Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer
- Thread starter natural farmer
- Start date
@YaMon the brush took much longer than it should have because it got back back burnered by the dcup, weedeater, rosin press upgrades, & 420. The first 1/2 of 2019 has been busy for newVape. The stands and accessories are actually the fun part. My thoughts have always been that the stands are best left to the end of the initial design cycle. I feel all the heads and tools have been brought to market now and it's time to begin a layout of the new generation stand.
Basically what i'm trying to say is that all of the pieces to the puzzle are complete, now it's time to assemble it.
@Coustu the adapter is available separately and can accept any brush with a 1/8" shaft dia. I've been using the stainless steel brush with my double weave screen with no issue. The titanium brushes that I've found are super expensive. https://precisionbrush.com/side-action-tube-brushes
Although the controller might go beyond 1000f please don't do it. It's for this reason why our coils only have a 30 day warranty (1 yr on the pid). Please don't use high temps to clean your flowerpot dish. There are better ways to properly clean your flowerpot without the use of high temps, and unnecessary stress on the hardware. I consider normal uses for the pid and coil is 500 - 800f. We have yet to see any product failures with normal use in over 3 years of selling these. Please don't think that there indestructible. I do leave my WE on all day when I'm next to it and able to monitor it's safety.
YaMon
Vaping since 2010
Edwyn, that was meant as a compliment. Most companies cannot bring a product to market in 4 months! I’m excited to see what you come up with and will continue to provide feedback.
@YaMon i didn't interpenetrate any other way. Hope you have a nice weekend.
Cool! I thought I’d read on one of these forums that brushing ti with a stainless brush could cause oxidation problems but I could be wrong. I do dream about this stuf... and maybe it was a bad dream... LOL!!! I just put it on my wanted list for my next order!
PandaLee
Well-Known Member
Yeah I want that brush and the shovel with tamper. I don't tamp down to condense my flower, but instead to lightly tap around to level the bowl contents after I dump fresh grind in. I have been using a clean dab tool that I also use to stir the contents every once in a while, but I like the shape of the proposed Newvap one. If I remember correctly, it was one piece right? Shovel on one end, tamper on the other? If so, then maybe a version with a poker (stirrer) on one end and tamper on the other would also be cool.
Vaporware
Well-Known Member
It cools so fast that I just stick it back in the plastic tube after the cool
down click. If you want to put it away early, metal or wood should be fine.
I’ve been concerned about it too, originating with this advice to someone who wanted to remove the VRod nut with pliers directly on it.
nodrog
Well-Known Member
I bought one of these little dealies to use with my Weedeater, just perfect for scooping and stirring: https://delta3dstudios.com/scoop-n-stir-vape-tool/
wildman420
The Most Interesting Monkey in the World
@NewVape710 I want a stand set up for dabbing on side with the Dcup and other side for a weed eater or showered. with the appropriate stands and accessories, resin/herbs, ave, etc. I love the double email controller setup I have now. I want a very shiny stand that has EVERYTHING. I know you guys will deliver.
JackF8
Well-Known Member
For anyone who’se interested: I’ve been using these brush accessories from Dremel. They look very similar to the stainless steel brushes, but instead use nylon.
I was looking at the screw-in adapter for the brush on the new stand NV is designing, and it looks like these nylon Dremel brushes could also fit
https://www.dremel.com/en_US/products/-/show-product/tools/404-02-1-2-nylon-bristle-brushes
https://www.dremel.com/en_US/products/-/show-product/tools/405-02-1-8-nylon-bristle-brushes
thevapist
Well-Known Member
Flowerpot family of vapes are the end game. VROD has completely changed how I consume flower and concentrates. People are blown away when I show them how few pieces are actually part of the system. Just a ton of thought put into every component.
Glad I found this site! I hope you can expand your marketing and presence in general some more, as everyone I show this to or let use falls in love. I've yet to meet another person that has heard of it though. I would have never found this without traversing search engines.
Glad I found this site! I hope you can expand your marketing and presence in general some more, as everyone I show this to or let use falls in love. I've yet to meet another person that has heard of it though. I would have never found this without traversing search engines.
YaMon
Vaping since 2010
The issue with brushes is they do leave strands behind and if you do not catch a nylon strand you're vaping that.. no thanks, I'll stick with metal
Zangano Cruel
IG zan.cru (code) zancru (5% NV checkout discount)
Package arrived on Friday.
Thanks @NewVape710
All that I was expecting, and more!!!
Much appreciated!!!
Now, I can say, I mostly have, the whole New Vape family.
Almost all set up, detailing some parts...
All PIDs at on point numbers!!!!
And studio, has been rearranged, for my Instagram zancru LIVE streams.
Dracarys has been really busy lately!!!! Jajajajajaja
Thanks for all the support guys!!!
Stay vaped!!!!
Later.
Thanks @NewVape710
All that I was expecting, and more!!!
Much appreciated!!!
Now, I can say, I mostly have, the whole New Vape family.
Almost all set up, detailing some parts...
All PIDs at on point numbers!!!!
And studio, has been rearranged, for my Instagram zancru LIVE streams.
Dracarys has been really busy lately!!!! Jajajajajaja
Thanks for all the support guys!!!
Stay vaped!!!!
Later.
Last edited:
I'm using an old tea towel, seemed appropriate for wiping a dish
Also, I dont think I've ever mentioned this in thread but I too eschewed the use of the hemp wrap on the handle. I very much like the naked handle!
PandaLee
Well-Known Member
Is it easy to grab, not hot to handle? FP was my first enail so I never used one of these coils without the hemp handle!
nodrog
Well-Known Member
An observation about the Weedeater. Seems to me I'm getting different potency from different glass.
- Overall, more water should result in more THC loss from the vapor.
- BUT! I seem to get better effects from the Mobius Recurve than the Mobius Nuc, and the Recurve has far more water
- My theory is that the greater diffusion in the Nuc matrix perc vs the Recurve perc (with fewer, larger holes) exposes more of the vapor to contact with water, thus decreasing potency.
Or I'm just being imaginative and ascribing differences where there aren't any real ones.....
- Overall, more water should result in more THC loss from the vapor.
- BUT! I seem to get better effects from the Mobius Recurve than the Mobius Nuc, and the Recurve has far more water
- My theory is that the greater diffusion in the Nuc matrix perc vs the Recurve perc (with fewer, larger holes) exposes more of the vapor to contact with water, thus decreasing potency.
Or I'm just being imaginative and ascribing differences where there aren't any real ones.....
Rarely does it get that warm, certainly nothing more than nicely warm. Its never uncomfortable to touch.
YaMon
Vaping since 2010
I’d bet you also find it easier to guage the size of your hits with the Recurve? I find free flowing pieces like the Nuc make it difficult to guage hit size, which results in my being more conservative for fear I will draw too long spurring a coughing fit.
While ya buying glass, might be worth checking out the dhgate thread here on FC to get a dirt cheap back up piece!