Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
TAG super slit donut, milked by something new (this is just a beta testing secret tease, full product reveal is coming very soon!l
Yeah I had posted mine to tease BAK^
TAG super slit donut, milked by something new (this is just a beta testing secret tease, full product reveal is coming very soon!l
Maybe like don't talk about ALL the bubblers so much bruh, the walls have ears I didn't mention that Coyle Condenser until i found out that it was totally outta my price range .... there is only one left for salewhen I got mine I kept talking about it so much that people bought out the stock and it was a long wait for it to come back lol
I think the Vertex preorder is over now anyway. So you can wait for reviews and for the TAG 4/20 discount before you make up your mind.I can't decide between the CC Vertex and TAG Donut
I can't decide between the CC Vertex and TAG Donut...
I'm typically a buy one piece every 5 years type of guy... I have a D020-d, and a SOL piece.
I find the D020-d too small and the SOL too big. I think I have lower than average lung capacity.
I mostly use a CH B1 vape.
I know people haven't used the Vertex yet, but can anyone help me decide between these two?
I recommend a recycler bubbler for your B1- they come in various sizes and are a nice upgrade from the D020- which I realised today was what got me into bubblers through recommendations in this very thread 9 years ago!!!!I can't decide between the CC Vertex and TAG Donut...
I'm typically a buy one piece every 5 years type of guy... I have a D020-d, and a SOL piece.
I find the D020-d too small and the SOL too big. I think I have lower than average lung capacity.
I mostly use a CH B1 vape.
I know people haven't used the Vertex yet, but can anyone help me decide between these two?
Will it ever go lower than $149 for a 2nd!?*CLEARANCE* - TAG - 9" Modular Showerhead Donut 75x5MM (For Vaporizers
Experience versatility with TAG's 9" Modular Showerhead Donut, designed for vaporizers. Complete with accessories, fits 18MM Female joints. Shop today!www.thickassglass.com
This^ is what you both want, it has a much better perc and style, with a different mouthpiece (45° angle adapter helps) you can also turn it into a sidecar, it has amazing views for watching the milk fill... Worth waiting for the 420 sale perhaps, they always have big discounts, but the price has gone up on this piece since I got mine (did not used to come with a mouthpiece either only whip with adapter and mouthpiece)
I would not want either of the pieces you posted honestly, nor the two above (which I actually had from vapexhale and sold along with my FC-Mod too) bad perc/styles imo
Currently it's $111.75 with the discount code 25-February on the site the right now. Probably a deeper discount for April though.Will it ever go lower than $149 for a 2nd!?
Looks very nice with the couchlog although it seems it has a large space to be filled with vapor? Is this middle space with the donut too big?
That modular TAG piece
Nice with herb, pleasing hits. Will have to try with higher water level.
I was thinking to order it too, couple of weeks ago, but skipped it comparing it to the original. The m/p seems different for sure, more like bad copy. I have bought Grav upline upright bubbler copy from dhgate and I like it very much though.The Upline clone arrived yesterday. For $50 it is good, but I am not sure it is a perfect replica as a few comments on the DHGate store say ( the downstem is not 100% perfectly vertical, etc).
I couln't resist pimping it up with some extra bits to make it look even more like an Elven crystal hookah! It actually performs well with the ash catcher/not drop down thing!
Here's a nice shot with the Thunderbolt next to it. (The bowl needs a deep scrub so it got left out of the shot)
This does what I expected, compared to my recyclers: Smaller hits, bigger flavour. It is a real terp delivery vehicle and will probably pair really nicely with a Dynavap with heat jacket, or Anvil, etc. With my Quartz Thunderbolt injector it cannot deliver the big dab-like rips I can get with a recycler, but allows for a slower savouring of the flavour, and the lighter draw keeps the heater hot for a longer time.
You have to get the water level just right, and you need to draw slowly at first so as to stack the bubbles in order and build up the percolation through each successive chamber and get a nice steady boiling action going on in the upper chamber rather than a haphazard splashing. It seems to work better when held at a slight angle rather than perfectly horizontal on a tabletop.
The experience is similar to the Rattle Can bubbler that has been mentioned here a few times.
Here's a few sneaky quick milk pulls from the QT and slightly too much water in the piece.
The mouthpiece is a bit narrower than I would have liked- it is clear that the narrower the mouthpiece the better the vapor tastes, but the more coughing it causes! If i had a glass blower nearby I would be tempted to ask them to cut off about 1/3 of that nipple so as to enlarge the hole slightly.
I would have liked thicker glass for this piece. The entire design is CRYING OUT for a detachable mouthpiece... It would be a simple matter to replace the mouthpiece tube with a 14mm elbow joint....
On the whole it' s a fun piece and qualifies as cheap and relatively quality bubbler but now I want to try the original! This is the 5th and probably final Chinese clone bubbler I have bought...
Yeah I still need to add water but my distilled water is in this huge jug lol so I haven't taken the effort yetLooks very nice with the couchlog although it seems it has a large space to be filled with vapor? Is this middle space with the donut too big?
I don't know for sure what you mean but it doesn't have real flaws. It needs more water though, and a better mp although the one it came with slightly better than I feared. I also need to try it with my herborizer.Is this middle space with the donut too big?
Yeah that's what I did. Saved me a lot of money.If I order from US I may order two together to reduce shipping and handling expenses.
Never hurts to askHow the package arrives in customs? There is a full description with accurate price or are they flexible to declare a smaller price?
Finally how the modular TAG compares with the modular bubbler you got from dhgate couple months ago? Has a very nice mouthpiece
Like he said above, adding more water will reduce that volume.@Abele Rizieri Ferrari I meant the space inside red borders isn't too big and therefore requires heavy drawing to fill up with vapor properly?
@Abele Rizieri Ferrari I meant the space inside red borders isn't too big and therefore requires heavy drawing to fill up with vapor properly?
That seems like an expensive DHGate piece especially when you need to add a decent MP and downstem, I still have it in my favs list though!The downstem on that ylhookah one is not great so I need to upgrade that at some point. The mp also quickly become a bit annoying actually. So hard to compare fairly at this point.
That seems like an expensive DHGate piece especially when you need to add a decent MP and downstem, I still have it in my favs list though!
Fucking seconded. They likely exist but are not in this forum because still combusting! The one guy I know personally moved to making marbles and artwork... I am trying to convince him to make some paraphernalia, lolWould love a OGB style craftsperson here.
Yeah the downstem is the biggest issue as mp's are easier to get a nice one here in EU (although not from EU afaik).
Agreed. His work looks fantastic.Would love a OGB style craftsperson here.
From Michigan it says in their profile, so another US favoring option@VaPeD&CoNfUsEd will do custom work, WPA, drop-downs to suit Dewer joints etc.
I thought you meant the forum, not your countryWould love a OGB style craftsperson here
Cool I'll check it out!I thought you meant the forum, not your country
@VaPeD&CoNfUsEd will post to Oz at a reasonable price so may to you as well but you have nasty import duties etc from memory.