cptofnthng
Well-Known Member
Curiously, it seems it takes forever to register a device in ones account. i made a request for me E04 replacement weeks ago.
-
SCAM WARNING! See how this scam works in Classifieds.
Venty by Storz & Bickel
- Thread starter Jill NYC
- Start date
UPdownLoAD
Member
I got a Venty in February and registered the day I got it. I got an email exactly I month after registering that said: "Your registered device has been approved!
We are glad to inform that your registered device was approved. You can now benefit from a 3 year warranty for your registered device."
So it may take a month unfortunately before your warranty is registered.
justcametomind
Well-Known Member
If you read the last 3 pages of the thread you should be able to read a post stating that SB changed how the LCD screen of the unit is linked to it.
They discovered that e04 was linked to the old way the screen was connected to the body and that heavy drops would trigger errors.
So the newer version should be less prone to e04, in any case don't drop it.
I'm on my 4th unit and I think drops were probably the trigger for my last RMA, the first one doesn't count as it was mandatory from SB, the second.. I probably dropped it hard at least once.
Last edited:
Flying High
New Member
I live in Kangaroo land where legislation was changed shortly after the venty was released.
This has put me in a situation were warranty is non existant from what I heard you might get a mighty medic if you get a e04 with no refund in dollar difference.
Luckily I have two original ventys that have never e04 only issue is i can't get either of them to update to latest firmware so have to keep double pressing to boost temperature.
I treat them like glass, think that's why they haven't had any errors. ... hopefully I haven't jinxed myself.
Probably around 250-300 hours on each venty.
It's always a hard decision to reach for the venty or volcano
2 favourite vapes.
This has put me in a situation were warranty is non existant from what I heard you might get a mighty medic if you get a e04 with no refund in dollar difference.
Luckily I have two original ventys that have never e04 only issue is i can't get either of them to update to latest firmware so have to keep double pressing to boost temperature.
I treat them like glass, think that's why they haven't had any errors. ... hopefully I haven't jinxed myself.
Probably around 250-300 hours on each venty.
It's always a hard decision to reach for the venty or volcano
2 favourite vapes.Damn, that sucks. You probably couldn't even get a Venty from Germany through customs if S&B were willing to do that. But yeah, treating your "old" Venties (yikes!) like glass and avoiding drops seems like your best bet to give them a long life without E04.
Finessseee
Well-Known Member
Thinking about picking up the Venty soon — are there any must-have accessories you’d recommend? I’m considering an extra cooling unit, finer mesh screens, and maybe the POTV glass adapter for water use. Do you think the Supercharger is necessary, or will a good USB-C laptop charger do the job? Curious what’s actually useful vs what ends up sitting around.
Vitolo
Vaporist
It is a very good purchase... and a very fast charge for S&B portables.
SolidAirrr
Well-Known Member
yes
Definitely nice, especially if you're mostly using it natively... If you're a water/dry use guy, you'd probably need it less... I don't feel it's really a necessary thing with the venty, but that's rather personal preference really... You're big in glass, get that...
Same with screens, the are some extras included, but yeah, over time replacement come in handy...
Enjoy
An extra cooling unit makes sense. It sucks when you need to clean the CU but really want to vape a bowl. I just switch CUs and clean the old one at my convenience.
There are a few screens in the box but you will need more eventually, so might just order some right away.
I've never felt a need for a water piece with Venty. When I do want to rip a bong, I grab the TM2. But yeah, if you like to play with a6 water piece from time to time, get a WPA, by all means.
Any USB-C PD power supply will work. As long as it supplies at least 20-25W, you're good. Laptop charger definitely has enough power.
Finessseee
Well-Known Member
For those of you who already own a Venty, what do you pair it with when you’re chasing something heavier? Like that stony, couch-lock feel at higher temps. Just trying to figure out what complements it best when you’re in the mood to really feel it.
UPdownLoAD
Member
Venty is my pregame to my ball vape
Finessseee
Well-Known Member
Can you link these screens? I’d like to add more conduction to the Venty lolI switched out the stock screen for these concave metal screens
I remember seeing some one do it on a mighty like a decade ago
I think i adds more conduction with the high air flow
also they dont get any off that clogging of the screen from fine grind
Venty Bead Stem
Like our popular Rocket Stems, the VENTY Bead Stem attaches to your device with a silicone connector. The VENTY Bead Stem is a highly efficient, compact stem that will definitely outperform the standard cooling unit that your device was shipped with.
Can anyone else verify that a Venty stem can fit in a TinyMight? Tight fit? Loose? Thanks!
BennyTheBall
Member
Its actually the other way round. The silicone connector that you twist onto the venty will take any tinymight stem snugly.Venty Bead Stem
Like our popular Rocket Stems, the VENTY Bead Stem attaches to your device with a silicone connector. The VENTY Bead Stem is a highly efficient, compact stem that will definitely outperform the standard cooling unit that your device was shipped with.www.sneakypetestore.com
Can anyone else verify that a Venty stem can fit in a TinyMight? Tight fit? Loose? Thanks!
I mainly use this one in mine when at home.
extra long 3D cooling stem for Tinymight 1 & 2
This XL stem provides a solution to use Tinymight when portability is not the main concern. The benefit of the extra long stem is that it has special features inside the glass to cool down vapor without using the cooling unit. And cleaning is very simple, you can just rinse it with a hot water...
Sorry, confused. I think you're saying that any TM stem will fit into the Venty because of the silicone connector? That seems like it would make more sense, but won't help me, lol. I wanted that stem for my TM. Thanks though, keep up the good work, always nice to see what cross fits.Its actually the other way round. The silicone connector that you twist onto the venty will take any tinymight stem snugly.
I mainly use this one in mine when at home.
extra long 3D cooling stem for Tinymight 1 & 2
This XL stem provides a solution to use Tinymight when portability is not the main concern. The benefit of the extra long stem is that it has special features inside the glass to cool down vapor without using the cooling unit. And cleaning is very simple, you can just rinse it with a hot water...vapefiend.co.uk