Anvil by Vestratto

noobvaperct

noobvaperct

Well-Known Member
So my WPA kit finally came in today (yay), but I have the dumbest question to ask. How do I disassemble to clean it? I don’t want to start pulling on stuff hard and breaking something before using it and all I can remove is the bowl which is the obvious piece. But does the rubber disc come off? Does anything else disassemble so I can soak it in iso before using?
 
noobvaperct,
G

Gdash

Well-Known Member
noobvaperct said:
So my WPA kit finally came in today (yay), but I have the dumbest question to ask. How do I disassemble to clean it? I don’t want to start pulling on stuff hard and breaking something before using it and all I can remove is the bowl which is the obvious piece. But does the rubber disc come off? Does anything else disassemble so I can soak it in iso before using?
Click to expand...

I remove the bowl and hold the wpa and pull on the heater which comes out with the condenser. The condenser will then be lose to just pull out of the heater and you are good to clean it. You won't break it. To reassemble I place the condenser into the heater, put the bowl on and push it back into the wpa.
 
noobvaperct

noobvaperct

Well-Known Member
Gdash said:
I remove the bowl and hold the wpa and pull on the heater which comes out with the condenser. The condenser will then be lose to just pull out of the heater and you are good to clean it. You won't break it. To reassemble I place the condenser into the heater, put the bowl on and push it back into the wpa.
Click to expand...
Okay, so to confirm, the body part that has the rubber disc around it doesn’t come apart, the disc is fixed and that whole part cannot be cleaned?
 
noobvaperct,
hotmeals

hotmeals

Serial vapist
Whiff said:
Also to everyone who purchased a Tornado/forge bundle, The tornado is still being tested and stuff. Vestratto would like to know if you would like them to ship your Forges in advance. If so please email mumfordjohn7@gmail.com with your Order # and they will start working on shipping the Forges out.
Click to expand...
Does that include everyone who ordered after 4/20 who were expecting a later shipment anyway?
 
hotmeals,
Kreator87

Kreator87

Well-Known Member
TangibleHangnail said:
I'm really enjoying my Anvil. I got the duracore version last year when I was still too inexperienced and couldn't appreciate it, but the thermocore is working great for me.

But I'm used to straw-loading most of my other regulars (DVs, TM2), so having to use a tiny scoop is a step backwards. What's the best way you've found to load it?
Click to expand...
I just put it in the grinder and scoop up what I need with the bowl directly and tamp with my finger. If they made little covers for them, they would be like dosing capsules, expensive ones, but I'd still be into it.
 
Kreator87,
  • Like
Reactions: hotmeals
noobvaperct

noobvaperct

Well-Known Member
My own personal short and sweet review of the WPA Kit: it’s awesome. It definitely packs a punch for having such a tiny bowl (I bought the XL bowl and this is someone who is used to the shovelhead from the Canabis Hardware B1). I was always curious about the anvil because I have a Simrell MVS and always got pretty obliterated from a bowl from that, this seemed like a step up in intensity and tech/craftsmanship. I haven’t vaped in a week and did one bowl last night and was floating in outer space. This is also my first butane vape.

One question for you all, how or what tool do you use to push the condenser firmly back down the stem after a cleaning session?
 
noobvaperct

noobvaperct

Well-Known Member
TangibleHangnail said:
I just screw in a bowl and that keeps it in the right position. And I wax the o-rings, long time dynavap habit
Click to expand...
Thank you! Last dumb question. Since I was first a dynavap and Simrell user in the past, I believe I read that you were not supposed to submerge those caps in iso because it could damage the mechanism or something, is there truth to that? And how do we clean the Anvil bowl without messing with it long term?
 
noobvaperct,
  • Like
Reactions: hotmeals
Electrofever

Electrofever

Well-Known Member
Every part of the Anvil can go in Iso except the heat shield, that has a non Iso o-ring. Caps can go in Iso too, but you must dry them really well after, especially if you rince them with water after, to avoid any rust or things like that. A good heating with an empty bowl is a good way for drying everything !
 
Roffa

Roffa

Well-Known Member
TangibleHangnail said:
I'm really enjoying my Anvil. I got the duracore version last year when I was still too inexperienced and couldn't appreciate it, but the thermocore is working great for me.

But I'm used to straw-loading most of my other regulars (DVs, TM2), so having to use a tiny scoop is a step backwards. What's the best way you've found to load it?
Click to expand...
I don't grind and I load it with small nugs. For this, the tweezer tool on my victorinox knife is excellent. Also, the small screwdriver fits the the hex on the bowl, which is a great help if a bowl "sticks"
 
noobvaperct

noobvaperct

Well-Known Member
Electrofever said:
Every part of the Anvil can go in Iso except the heat shield, that has a non Iso o-ring. Caps can go in Iso too, but you must dry them really well after, especially if you rince them with water after, to avoid any rust or things like that. A good heating with an empty bowl is a good way for drying everything !
Click to expand...
Awesome, thank you!
 
noobvaperct

noobvaperct

Well-Known Member
For those of you who have the Reload Gen 2 from Madheaters - is it really for those who go back to back bowls with the Anvil? I love how I can draw twice with my XL bowl and the AVB is perfectly toasted, but so am I in a few minutes.
 
LordKahel

LordKahel

Well-Known Member
You don't need the reload Gen 2 , you just need a magnet to twist the top off. It not like the dynavap where you need to pull on the cap to remove it, you just unscrew it. The magnet on top of the Vestratto Case does the job perfectly.
 
LordKahel,
D

delta hotel

Well-Known Member
Jojofernz said:
Love the reload for anvil. Have a gen 2 for my tempest and a gen 1 for the anvil. The reload is just great for almost every vape but especially these torch powered hot ones, magnet is great for debowling and repacking.
Click to expand...
I have a Gen1 for my Anvil and was thinking of picking up a Tempest soon, but didn't think to get a Gen2 with it and figured I'd just use the same across both or is there a significant difference in the Gen2?
 
delta hotel,
Vapetothegrave

Vapetothegrave

🌬️💨
Company Rep
I like the simrell pedestal at home as it is perfect for the anvil, strong magnet and cools very quickly. bonus points for low cost and ships/made in/from NA.

On the go it's not as convenient but it still does the trick and is small enough to fit in my vape case.
 
Vapetothegrave,
  • Like
Reactions: Ariwe
Jojofernz

Jojofernz

Well-Known Member
delta hotel said:
I have a Gen1 for my Anvil and was thinking of picking up a Tempest soon, but didn't think to get a Gen2 with it and figured I'd just use the same across both or is there a significant difference in the Gen2?
Click to expand...
Gen 2 is a bit bigger, no o-rings I think? The top magnet is more secure/doesn’t have the poker going into a screw on piece. Also the poker in the gen 2 is shaped like a small flathead to be able to screw apart the Tempest head if adjustments are needed.

I kinda like the gen 1 for the smaller size but also do prefer the design of the gen 2. Also like having two so I can keep anvil with one and tempest with the other. I tend to just leave them on the reloads even when done using them. Magnets so strong you can grab by the device and reload will come along haha. Or Vice-Versa
 
You must log in or register to reply here.
Top Bottom