• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Aezhenn Wood

Aezhenn

Well-Known Member
Accessory Maker
Hey! I would like to show you my first dugout /mini stand...

20220126_115207[1].jpg



13cm x 4.5 x 2.5
Made of old oak, with dyed ash side parts and boxwood and turquoise inlays

20220126_115225[1].jpg



20220126_115243[1].jpg



There's a small magnet on each side to assure a good close. The stem hole is made for a M-type vapcap.
You will find a curly boxwood and malachite stem with this dugout.

20220126_115338[1].jpg



The stash hole in the other side is 3cm depth by a diameter of 1.8 cm

20220126_115350[1].jpg


and always a strong magnet to hold your stem :)

Do you like this kind of accessory?
 

GoldenBud

Well-Known Member
Aezhenn I really adore the Tubo stem, but wish there would be an edition that supports 19mm basket screens. If you make one of these, ill get it ;)
all glass pathway is second to none!
 

FlyingLow

Team NO SLEEP!
I just LOVE my burl P80 stem, and need to order another.

Could you please repost some pictures of your lotus works? I cant believe I have not seen those before... I have a very special Lotus.
 

Aezhenn

Well-Known Member
Accessory Maker
I posted some pics long time ago and made a few lotus pipe who used the wpa lotus tool. But they got lost on fc. I will look for pics and will post them very soon @FlyingLow
 

Aezhenn

Well-Known Member
Accessory Maker
@FlyingLow
This one is the first Lotus pipe I made... (successfuly :lol:)
All in cocobolo, but not glass lined, in 3 parts.

DSCF8752.jpg


I made a more simple model, with two parts, the same as the vapcap pipe I do. Here in walnut.

20190816-191139.jpg


It can be glass lined, but if you want to remove the glass for cleaning, the stem will be shorter than the one you can see here. A too long glass tube can be hard to remove without breaking it . But we can imagine a glass tube who doesnt move too. (just with another way of cleaning than soaking directly in iso)

:)
 

Aezhenn

Well-Known Member
Accessory Maker
you wouldn't happen to make these for Lamart, do you? I'd love another but with a custom color instead.
I used to do some long wood stems for Lamart, but in a capsule mode style.
You want me to do a kind of wood sleeve for those all glass stems?
 
Aezhenn,

TeaCup

Well-Known Member
I used to do some long wood stems for Lamart, but in a capsule mode style.
You want me to do a kind of wood sleeve for those all glass stems?

Yeah I wasn't sure just how much you did for Lamart. I don't know where I got it in my head that you also did glass work. Thanks though, maybe I'll reach out to Lamart and see if he'll say who makes them.
 
TeaCup,
  • Like
Reactions: Aezhenn

Aezhenn

Well-Known Member
Accessory Maker
@TeaCup No, I am sorry but I dont do glass work... All my glass tubes come from Glass Charlie, who is doing a great work .
Best thing to do is to send a message to Lamart to know more about these glass stems :)
 

Aezhenn

Well-Known Member
Accessory Maker
Hello good people!
I made some new stems for one of my favorite vape of my rotation, the fury Edge from Healthyrips.
I like to use the glass stem but it's always better with a bit of wood, isnt it? :D
I asked to Glass Charlie for longer tubes than the original one and let me show you the new pieces, hot from the shop...
(Compatible with the Rogue too)

20220130_113820[1].jpg


Hondurian rosewood burl

20220130_105848[1].jpg



Curly ash

20220130_113910[1].jpg



Red amboyna burl

20220130_110005[1].jpg



Curly maple

And a family pic of all the stems in stock ;)

20220130_105526[1].jpg



20220130_105536[1].jpg



I wish you all a great day!
:):peace:
 

Aezhenn

Well-Known Member
Accessory Maker
Hello good people!

I have the pleasure to collaborate with Glass Charlie (aka @davesmith ) for all my glass tubes. Here's a shorty vap cap stem with a spiked glass tube of his own, round edges for the lips, and direct tip fit... I like it a lot and would like to know your opinion about it...

I made for it a thuya burl sleeve, handcarved with a knife for the spiral patterns, and then I did a bronze inlay with some mother of the pearl touch...

20220228_104142[1].jpg



20220228_104339[1].jpg



Spiked tube for better cooling...

20220228_104014[1].jpg



The vc tip fits directly in for a 100% glass airpath.

20220228_103946[1].jpg



I hope you will like it, just tell me your thoughts!

I wish you all a great day!

:peace:
 

Aezhenn

Well-Known Member
Accessory Maker
Hello good people!

I hope you are all fine!
I have some new pieces to show you today! It was a long time I didnt made a stand with resin inclusion... So it was a real pleasure to find the way back for a couple of cuties... :brow:

20220321_155727[1].jpg



20220323_090057[1].jpg



20220323_090303[1].jpg



This first one was a custom order, in red amboyna burl, with two abv bowl in msasa. I like how the resin and pigments pop on the wood!

20220328_095359[1].jpg



The second one is made from a madre cacao piece, with spalted beech, resin, gold leaves and mother of the pearl inlays...
The huge abv bowl (diameter 9cm) is turned in red narra roots , with a lovely grain, and spalted beech.

20220327_110359[1].jpg




20220328_094513[1].jpg



20220328_111351[1].jpg



It reminds me a painter's palette...

8 vapcap holes and a strong magnet, enough place to install a nice collection...
This stand is looking for a new home ;)

And I will finish this post with a nice spring stem...
20220323_163017[1].jpg



Ash, mouthpiece in bloodwood satine, inlays in red narra and turquoise...

I wish you a great sunny day!
 

Aezhenn

Well-Known Member
Accessory Maker
Hello good people!

A new stand has landed!
When I look at it, each side is a travel ... I easily imagine landscapes, planetes from outer space, or colorful fairies... Well , maybe I am going too far but let's have a look at it anyway :lol::cool:


20220406_084346[1].jpg



A madre cacao stand, with colorful resin inlays...

20220404_164131[1].jpg



Removable abv bowl in olivewood , the flying saucer!

20220406_083529[1].jpg



20220406_083503[1].jpg



20220406_083515[1].jpg



5 vapcaps holes and a strong magnet


During all April, there will be 15% off on this stand and the big one seen in the last post.

15% off on those stems too! :tup:

20220406_161623[2].jpg



Just dm if you are interested ;)

I wish you all a great day! :peace:
 

Aezhenn

Well-Known Member
Accessory Maker
Hello good people,

just a few days before the end of April and the end of the Spring sales...
As there's still two stands and two stems in stock, I would like to add a special discount ... :brow:

If you buy a stand (with 15% off) you will have 50% off on a stem! :party::party::party:

Here's the pieces available:

20220425_142227[1].jpg



Don't hesitate to ask for more pics if interested ...

All the best!

:) :peace:
 

Aezhenn

Well-Known Member
Accessory Maker
Hey hey good people!
everyone is fine in the house?

Here's some a batch of vapcap stems, hot from the shop!
I hope you will like them ;)

20220914_182603[1].jpg


From left to right, let me introduce you:

- curly maple/padouk with his bronze inlays and blackwood mouthpiece

- blackwood and dyed poplar burl

-curly maple/ dyed poplar burl and a padouk mouth piece

-walnut and orange acrylic (with some grey wood parts ) and bronze inlays

All of them with their 8mm od glass tube for a better flavor;)

Some more shots for the eyes' pleasure...

20220917_111359[1].jpg



20220917_111457[1].jpg



20220917_111430[1].jpg



All of them are looking for a new home... ;)

I wish you all a great day!
 
Top Bottom