Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer
- Thread starter natural farmer
- Start date
Likes2vape
Well-Known Member
I agree $25 from China is super expensive. They look nice though.
bizwaxzion
Enigmatic Cannabist
If that's to me, the link is in the post (the word 'these').
https://www.dhgate.com/store/product/22mm-glass-bowl-for-new-vaporizer-popular/414483271.html
Likes2vape
Well-Known Member
The link you posted is for the bowls stocked in the US. They have another listing for bowls shipped from China for much cheaper
https://m.dhgate.com/product/pluspl...rizer/414482644.html#s1-16-1;searl|3090048143
https://m.dhgate.com/product/pluspl...rizer/414482644.html#s1-16-1;searl|3090048143
Justpassedu
Well-Known Member
These are the same bowls I had posted a few pages back with Ebay links and China and U.S. shipping options. I think they are even cheaper also on Ebay . Just a heads up .
bizwaxzion
Enigmatic Cannabist
ahhh - sorry for the repost. I've not been following this thread too much recently, but the news of the vrod has me contemplating an FP purchase again. I just happened to come across the listing while checking my favorite DH vendors new listings.
Justpassedu
Well-Known Member
It's ok this is just the Dhgate link , I never posted that one and rather posted the ebay links but good looking out, just wanted to let everyone know it is the same bowl though thats all.
Still my favorite FC thread. Such Positivity!
Currently, the only thread I look at
Been that way for a while now.EDIT: Forgot to mention, I'm now down at 560f dabbing rosin on the SH. Working fine for my tiny dabs. @biohacker mentioned dab size/temp, and that made a lot of sense. I was going a little too big for the low temps.
Last edited:
LabPong
Well-Known Member
All this talk about the VROD makes me happy I got an extra flowerpot showerhead instead.
I ordered the head for 420...... Glad I did not wait and get the vrod. I don't do dabs.....so no need. I also like the ability to use the showerhead on any glass bowl....even my Arizer WPA if needed. Turning the head upside down is a +++ for me like this.
I just love glass bowls for clean unadulterated taste!
Lozo
Well-Known Member
OK I gave in, Showerhead starter kit ordered...... I wanna join in the fun here and not just read about it. Decided on the SH as opposed to VRod due to stock and the fact I really only use flower, ordered the 14mm Male shovel head option but thought I might as well add tge additional 18mm post too to give me a few options for glass.
ParanoidAndroid998
Well-Known Member
Welcome to the FP club. Today is the first day of your new and improved life.
Dude, it's mine as well. Which makes it even WORSE! I mean okay- allergic to all my favorite foods. Okay np. Allergic to cannabis. Okay np. Allergic to me favorite VAPORIZERS!Still my favorite FC thread
![:\](/i/s/hmm.gif "Hmm :\")
Okay np...But PLEASE don't take my favorite thread away from me to by making me allergic to THIS vaporizer.
But they did, the bastards!
Which is why I have to keep making up reasons to come back here, case in point.
hoyo77
Well-Known Member
I have the showerhead....its is the bee's knees when i comes to vaping flower....if you dont mind can you link the glass bowls....need to get a couple since i cannot get a vrod. that should calm my VAS for now.All this talk about the VROD makes me happy I got an extra flowerpot showerhead instead.
I ordered the head for 420...... Glad I did not wait and get the vrod. I don't do dabs.....so no need. I also like the ability to use the showerhead on any glass bowl....even my Arizer WPA if needed. Turning the head upside down is a +++ for me like this.
I just love glass bowls for clean unadulterated taste!
I discovered the high five hybrid nail sic dish (and their carb cap made for the nail) fits perfectly on the V-Rod the SIC dish is a little more shallow which I find works pretty well actually. I've been waiting for the newvape site to update with the $20 sic dishes they're going to have and I've been sitting on this the whole time in a drawer ready for sale.
I like the performance for dabs much better with sic on this.
https://imgur.com/a/So5G6zi
I like the performance for dabs much better with sic on this.
https://imgur.com/a/So5G6zi
YaMon
Vaping since 2010
So my ShowerHead sticks to my post upon initial heat up, and as many others have posted a little wiggle and it comes right off. It does not stick after that. I'm wondering if the inside diameter (ID) of the nut and the outside diameter (OD) of the posts and the bowls is uniform. I don't have any calipers, but will borrow some and post the results soon. Respect! -YaMon
Grifo
Well-Known Member
They said in 2 days on instagram
Likes2vape
Well-Known Member
NewVape posted on ig that vrods will be back in stock in 2 days and they have removed the center hole
https://instagram.com/p/Bj-z1BQn4KG/
Edit: @Grifo beat me to it
https://instagram.com/p/Bj-z1BQn4KG/
Edit: @Grifo beat me to it
Zangano Cruel
IG zan.cru (code) zancru (5% NV checkout discount)
Part of my rigs are still in no vaping condition.
Today I took a couple hours to clean the ones I use the most... and my favorite, OG Möbius Clear Matrix, looks on fire...
As uncle @Stu remind me several times, to clean them, and as I was cleaning them, I found a very useful loading tool imo...
Cheap, fits everywhere and you can even dab
Recommended by Stu as well, an spatula...
Sitting at the left of the VROD stand...
So clean and ready, “chicken legs” is grasping for vapor...
“chicken legs” is choking in vapor...
Part of the “clean family” lineup...
@NewVape420 @newvape918 @NewVape710
A part of my “clean glass family” totally approves and appreciate the NV FP VROD.
Stay vaped...
Today I took a couple hours to clean the ones I use the most... and my favorite, OG Möbius Clear Matrix, looks on fire...
As uncle @Stu remind me several times, to clean them, and as I was cleaning them, I found a very useful loading tool imo...
Cheap, fits everywhere and you can even dab
Recommended by Stu as well, an spatula...
Sitting at the left of the VROD stand...
So clean and ready, “chicken legs” is grasping for vapor...
“chicken legs” is choking in vapor...
Part of the “clean family” lineup...
@NewVape420 @newvape918 @NewVape710
A part of my “clean glass family” totally approves and appreciate the NV FP VROD.
Stay vaped...
Lozo
Well-Known Member
Hey @Zangano Cruel they look great, might be a stupid question but what liquid is in your glass? Just bought a double UFO Perc Bong, seemed OK for cleaning and price was OK too. Now just waiting on the hardware to be delivered Can't wait to try the SH but I know it'll be a few weeks with postage and customs etc
Can't wait to try the SH but I know it'll be a few weeks with postage and customs etc
ParanoidAndroid998
Well-Known Member
Part of my rigs are still in no vaping condition.
Today I took a couple hours to clean the ones I use the most... and my favorite, OG Möbius Clear Matrix, looks on fire...
As uncle @Stu remind me several times, to clean them, and as I was cleaning them, I found a very useful loading tool imo...
Cheap, fits everywhere and you can even dab
Recommended by Stu as well, an spatula...
Sitting at the left of the VROD stand...
So clean and ready, “chicken legs” is grasping for vapor...
“chicken legs” is choking in vapor...
Part of the “clean family” lineup...
@NewVape420 @newvape918 @NewVape710
A part of my “clean glass family” totally approves and appreciate the NV FP VROD.
Stay vaped...
...exquisite....
Not a stupid question at all ... gone into detail in another thread ...
Cranberry extract (or rezblock if you want to pay for the overpriced one
)I use the "Botanic Choice" ones as they are economical
(I bought a 5 pack for like $30 years ago and still haven't run out ... but this year or early next year I'll need to re-order! ...)Ingredients on the label say:
- Cranberry Extract
- Purified Water
- Vegetable Glycerin
- Citric Acid
Helps keep your glass cleaner longer, and makes it easier to clean as well.
On another note, for those with the head sticking to the post, the solution is to not let it sit to far down on an angle. For example, if I have the cable sitting right so it's holding the had more "flat" as opposed to tilted on the post, then it never sticks. This was annoying though, as I had to place the cable in such a way that it would support the head handle ever so slightly to keep it more horizontal as opposed to slightly angled. So I thought I'd put a little "hook" to support the handle while on my makeshift stand, and that way I never have to worry about sticking. Cut a little scrap piece of oak, drilled a hole than cut the stick in half through the hole (to make the half hole at the top as the rest), cut it to size, and screwed it in to the side of my makeshift stand to support the handle. No more sticking
Period 