-
SCAM WARNING! See how this scam works in Classifieds.
The "Stunner"
- Thread starter tinctorus
- Start date
TigoleBitties
Big and Bouncy
Very nice hit. Good lung capacity!
Maybe time to consider freediving as a second hobby?
. 2pumpchump
Well-Known Member
After @bellona0544 great review I decided to pull 1 of my updated caps apart to find it seams to have more balls .the new rev b bowl really shines using the new HFC on a WP I'm really liking the new disk ball retailers and the new HFC really holds the heat better ..
Side note I love how the cap color for everyone's heating style is like a signature
kinda maks your vape part of youbellona0544
Well-Known Member
Small update: I tried the Stunner with my Wand for the first time in a while and just let it run til it timed out with the lip of the Wand resting on the head of the Stunner, and dang, I forgot how versatile the Wand is.
2pumpchump
Well-Known Member
I hear people have good results might have to try
TigoleBitties
Big and Bouncy
I have the original Stunner head and have only ever used the Wand. Even though apparently it wasn't designed to be IH friendly, there appears to be enough ferrous material in there for good heating with the Wand.
Interestingly, I find that the time/temp Wand settings people are sharing about the Tempest hold true for my Stunner. Lately I set it to 600F for flower and heat until timeout but YMMV.
The killer feature about using the Wand for me is the ability to heat while inhaling. Not something you can really do with a torch I think? I take low temp delicious sips about 25s into the first heat cycle. Who needs an indicator when you can sip while heating?
After the Wand times out, if you don't clear the bowl in one cycle, you can just bring the Stunner back up to temp in around 10s by using the Wand like re-lighting the tip of a cigar. All while puffing away testing for vapor to return.
TedJones
Well-Known Member
That’s pretty cool. I didn’t think the cap was for IH.
I’ve torched for about 12 seconds for a quick terpy pull with minimal vapor, then heat again for another 8-10 to finish with more pulls/vapor. Works pretty good
I wouldn’t try lol. Might be able to with a long stem and vertical torch. Might need a spinning mouthpiece too!
I’ve torched for about 12 seconds for a quick terpy pull with minimal vapor, then heat again for another 8-10 to finish with more pulls/vapor. Works pretty good
TigoleBitties
Big and Bouncy
It wasn't meant to be but one of the early adopters who had a Stunner and a Wand gave it a try and it worked great. After I read this, I pulled the trigger on the Stunner immediately. TA wasn't available anymore and the Tempest was still early in development. It was my first ball vape experience and it's still great.
Nice. I sometimes wish I had more freedom to use torches around the house so I could use my glass vapes like the Terpedo from TRWW more often. Wife is not a fanI wouldn’t try lol. Might be able to with a long stem and vertical torch. Might need a spinning mouthpiece too!
I’ve torched for about 12 seconds for a quick terpy pull with minimal vapor, then heat again for another 8-10 to finish with more pulls/vapor. Works pretty good
. First world problems I guess 
2pumpchump
Well-Known Member
I remember reading this I really have been considering IH for conveince and to eliminate the sights of torches at timesIt wasn't meant to be but one of the early adopters who had a Stunner and a Wand gave it a try and it worked great. After I read this, I pulled the trigger on the Stunner immediately. TA wasn't available anymore and the Tempest was still early in development. It was my first ball vape experience and it's still great.
Nice. I sometimes wish I had more freedom to use torches around the house so I could use my glass vapes like the Terpedo from TRWW more often. Wife is not a fan
Alot of people like it, I much prefer the torch myself
2pumpchump
Well-Known Member
This thing rips
oddjobold
Vape swap shop
I am not allowed to own desktops in my situation. I have never tried a desktop ball vape.
The Stunner is the strongest portables I have ever tried. I copied some of the videos, got a big old torch with a nice big flame and heated up that bad boy. I was taken back by how much vapor it produces. The bowl was like 80% done in one. The 2nd heating did not produce much.
My Stunner is sitting on one of the new Dani metal stems, the fit is pretty lose. I wrapped a bit of hemp fibre round the tip to tighten it up.
I find the cap sometimes difficult to thread on to the bowl. Seems like both caps are much the same.
I think I am going to have fun with this vape.
The Stunner is the strongest portables I have ever tried. I copied some of the videos, got a big old torch with a nice big flame and heated up that bad boy. I was taken back by how much vapor it produces. The bowl was like 80% done in one. The 2nd heating did not produce much.
My Stunner is sitting on one of the new Dani metal stems, the fit is pretty lose. I wrapped a bit of hemp fibre round the tip to tighten it up.
I find the cap sometimes difficult to thread on to the bowl. Seems like both caps are much the same.
I think I am going to have fun with this vape.
TigoleBitties
Big and Bouncy
Enjoy it! The Stunner was my first ball vape as well and it still works great. It will be interesting to see the differences between it and the upcoming Tempest that seems to have a lot more airflow options.
oddjobold
Vape swap shop
I have a tempest and I don't think it's fair to make a comparison because I have never used it with the direct tube. However with the helix tube it's night and day. The Stunner is stronger and feels more powerful. However the tempest is way way cooler and more refined.
I have decided not to judge which I prefer, (including the fusion 2.0 in this) until I get a IH. I am holding out for the flare.
TedJones
Well-Known Member
Well said! Pretty much my sentiments too (although I don’t have the 2.0
). Stunner has an advantage with more balls and a bigger bore with the 9mm.2pumpchump
Well-Known Member
Challenge excepted
TedJones
Well-Known Member
Ah, nice one! Yea, your face is safe with the bubbler & whip there. Was thinking of it mounted in a stem and trying that technique .. might burn the eyebrows
Challenge excepted
2pumpchump
Well-Known Member
Thanks for noticing YES I MIGHT DO THINGS NOT RECOMMENDED EVEN BY MYSELF...!!!!Ah, nice one! Yea, your face is safe with the bubbler & whip there. Was thinking of it mounted in a stem and trying that technique .. might burn the eyebrows
I do things to fuck around and find out ...
I do this at my own safety risk and risk of my vape equipment. And do not hold any vape company or retailer responsible for my misuses of products.. also to keep safety in mind..
That being said . With clean butane and the new mettle disk on the HFC it doesn't hurt to suck a bit of the flame while heating .. IF YOU CAN DO IT SAFELY!!!
TedJones
Well-Known Member
Yea. Actually reminds me of how the sticky bricks are used. You notice any difference from the normal heat, then pull method?
2pumpchump
Well-Known Member
It dose seems to heat a tad faster. Also finding it a nice way to add some extra heat for lower temp multi hits .. I'm playing around with it I'll keep you posted
2pumpchump
Well-Known Member
Wanted to post on here about the Instagram giveaway im doing
Vapor solutions on Instagram: "GIVEAWAY TIME! Ok guys I'm going to be doing my first giveaway here and the rules are super simple to enter To enter 1} Like this post 2} follow this account and my backup account @vaporsolutions2 3} Tag 3 friends Un
158 likes, 177 comments - vapor.solutions on February 1, 2024: "GIVEAWAY TIME! Ok guys I'm going to be doing my first giveaway here and the rules are super simple to enter To enter 1} Like this post 2} follow this account and my backup account @vaporsolutions2 3} Tag 3 friends Unlimited...
www.instagram.com
2pumpchump
Well-Known Member
TedJones
Well-Known Member
@2pumpchump nice one ! Are you using the high flow cap or sniping that concentrate on the low flow? Also, does your water get dirty quickly without a stem insert/cooler or a rig drop down/catcher?