Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer

Shooby

Shooby

4ShOObY3 - IG
Danksta said:
I'm looking forward to SH/VRod comparisons once you guys get your units in. I still think my other gear will be better for oil and I'll remain just using the SH for flower...BUT I'd love to be swayed! :brow:
Click to expand...

Me too. I seldom use the Dnail Wrap Around, maybe like 2 or 3 times in 2018. But use the showerhead more frequently like nearly daily. Having to deal with the coil for the vrod is currently my turnoff for now. But like the man said above, i'd love to be swayed!
 
M

MAbud

Well-Known Member
Justpassedu said:
Most coils come straight , they either bent it themselves or it happened during shipping. Nothing to worry about and if you like it bent you can keep it that way. if not just slightly and slowly bend it straight by hand .
Click to expand...

Sounds like Auber does this purposely. Here was the response I received from them:

“Thanks for contacting us. Sorry for the confusion. We purposely bent the coil so the arm and the cable won't sticking out too much nor the weight of the cable won't drag the glass down. Does this configuration work for you? If not, we can help you straighten it. Or if you prefer to return it, we can also arrange that.”
 
YaMon

YaMon

Vaping since 2010
Geesh, bad enough being in Jamaica under the hot sun without #FlowerPower, but then to add insult to injury I come back to VRod being released and 23 pages of posts to catch up on! You guys are killing me! Respect! - YaMon

Edit: And oh boy did I miss my FlowerPot!
 
Zangano Cruel

Zangano Cruel

IG zan.cru (code) zancru (5% NV checkout discount)
Hola FC and FCers:
I’m so anxious about the VRod I ordered this Monday the 21st of May.
I really thought they were ready to ship.
Well, probably better, I’m thinking I’m liking the looks of the Panhead instead of the Shovelhead, after watching that last @NewVape420 cool video update.
Can’t wait to get my hands on the VRod Starter Kit, +28mm D-Nail SiC dish insert + 2 extra 28mm quartz, double weave Ti screen... and match it with my old reliable OG Mobius Clear Matrix bubbler.
Haven’t been so excited since my Early Bird IndieGoGo Cloud EVO or OG Milaana pre-orders.
Thanks again to all this great forum, since 2010 I’ve been being educated in the art of “vaporizing” our favorite herb.
Salud to everyone.
Best,
Z.C.
Stay vaped... Happy 420 page!!!
 
Last edited:
WelshBrok

WelshBrok

Well-Known Member
newvape918 said:
They are all set to ship by weeks end (today and tomorrow). Making some last second tweaks. You guys will get them right out of the oven. I know everyone is anxious, and we are too for you to have them!
Click to expand...

Do I hear custom early adopter engraving lol!? (Joking)

Thanks for the information, don’t mean to be impatient, just excited for the vrod!
 
WelshBrok,
  • Like
Reactions: JCat
JCat

JCat

Well-Known Member
Accessory Maker
newvape918 said:
They are all set to ship by weeks end (today and tomorrow). Making some last second tweaks. You guys will get them right out of the oven. I know everyone is anxious, and we are too for you to have them!
Click to expand...
Hopefully this will include mine placed Tuesday morning too! :lol:
 
JCat,
  • Like
Reactions: graydeh1
LabPong

LabPong

Well-Known Member
Pyr0 said:
Received a couple of bowls from DHGate
ITWVjRf.jpg

Unfortunately I don't have my flowerpot with me @ work lol so no testing until later :p
Click to expand...


Can you take a picture looking down into it...and one from the bottom?

Also, how does the showerhead fit on to it...perfectly with room to not catch putting on and pulling off?







I just used the Elev8r bowl again with flower after not using it for a long time. Yes, it is not extracting to full extent. I used it at 580F with an RDK300 and auber coil with my showerhead. Without upping the temps and defeating the purpose of taste with full extraction.....I think the height is one thing....but the way the Elev8r bowl has a narrow pinch exit through the bottom of the screen to the joint below.....and also the shape of the bowl from top to exit...is more of a factor.

I found the best is to have the airpath go from wide at the top and narrow down consistently as possible to the exit below the screen. Some bowls like these have different shapes of width at the screen because of they way they are made. Some have big bubbled out areas where the screen sits that is much wider than the top entrance of the bowl. These make the air go around the load more rather than straight down through the centered area.

When you switch around with different glass bowls......run a hit or two back to back that are ....stronger and try to get some 'hot spot's' in the load...then notice where the dark area is in comparison to other parts of the load on top. This is why I stir after almost every draw, it is so easy too.

Ujzrdv0.jpg
 
P

Pyr0

Stoned Roses
LabPong said:
Can you take a picture looking down into it...and one from the bottom?

Also, how does the showerhead fit on to it...perfectly with room to not catch putting on and pulling off?
Click to expand...
Here's a pic of it from the top
https://i.imgur.com/eweA94W.jpg?1
and from the bottom
https://i.imgur.com/DyYP3iX.jpg?1

The bowl I've been using fits and works well, no issues with placing and removing the flowerpot head...
But I've just tried the other one and found it's a fraction too large, so it sticks in the Flowerpot.

I guess I was just lucky I grabbed the one that fitted first time lol
 
szai

szai

Well-Known Member
Does anyone know if the hex nail red queen will for in the battery chassis? Thanks!
 
szai,
LabPong

LabPong

Well-Known Member
Pyr0 said:
Here's a pic of it from the top
https://i.imgur.com/eweA94W.jpg?1
and from the bottom
https://i.imgur.com/DyYP3iX.jpg?1

The bowl I've been using fits and works well, no issues with placing and removing the flowerpot head...
But I've just tried the other one and found it's a fraction too large, so it sticks in the Flowerpot.

I guess I was just lucky I grabbed the one that fitted first time lol
Click to expand...


Very nice...thanks. They did a great job on it.....ordering a couple now after seeing this. I love the center hole and limited pedals on the glass screen. And super free flowing with no air pinches or radical curves. Should work awesome.

Oh yea.....but how does the showerhead piece fit over it?
 
szai

szai

Well-Known Member
just_the_flu said:
...until they upgrade hex to run through AP mode imo it's useless as a 'portable' unless your happy with last setting...
Click to expand...

Fair enough but I don't have it yet and hopefully that feature will work by then. Though I thought you could use it through a tethered phone?
 
just_the_flu

just_the_flu

they say im crazy but i have a good time
JCat said:
Does it not also have a screen? I thought the UI was also available on a touch screen built-in to the unit? (I know we're getting way off topic here!)
Click to expand...


...that would be the hn-01 aka skynet, the hn-02 aka red queen is totally screen less. it HAS to be operated over wifi with internet connection via a web app (phone/tablet/pc)...
 
graydeh1

graydeh1

REP for TRVP ATTY, Shellshock/Tectonic and more.
Company Rep
I bought just about a month ago and hadn't cleaned even once, I thought it was working pretty well and it was but holy sheep shit Batman, I just jerked off with my other hand...
I gave her a good little ISO bath last night and fired her up after work. I'm having the amazing euphoria like the first day I got it.
 
graydeh1,
  • Like
Reactions: JCat
530rasta

530rasta

Well-Known Member
my SiC dish didnt last long before what looks like peeling or some sort of degrading of the outter layer, I was wondering if its pure SiC or just coated aluminum? I see scratches from the provided Ti dab tool for sure, so avoid that on both the Sic and the quartz dish.
 
530rasta,
You must log in or register to reply here.
Top Bottom