Arizer Solo

syrupy

Authorized Buyer
41xHmoKKBBL.jpg


Edit: At first I tried to photoshop a Solo over the beer glass, but it wasn't pretty....
 

lookhigh

FC member
I never save reclaim and I keep my glass super clean.
My shatter is pure and super clean.
I'm out of my favorite strain and that's OK. I have plenty to get me buy until Monday. No milk laced with stem oil.
However pure white frosty colas made by GOD the creator of all things.

That GOD he gave man the wisdom to make a SOLO so we can consume COLA FLOWERS.

Enjoy your day!
What no pool shot to tempt us.:D
We are having a small heat wave in Ireland at the mo, so would like to see more pool action.:nod:
 

od88

Well-Known Member
I've been having a major issue with using my Solo on the PA. I have to keep playing with the plug position to get it heating, and one bad movement will reset it. The connector for my plug was chipped so I figured that was obviously the problem and ordered a couple new plugs from China. Unfortunately, only one worked and even that was acting up just like my previous chipped plug head. The new ones fit nice too, so I'm at a loss whether I should buy a new PA or a new Solo... any input is appreciated, thanks.
 
Last edited:
od88,
  • Like
Reactions: OF

Dr. Soxhlet

SOLO Vaporized Cannabis is my Best Medicine
I've been having a major issue with using my Solo on the PA. I have to keep playing with the plug position to get it heating, and one bad movement will reset it. The connector for my plug was chipped so I figured that was obviously the problem and ordered a couple new plugs from China. Unfortunately, only one worked and even that was acting up just like my previous chipped plug head. The new ones fit nice too, so I'm at a loss whether I should buy a new PA or a new Solo... any input is appreciated, thanks.

I had a problem with my first Solo. The plastic tip on the power supply connecter came off inside the Solo, preventing any other power supply to be used. I had to sand down the plastic tip on each power supply that was to be used on the Solo.
The unit failed due to some other problem, so I sent it in on warranty. You might check your connection in the Solo to see if this may be the problem. I was never able to remove it is why I modified the other connections.

Heat Wave? It rained here!! I even started the fire last night.:doh:
 

OF

Well-Known Member
Unfortunately, only one worked and even that was acting up just like my previous chipped plug head. The new ones fit nice too, so I'm at a loss whether I should buy a new PA or a new Solo... any input is appreciated, thanks.

Bummer. Sounds to me like the male connector in the Solo base is fungoo. Perhaps in the same mishap that chipped the plug? I seriously doubt a new PA will be useful.

Resets are the result of 'drop outs', that is a momentary break in contact. If charging this is not a big deal of course, but I bet you see resets in the charging if you wiggle things?

That connector is probably covered under warranty? Otherwise you're in some trouble since a new one will not have (true) PA as an option. But, of course, 'use as you charge' is a big step up from 'use as long as you don't move'.

Good luck with it.

The plastic tip on the power supply connecter came off inside the Solo, preventing any other power supply to be used. I had to sand down the plastic tip on each power supply that was to be used on the Solo.

Bummer, but not all that rare a problem. Next time you might consider a 'tech trick': Bend a small hook in a needle or safety pin tip, heat it up 'red hot' and hook into the plastic before it cools. You can usually 'unscrew' or fish out the broken piece once you can hook into it.

OF
 

od88

Well-Known Member
I had a problem with my first Solo. The plastic tip on the power supply connecter came off inside the Solo, preventing any other power supply to be used. I had to sand down the plastic tip on each power supply that was to be used on the Solo.
The unit failed due to some other problem, so I sent it in on warranty. You might check your connection in the Solo to see if this may be the problem. I was never able to remove it is why I modified the other connections.

Heat Wave? It rained here!! I even started the fire last night.:doh:

Thanks. While I'm not seeing a piece stuck in there, that sounds just like my connector and I had actually considered sanding it down but wasn't sure if that would help. Nice to know and I'll give that a shot.

Bummer. Sounds to me like the male connector in the Solo base is fungoo. Perhaps in the same mishap that chipped the plug? I seriously doubt a new PA will be useful.

Resets are the result of 'drop outs', that is a momentary break in contact. If charging this is not a big deal of course, but I bet you see resets in the charging if you wiggle things?

That connector is probably covered under warranty? Otherwise you're in some trouble since a new one will not have (true) PA as an option. But, of course, 'use as you charge' is a big step up from 'use as long as you don't move'.

Good luck with it.

OF

Right on OF, charging wasn't even a noticeable problem until yesterday it was left uncharged and realized that too is affected from wiggling. The new Solo is definitely a step up from this delicate setup haha I know it's inevitable I'll own one and I may just get that out of the way. But right after I posted that, I remembered I didn't throw away my old PA that was showing life after cutting off the plug. Out of random desperation, I took the non-working plug from China and spliced it together with my old PA. I can't believe it, but this seems to be working perfect.
 

vii

Well-Known Member
just got my 18mm fbomb tube from planet vape.its a awesome water tool.fbomb is much more smoother than my last bubbler and im done after two session.very secure and sturdy connection with gong.this my first time ordering from planet vape.is it normal to a bag of doritos with your order?
 

Quetzalcoatl

DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
just got my 18mm fbomb tube from planet vape.its a awesome water tool.fbomb is much more smoother than my last bubbler and im done after two session.very secure and sturdy connection with gong.this my first time ordering from planet vape.is it normal to a bag of doritos with your order?
That's their way of saving on packaging materials while keeping weight down and giving us something to eat when we're done experimenting ;)
 

Quetzalcoatl

DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
Only here in Vapeland does eating potato chips go with "keeping weight down"........

OF
Us cannabis connoisseurs are a special bunch :D

In other news, I just hit some kief and got ridiculous clouds. Feelin' it in the eyes and back :ko: Got this Master Diesel (Master Kush x Sour Diesel) for later. Should be interesting, I was trying to find a hybrid that I would be able to vape and not go comatose after 30 minutes.

I left my Solo plugged into the PA last night, went from 6 to 5 LED's overnight after a lot of use since the last charge.
 

Ano

FC Lover
In other news, I just hit some kief and got ridiculous clouds.
How do you vape kief with your Solo ?
I have some but I didn't bother trying to find a way to use it in the Solo as I already get some pieces in my mouth when vaping fine grinded flowers (MFLB fine), even with an "extra fine" screen from PV.
 

Quetzalcoatl

DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
How do you vape kief with your Solo ?
I have some but I didn't bother to find a way to try it in the Solo as I already get some pieces in my mouth when vaping fine grinded flowers (MFLB fine), even with an "extra fine screen" from PV.
Really? Hmm. I have this really really fine mesh that I re-purposed from a broken object. It's actually fine enough that I can just put kief on top and vape it with very little to no kief going through. The trouble parts are around the screen, if it's not flat it could let some through. Whatever does go through ends up stuck in the reclaim oil inside my GonG, which gets scraped and vaped ;)

That's for just kief. I also like mixing flower with it, layering it and then stirring after a few hits, and rolling oils in it :D

I wish I could easily figure out the micron size of the screen I have so we could just buy sheets of it online :/ I do know that this one (naturally) clogs faster than the other screens.

"Special".......that means we take the short bus to school?

Yep.

OF
Mr. Wizard over here... I actually did have to take the short bus to high school, only because of the road going to school. There were a few incidents of the regular buses getting stuck on curbs on the side of a 200' drop :uhoh: :rofl:
 

OF

Well-Known Member
I wish I could easily figure out the micron size of the screen I have so we could just buy sheets of it online :/ I do know that this one (naturally) clogs faster than the other screens.

This one's easy. Count the number of cross wires on the longest wires (the ones that run the full diameter), that and the diameter will do the deed.

I actually did have to take the short bus to high school, only because of the road going to school. There were a few incidents of the regular buses getting stuck on curbs on the side of a 200' drop

Yeah, yeah, sure, sure....... Were you really able to sell that one to the babes back then? I hear the choppin', I see the chips......

OF
 

Quetzalcoatl

DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
This one's easy. Count the number of cross wires on the longest wires (the ones that run the full diameter), that and the diameter will do the deed.



Yeah, yeah, sure, sure....... Were you really able to sell that one to the babes back then? I hear the choppin', I see the chips......

OF
I could read you your tax returns and you'd fall in love with me ;)

Here's an old macro I took, for what it's worth.

QW6kO6D.jpg



Kief (from Arabic تكيف (kayf), meaning "well-being, pleasure"[1]) :)
 

OF

Well-Known Member
I could read you your tax returns and you'd fall in love with me ;)

Here's an old macro I took, for what it's worth.

Near as I can make out, it's either 80 or 100 mesh, assuming it's 1/2 inch? Kinda hard to count in that photo.

I'm not sure there's anything in my tax returns to fall in love with, plenty to get upset over, but not much to be happy about.......

OF
 

SunnyHours

Well-Known Member
After 1 Year 7 Months and 19 Days (596 Days) I can say that this machine worked and still works like a charm. Battery life is still pretty decent, I actually wonder if I've lost any...supposed to at this point in time.
The only issue I had and still have from time to time is with the charger, sometimes it goes on a loop and doesn't charge. Plugging and unplugging the charger a couple of times usually does the trick.

:leaf:

So after I received it at first there was a bit of a learning curve to it, I had to adjust to the restricted air draw but after that it was smooth sailing! It still doesn't disapoint and it's still going strong after a Year and Two-Thirds. Easy to clean and charges quickly! I recommend it to any beginner and experts alike :myday:

:bigleaf:
 

Quetzalcoatl

DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
Yeah apparently the lady in the back actually packed the oven and then put the stem in, lol... Cool to see stuff becoming more mainstream.

I started getting really bad nausea earlier and then started getting vertigo about 5 minutes in. Good thing I had everything on my desk already, three stems in and I'm in the clear for now. I just had my first day of summer classes, too. 25 pages to read for tomorrow which wouldn't be too bad but it's Hippias Minor (Plato) so I'm sure I'm going to get a bit confused somewhere.
 

tqbf

Well-Known Member
Has anyone found a DHGate PA (or some other cheap pa) for the arizer solo? I mean, it doesn't seem proprietary.
 
tqbf,
  • Like
Reactions: Pipes
Top Bottom