Circa1999
Well-Known Member
Do you think getting the T-Banger attachment would be a good idea? what would be the best possible setup?
Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer
- Thread starter natural farmer
- Start date
Timps27
Feel like I’m winnin’ when I’m losin’ again
No, the B series are combos, they do both dry herb and concentrates.
I have no experience with the T-Bucket but it is a dedicated concentrate rig, and the quality from CH is top notch, I don’t think you would go wrong with it at all. That said it’s a much larger investment at $275 plus the need for a coil/PID/glass in addition. You can go quartz banger and a nice torch on the cheap side; T-Bucket is probably the high side; in between you have items like the Puffco Proxy, Puffco Peak, or my favorite the Stache RiO ($149 plus 10% off at the Stache site, can be found cheaper from resellers at times). (ETA: forgot to mention the other E-nail options outside of T-Bucket like MiniNail and others; there really are lots of options for concentrates!)
Rig-In-One
Stache Products is dedicated to offering our innovative, high-quality products to all our customers at a fair price. Stache boasts a collection of glass dab rigs, quartz nail bangers, vape pens, and our Rig-in-One, unique DigiTül and new grinder: the Grynder!
greenganja
Well-Known Member
You would need the B2 if you wanted to use concentrates with it. The B0 and B1 are only for flower use. The B2 works great. However, you could save yourself a lot of money buy getting a cheap quart banger to use with your 14mm glass piece if you already have a 14mm glass piece. You would also need a torch. Of course there are many different options when it comes to torches. I personally use a Blazer Big Shot torch but they are $$. If you aren't wanting to spend a lot of money, then consider either a chef's torch for making creme brûlée or a torch from Home Depot or Lowe's.
what is the difference between those two? (sorry for veering OT)
B0 is injector style and the "budget" option, it also has an exposed coil.
B1 can be either Injector or Diffuser Style, its a bit more expensive and has a contained coil and can hold more balls.
Flowerpot B-ZERO Head | Cannabis Hardware | Cannabis Hardware
* If you purchase this and a coil separately, please leave a note to staff during the order process, if you would like it assembled. (both items must be in your order) The Flowerpot B-Zero is the latest iteration of the "B" series of heads. This time, it is a single piece "ball" device inspired...
Flowerpot B1 "Injector" Head | Cannabis Hardware
Features: - Grade 2 titanium - Flower Only - Coil not exposed, better heat sink. - Airflow restriction from 3/4" on the intake side (top) down to 5/8" on the injector side. - Houses 3mm or 4mm ruby balls. - Made in Boynton Beach, FL ABOUT THE B1 INJECTOR HEAD The B1 Injector is an addition...
Flowerpot B1 "Standard" Head | Cannabis Hardware
Features: - Grade 2 titanium - Flower Only - Coil not exposed, better heat sink. - Largest airflow column at 3/4" - 22mm Diffuser accepts mesh or machined screens. - Houses 3mm or 4mm ruby balls. - Made in Boynton Beach, FL FlowerPot "B1" Baller Head Assembly The B1 nut has a groove over the...
Timps27
Feel like I’m winnin’ when I’m losin’ again
Also, you can drop a dab on hot balls in a B0/B1 (or Quaroma, etc.); it’s just not ideal. Probably not any less ideal than a B2 head at flower temps though; anything other than a dedicated concentrate rig is going to be a compromise of some sort.
greenganja
Well-Known Member
Honestly if I use concentrates most of the time it's on the mininail. Timps is right about doing double decker's. The temperature that you would need for your concentrate would be too high for flower use imo. You can do it with the B2. I just prefer to use a dedicated oil rig or something.
How many are you looking to get? I've got kilos is SiC Ave Zirconia on the way as we speak, I can guarantee I'll have cheaper pricing than anyone
ontopofclouds
Well-Known Member
if you want to stay with cannabis hardware and you want a setup for concentrates the t-bucket is the best possible setup
Circa1999
Well-Known Member
Thank you, I think that's the route I will go then!
Alligator427
Well-Known Member
For the people who want the glass bowl in EU
www.docteur-vaporisateur.com
18.8mm FlowerPot Standard Glass Bowl - Cannabis Hardware
Acheter 18.8mm FlowerPot Standard Glass Bowl Cannabis Hardware pas cher. Achat accessoires pour vaporisateurs FlowerPot B1/B2 au meilleur prix !
Mndeadhead
Well-Known Member
Have any FPP owners tried out the water cooling module available on the site now? Here is the link for reference. For me, my my one complaint of the FPP has been the growler. I just don't love it. Can't find the sweet spot on the hit, and it doesn't cool a ton. I saw the cooling module and figured for $36 it was worth the gamble. It came in the mail day before yesterday. Best $36 I have spent. I pair it with my GooRoo Glass mouthpiece that has an 18mm male end, and I am extremely happy. Great flavor, better cooling, and more substantial hits. Highly recommend checking it out if you have had mixed results with your growler, or just want to mix things up. Check it out here: https://www.cannabishardware.com/co...ducts/glass-cooling-modules-for-flowerpot-pro
Dankvinci
Well-Known Member
it looks awesome!!! I only have a b2, I wish I had an adaptor cooling piece for my system.
Timps27
Feel like I’m winnin’ when I’m losin’ again
The only thing special about this version is it’s female-female for the specific application, you can get them in any combination of 14/18 male/female to adapt to any setup you have. You can find them on DH/Ali as well if you want a cheaper price.
Socks And Sandals
Well-Known Member
Oh i dunno just yet and it will be a while. Prob the same amount CH gives us to fill the B2 in that little baggie. I'll hit you back in the PM.
Loving my T bucket but finished the rest of my shatter til next month. I've been letting it sit on the heat post waiting for that color to pop out. I prob wont re up till the end of April and am sitting on an ounce and a half at the moment.
Did you crank it up to 900?
I put mine at 850 and then hit it with the torch to get to those higher temp colors
I then proceeded to drop it on the carpet and ruin everything
Last edited:
Socks And Sandals
Well-Known Member
I have it at 550.. at 550f it gets almost too hot for my glass or so it seems. Since I found 550 a nice low temp dab.. I've been using the same temp on the post. If I want it to be a gradual color change.. should I keep this temp? I never ran the T bucket pass 600F. Seems that is almost too hot for my live shatter. Maybe I should run it higher while it sits on the post.. I just want to make sure it's not too slow of a change but gradual at the same time mainly because I've been told here that after that blue stage.. it turns silver again. I think once it turns from purple to blue, I'll stop heat soaking it on the post to give me some more time to enjoy it while blue.Did you crank it up to 900?
I put mine at 850 and then hit it with the torch to get than mmose higher temp colors
I then proceeded to drop it on the carpet and ruin everything
LOL sounds like me.. I should show you a picture of my old Vrod... I swear all I did was accidentally drape a micro fiber cloth over it.. Looked like it was dipped in cat hair and shit!
Microfibers embedded all into the TI and the rim of the dish. I buffed it up some and it looks pretty presentable now so I can sell it soon along with that Omnivap which I haven't got around to yet.Lets hope that doesn't happen again, I'd be mighty pissed..
Oh I'm not using it at those high Temps, I would out it that high for an hour or so just to get the colorI have it at 550.. at 550f it gets almost too hot for my glass or so it seems. Since I found 550 a nice low temp dab.. I've been using the same temp on the post. If I want it to be a gradual color change.. should I keep this temp? I never ran the T bucket pass 600F. Seems that is almost too hot for my live shatter. Maybe I should run it higher while it sits on the post.. I just want to make sure it's not too slow of a change but gradual at the same time mainly because I've been told here that after that blue stage.. it turns silver again. I think once it turns from purple to blue, I'll stop heat soaking it on the post to give me some more time to enjoy it while blue.
LOL sounds like me.. I should show you a picture of my old Vrod... I swear all I did was accidentally drape a micro fiber cloth over it.. Looked like it was dipped in cat hair and shit!
Lets hope that doesn't happen again, I'd be mighty pissed..
The Stray Fox
Separated from the group
I remember this well. We’ve all come along way since then.
viceroy420
Well-Known Member
how much for enough 3mm SiC to fill a b1?
I would try tapping it sideways a on something to see if that loosens it up. If that doesn't work, try adding some heat to it with either the Injector you use or some other form of heat, while giving it a little wiggle.We always hand tighten the handle that holds these together, but somehow they are frozen together. Amy tips?
Well, I failed at inserting a pic!
It's the 14mm male post frozen into the shovelhead bowl
GratefulDread
Well-Known Member
Happens to mine all the time when I leave the heater sitting on the bowl; it's honey buildup.
I put the heater back on the empty bowl and let it warm up, remove the handle and drop it in some iso for a few mins.
I put the heater back on the empty bowl and let it warm up, remove the handle and drop it in some iso for a few mins.