has been a huge success and is only going to get better from here on out!
For all those who currently have a Flat Coil Liger 3.0, the updated coil shields are finally finished and on the way to me now. As soon as they land I will be getting everyone a new heat/coil shield sent out! The updated shield will be adjustable to fit ANY flat coil thickness from 2.5mm to 9mm (the avg. Flat coil is approx 3.25mm thick). By ensuring your coil is 100% flush with the base of the Flat coil vapor bucket, the efficiency of the Flat Coil Liger 3.0 should be vastly increased!
For all those currently waiting on your order to ship: Please realize that all parts are made to order and it can take up to 1-2 weeks for shipment (I apologize this was not clearly stated on the website, it is now). That being said, I should have all orders shipped out late this week/early next week.
---
Updates on what is in stock:
Sapphire - SOLD OUT (sold out in the first couple of hours) I have more Flat coil & 20mm on the way, should be here this week
SiC - SOLD OUT of 20mm (I have Flat Coil & 16mm SiC on hand) More 20mm should be here in the next 1-2 weeks
Quartz - SOLD OUT (the recent sale depleted my stock) More are on the way and should be here this week
Titanium - Certain items are Back-Ordered (my next batch shipped out today and will be here late this week/early next week)
Storm Cell caps - I will be having more arrive with the next batch of Ti (I expedited the production)
---
For all of you who have experienced delays, I am sincerely grateful for your patience. Orders have more then tripled in the last month and I am doing everything in my power to meet the demand as quickly as possible. With this large of a jump in supply there has been some very challenging speed bumps to navigate over; but I feel confident I have successfully been able to adjust accordingly.
---
Preview into the future for the loyal FC community: I have set my sights on moving all Titanium production in house this coming year. This will allow me to expand my supply while also granting me a more intimate power over the Quality Control of my products. I hold an extremely high standard for my products and want to ensure this standard is continually meet as demand skyrockets.
---
To my Beta team: Thank you!! You have been extremely generous with your feedback and efforts! Your continual dedication will not be forgotten.
For those who would like to join the Beta team (as I get asked quite a bit): I hold a very high standard with who I choose to surround myself with. I have been very lucky to be able to have some very intelligent and competent individuals on my Beta team that bring me an enormous amount of value!
---
For Cleaning instructions & common questions see the new F.A.Q. section of CCA710.com
https://www.cca710.com/pages/f-a-q
---
Installation videos & PDF manuals are in the works for all products. In the mean time please do not hesitate to shoot me an email with any issues you may have.
---
If you have any questions at all please do not hesitate to shoot me an email at: Contact@CCA710.com
Regards,
Josh Baier
Owner/Founder/Chief Inventor
Agreed.
Welcome!
LazyIdol
Well-Known Member
My liger continues to grow on me each day.
I am super in love with the insert system. It helps keep everything super tidy. Being able to drop my insert in alcohol and not having to worry about the main body aside from the air intake is super nice.
I keep meaning to post a longer review but have been absolutely slammed at work. Will hopefully post one tomorrow after work.
I am super in love with the insert system. It helps keep everything super tidy. Being able to drop my insert in alcohol and not having to worry about the main body aside from the air intake is super nice.
I keep meaning to post a longer review but have been absolutely slammed at work. Will hopefully post one tomorrow after work.
snowfall
New Member
As a huge fan of the product, and a believer it is hands down the best concentrate delivery system available, my humble advise to Josh would be, forget looking for more beta testers on a forum, you seriously need a business mentor to handle the business that is surely coming to your company. I would say if you are still a "one man band" as someone mentioned above, this is a mistake, unless you would like to remain a small company.
I personally would prefer not to see the product offered for sale until demand can be met, and demand is judged by people trained in this, hense my suggestion to seek help. I hope the frustration some of your customers feel is also appreciated. This frustration is the byproduct of the love of your product.
Seeking help was the best business advise I ever got, and all signs point to this potentially being a game changing time for the Liger, justifiably so.
I personally would prefer not to see the product offered for sale until demand can be met, and demand is judged by people trained in this, hense my suggestion to seek help. I hope the frustration some of your customers feel is also appreciated. This frustration is the byproduct of the love of your product.
Seeking help was the best business advise I ever got, and all signs point to this potentially being a game changing time for the Liger, justifiably so.
papapotbelly
Well-Known Member
Welcome, Josh! It has been an honor to beta test the products and help with copy on the site, which looks great, by the way! I have been checking up on the 2.0 thread going "where did everybody go?" lol, glad to see they just moved to this 3.0 thread and Liger Love is still going strong. Here's a couple pics of my beasts in the wild, to keep all of y'all going that are still waiting on orders (these are a bit older so the 20mm is a V2)
Monsoon
Well-Known Member
It's 11 months away so kinda hard to say at this point.
KimDracula
Well-Known Member
Got a Hurricane Cap in today.
I wouldn't recommend it for those with the 2.0 bucket. It looks like it will probably work much better with the 3.0 20mm though, since there appears to be a more substantial lip around the circumference on which to pivot.
I like the slim Stinger dabber but wish it was longer like others have said. It'll be the Storm Cell for now at least until I decide to upgrade to the 3.0 gear and a sapphire insert.
I wouldn't recommend it for those with the 2.0 bucket. It looks like it will probably work much better with the 3.0 20mm though, since there appears to be a more substantial lip around the circumference on which to pivot.
I like the slim Stinger dabber but wish it was longer like others have said. It'll be the Storm Cell for now at least until I decide to upgrade to the 3.0 gear and a sapphire insert.
herbivore21
Well-Known Member
I must +1 the shortness-of-dabber issue. I only ever use a d-nail stinger dabber with the liger caps because the risk of burning one's hand on the side of a hot carb cap is very real with the shorter liger traditional-style handles; which position the side of your hand too close to the hot cap, after removal when finishing your dab.
I also don't use the hurricane cap at all lately. It is too wide, too easy to burn yourself on, gets very hot and stays that way for a long time. Due to the shape, it is also hard to put down without rolling around on a flat surface too which is a PITA with something that gets so hot! Too much of the range of movement when using the hurricane cap with a 30mm leads to an incomplete seal with the dish and leaking vapor - this may be different with the 20mm v3 though, I haven't used that one
One positive I have noticed with the liger male bases is that they build up a lot of reclaim around the end of the vapor path going into the piece, that is easily collected with a dabber from your rig's GonG joint
alittledabwilldoya'
Sapphire Powered Dabstronaut.
I must +1 the shortness-of-dabber issue. I only ever use a d-nail stinger dabber with the liger caps because the risk of burning one's hand on the side of a hot carb cap is very real with the shorter liger traditional-style handles; which position the side of your hand too close to the hot cap, after removal when finishing your dab.
I also don't use the hurricane cap at all lately. It is too wide, too easy to burn yourself on, gets very hot and stays that way for a long time. Due to the shape, it is also hard to put down without rolling around on a flat surface too which is a PITA with something that gets so hot! Too much of the range of movement when using the hurricane cap with a 30mm leads to an incomplete seal with the dish and leaking vapor - this may be different with the 20mm v3 though, I haven't used that one
One positive I have noticed with the liger male bases is that they build up a lot of reclaim around the end of the vapor path going into the piece, that is easily collected with a dabber from your rig's GonG joint
I wouldn't mind a longer dabber tip on the Stinger dabber, but I haven't burned myself on it yet!
But, I don't leave it on for long periods of time, as I don't (yet) dab full melt.
Regarding a landing pad for the Hurricane cap, I use a couple of silicone (I know) containers: tops for flat StormCell caps, bottoms for the rounded Hurricane caps:
Last edited:
herbivore21
Well-Known Member
I have seen these pics before actually bro, but I should clarify that I do not put hot carbs down on anything silicone (I actually do not use silicone mats or containers at all, they're just not inert enough to be allowed near the material that I have worked so hard to produce!). This is because there is a possibility after a long dab that my cap will be at temps bordering or exceeding those likely to cause reactions with the silicone.I wouldn't mind a longer dabber tip on the Stinger dabber, but I haven't burned myself on it yet!
But, I don't leave it on for long periods of time, as I don't (yet) dab full melt.
Regarding a landing pad for the Hurricane cap, I use a couple of silicone (I know) containers: tops for flat StormCell caps, bottoms for the rounded Hurricane caps:
I've seen the faintest of translucent white residues on my HE carb before that happened this way before I stopped putting it down in my Oil Slick container (I never used cheap non-platinum cured silicones either!) - the liger carbs have a lot more thermal mass and this is more of a concern for my purposes!
Of course, as you say, you don't dab full melt and don't leave your cap on so long, so this may not be such a concern for you
To be very clear, I am talking about burns from the actual carb cap section, not the stinger handle itself getting hot! The handle isn't the part getting too hot, the problem is that the handle is so short that you are necessarily holding the handle much closer to the hot cap, and those with hands of the right dimensions will find themselves very easily burning themselves of a cap holding the cap from the handle. It is a glaring issue because all of the liger caps are much larger than any other carbs out there. If anything, the Liger caps could probably even have a longer dabber handle than other caps to prevent this problem
alittledabwilldoya'
Sapphire Powered Dabstronaut.
I have seen these pics before actually bro, but I should clarify that I do not put hot carbs down on anything silicone (I actually do not use silicone mats or containers at all, they're just not inert enough to be allowed near the material that I have worked so hard to produce!). This is because there is a possibility after a long dab that my cap will be at temps bordering or exceeding those likely to cause reactions with the silicone.
I've seen the faintest of translucent white residues on my HE carb before that happened this way before I stopped putting it down in my Oil Slick container (I never used cheap non-platinum cured silicones either!) - the liger carbs have a lot more thermal mass and this is more of a concern for my purposes!
Of course, as you say, you don't dab full melt and don't leave your cap on so long, so this may not be such a concern for you
To be very clear, I am talking about burns from the actual carb cap section, not the stinger handle itself getting hot! The handle isn't the part getting too hot, the problem is that the handle is so short that you are necessarily holding the handle much closer to the hot cap, and those with hands of the right dimensions will find themselves very easily burning themselves of a cap holding the cap from the handle. It is a glaring issue because all of the liger caps are much larger than any other carbs out there. If anything, the Liger caps could probably even have a longer dabber handle than other caps to prevent this problem
Yep, those are stock photos.
I have also used small glass jars for a similiar kind of "landing pad", but then the carb-caps tend to stick to the jars.
Monsoon
Well-Known Member
I must +1 the shortness-of-dabber issue. I only ever use a d-nail stinger dabber with the liger caps because the risk of burning one's hand on the side of a hot carb cap is very real with the shorter liger traditional-style handles; which position the side of your hand too close to the hot cap, after removal when finishing your dab.
I also don't use the hurricane cap at all lately. It is too wide, too easy to burn yourself on, gets very hot and stays that way for a long time. Due to the shape, it is also hard to put down without rolling around on a flat surface too which is a PITA with something that gets so hot! Too much of the range of movement when using the hurricane cap with a 30mm leads to an incomplete seal with the dish and leaking vapor - this may be different with the 20mm v3 though, I haven't used that one
I mentioned the dabber length to Josh and he's working on it! I'm perfectly happy using the D-Nail Fork dabber but it'd be nice to use the other ones too especially the skeleton.
LazyIdol
Well-Known Member
I ordered these in the 18mm size
http://www.dhgate.com/product/14-4mm-flared-foot-slide-holder-14mm-and/391596214.html
I originally intended to use them as stands for my liger, but they are not solid on the bottom and so tip with the weight.
They do however make excellent hurricane carb cap stands when flipped over
http://www.dhgate.com/product/14-4mm-flared-foot-slide-holder-14mm-and/391596214.html
I originally intended to use them as stands for my liger, but they are not solid on the bottom and so tip with the weight.
They do however make excellent hurricane carb cap stands when flipped over
alittledabwilldoya'
Sapphire Powered Dabstronaut.
Anyone else try the Hurricane cap upside down?:
https://www.instagram.com/p/BN0dfaMjjFm/?taken-by=hexnail
https://www.instagram.com/p/BN0dfaMjjFm/?taken-by=hexnail
Hogni
Honi soit qui mal y pense
Missing nice and useful dab-tool trays/-holder/-stands in the market. When my Liger&Co will arrive a friend of mine who is a carpenter will make one for me out of a really nice piece of wood.
Perhaps the same wood as that of the Hex-Nail? ;-)
Do you think temps of the Liger tools will get to hot for wood?
Eventually then another friend of mine who is a mechanical engineer should better make some SS inserts for the tray?
Perhaps the same wood as that of the Hex-Nail? ;-)
Do you think temps of the Liger tools will get to hot for wood?
Eventually then another friend of mine who is a mechanical engineer should better make some SS inserts for the tray?
Last edited:
Baron23
Well-Known Member
May I ask for a bit more detail. Why no recommendation on Hurricane on 20mm v2.0?
Cannabis Connoisseur
I LOVE LIFE
I'm at 575 degrees on my 30mm Sapphire V3 Beta Bucket! I still don't have the finished version.
Flavor City! Sour Cherries! 2Hole MoJo Banger Hanger!
Flavor City! Sour Cherries! 2Hole MoJo Banger Hanger!
KimDracula
Well-Known Member
I'm having a similar problem to those with the 30mm, I think. The 3.0 buckets look like they have a wider lip around the circumference which should allow for more movement of the Hurricane Cap without breaking the seal. Without this movement the additional functionality of the Hurricane is neutralized IME.
mutten840
Well-Known Member
@Cannabis Connoisseur i see you showing off mojo jojo =)
Last edited:
mutten840
Well-Known Member
So I ordered one of these to see how it works with the 30mm bucket
https://www.thedabstore.com/collections/accessories/products/idab-glass-terp-turner-carb-cap
I will report back once I have given it a once over, but it looks like it should work nicely with both the 20 and 30mm buckets
https://www.thedabstore.com/collections/accessories/products/idab-glass-terp-turner-carb-cap
I will report back once I have given it a once over, but it looks like it should work nicely with both the 20 and 30mm buckets