T-Bucket Banger System by NewVape

SquirrelMaster

Well-Known Member
Quick question since the T bucket is now back in stock.. I know the handle isn't necessary other than just being a safety feature with this but I've seen many do use a handle with their T bucket. I still have my old handle from my broken coil that I mentioned in the Flowerpot thread so I didn't get one with my order today. Holding the handle in my hand, it doesn't weigh much and since it's much safer with it I think I'll give it a try with and without when my T bucket arrives. I just wanted to ask you guys.. How many of you use a handle with your T bucket or D Cup? Yea or nay?

I feel as if I was forced to get the sic dish since the Sapphire still isn't in stock. I asked CH today about what the timeline was with them and am still waiting to hear back. If anyone's heard anything let us know! I'd rather wait for the CH branded dish rather than the D Nail one due to the size being more fitting.
I have a handle on my B2 but not yet on my B1 (handle incoming). I know that's a different device but my preference would hold true either way, and I prefer a handle. It's just a little easier to grab imo.

I didn't realize there is even an option for a non-CH T-bucket sapphire dish. I'm still holding out for them to bring it back before I make an order, if the fitment is better.
 

Socks And Sandals

Well-Known Member
I have a handle on my B2 but not yet on my B1 (handle incoming). I know that's a different device but my preference would hold true either way, and I prefer a handle. It's just a little easier to grab imo.

I didn't realize there is even an option for a non-CH T-bucket sapphire dish. I'm still holding out for them to bring it back before I make an order, if the fitment is better.
Thanks for the feedback!

Yeah I'm kinda swaying that way myself. Not only can we grab it better but overall I just think it's safer too. I still have my old plain handle to test the waters. I can always come back later and get the new CH handle I really want if I like the way this one looks and feels with it.

Yeah man, as far as that other option for a Sapphire Dish goes.. the guy who posted right before me on the previous page posted a link to it. Bad news is that it's $500!:whoa: D - Nail has it but I'm just going to wait for CH to restock it.
 

focalforlife

Well-Known Member
Quick question since the T bucket is now back in stock.. I know the handle isn't necessary other than just being a safety feature with this but I've seen many do use a handle with their T bucket. I still have my old handle from my broken coil that I mentioned in the Flowerpot thread so I didn't get one with my order today. Holding the handle in my hand, it doesn't weigh much and since it's much safer with it I think I'll give it a try with and without when my T bucket arrives. I just wanted to ask you guys.. How many of you use a handle with your T bucket or D Cup? Yea or nay?

I feel as if I was forced to get the sic dish since the Sapphire still isn't in stock. I asked CH today about what the timeline was with them and am still waiting to hear back. If anyone's heard anything let us know! I'd rather wait for the CH branded dish rather than the D Nail one due to the size being more fitting.
I'm using a Dfreez handle on my tbucket
IMG-7341.jpg
.
 

Dejavu

Active Member
Quick question since the T bucket is now back in stock.. I know the handle isn't necessary other than just being a safety feature with this but I've seen many do use a handle with their T bucket. I still have my old handle from my broken coil that I mentioned in the Flowerpot thread so I didn't get one with my order today. Holding the handle in my hand, it doesn't weigh much and since it's much safer with it I think I'll give it a try with and without when my T bucket arrives. I just wanted to ask you guys.. How many of you use a handle with your T bucket or D Cup? Yea or nay?

I feel as if I was forced to get the sic dish since the Sapphire still isn't in stock. I asked CH today about what the timeline was with them and am still waiting to hear back. If anyone's heard anything let us know! I'd rather wait for the CH branded dish rather than the D Nail one due to the size being more fitting.

etsy sells some cheap 3d printed handles that look good and are cheap. It is a big quality of life improvement for my fp. I assume the tbucket will have balance issues when handling it? A good handle would be worth it($12 and pick your color)from etsy unless you want an aliexpress cheap looking wooden handle.
 

focalforlife

Well-Known Member
Nice handle!
I prefer handle to non-handle-coil anyday.
How did you fit this handle? I see no slit.

I only encountered 2 types up to now: the 2 piece type like the CH handle or the 1 piece with a slit on the side to slide the cable in.
It has a slit on the bottom to slide the cable in. A little black tape to tighten it up a little. DFreez makes great handles and bowls. I have a matching carb cap handle.
IMG-7342.jpg
 

Socks And Sandals

Well-Known Member
I'm using a Dfreez handle on my tbucket
IMG-7341.jpg
.
They even have a website! I just book marked them and plan on checking it out tonight when I'm medicated off my first T bucket Live Shatter hit! I knew about etsy but this is the first time seeing these Dfreez accessories! Thanks for bringing this to my attention! Sweet looking set up my man! Where did you get the blue lighting?
etsy sells some cheap 3d printed handles that look good and are cheap. It is a big quality of life improvement for my fp. I assume the tbucket will have balance issues when handling it? A good handle would be worth it($12 and pick your color)from etsy unless you want an aliexpress cheap looking wooden handle.
Yeah I was checking some of those out last night along with Vgoodies and their Ed's Tnt offered in their bundles! My t bucket came today so I'll be playing around with both using the handle and without it. If there are any weight issues I'll definitely report my findings. Etsy has been blowing up lately in a whole lot of my online circles. Thanks for the info!
 

focalforlife

Well-Known Member
They even have a website! I just book marked them and plan on checking it out tonight when I'm medicated off my first T bucket Live Shatter hit! I knew about etsy but this is the first time seeing these Dfreez accessories! Thanks for bringing this to my attention! Sweet looking set up my man! Where did you get the blue lighting?

Yeah I was checking some of those out last night along with Vgoodies and their Ed's Tnt offered in their bundles! My t bucket came today so I'll be playing around with both using the handle and without it. If there are any weight issues I'll definitely report my findings. Etsy has been blowing up lately in a whole lot of my online circles. Thanks for the info!
You won't go wrong with Dfreez. The blue lighting is a corsair mm700 gaming mat https://www.amazon.com/Corsair-MM70...ords=corsair+gaming+mat&qid=1677443794&sr=8-3 . In the first pic i have a slabpad from mininail https://www.themininail.com/collections/mininail-accessories-and-add-ons/products/backlit-slab-pad .
 

Socks And Sandals

Well-Known Member
You won't go wrong with Dfreez. The blue lighting is a corsair mm700 gaming mat https://www.amazon.com/Corsair-MM70...ords=corsair+gaming+mat&qid=1677443794&sr=8-3 . In the first pic i have a slabpad from mininail https://www.themininail.com/collections/mininail-accessories-and-add-ons/products/backlit-slab-pad .
Thanks for that. The lighting looks sick! I was checking out their usb silicone mat when I was trying to decide between the mini nail or the T bucket. I'm sure the Mini nail is awesome (I nearly bought it instead) but I think I made the better choice. Dunno if I'll use the B2 for trates again unless it's a double decker honestly. I haven't had this much of a heady high since I torched up a banger myself. Lets just say I'm extremely happy with my T Bucket decision!
 

okabe1221

Member
Thanks for that. The lighting looks sick! I was checking out their usb silicone mat when I was trying to decide between the mini nail or the T bucket. I'm sure the Mini nail is awesome (I nearly bought it instead) but I think I made the better choice. Dunno if I'll use the B2 for trates again unless it's a double decker honestly. I haven't had this much of a heady high since I torched up a banger myself. Lets just say I'm extremely happy with my T Bucket decision!
I got antsy waiting for resupply and got Mini nail in a haste. Looking at getting bucket to try still
 

focalforlife

Well-Known Member
Thanks for that. The lighting looks sick! I was checking out their usb silicone mat when I was trying to decide between the mini nail or the T bucket. I'm sure the Mini nail is awesome (I nearly bought it instead) but I think I made the better choice. Dunno if I'll use the B2 for trates again unless it's a double decker honestly. I haven't had this much of a heady high since I torched up a banger myself. Lets just say I'm extremely happy with my T Bucket decision!
Well congrats on that but its not a surprise to me as I owned both. The bigger unobstructed dish gives better hits in my opinion and is just easier to use and clean. Having said that the mininail played a role in my life, lol. I've got 3 of the slabpads as I got the on 4/20 sale. I definitely would recommend them. This is one of the other matts/stations:
IMG-E7174.jpg
 

Circa1999

Well-Known Member
Hello, could you guys please help me out.

I currently have a flower pot with a shower head attachment only.

I'm looking to upgrade to the T-Bucket system, could you please help me figure out what I need to buy?

  • T-Bucket Banger Assembly (7025)
  • Universal Carb Cap with Cocobolo Handle (7027-CB)
  • 14mm Male Connection (3237)
  • 18.8mm Male Connection (3234)
  • 30mm NV SiC Dish (3232)
  • CH Single PID Controller (9089) or Auber RDK Controller (9319)
  • Flat Coil - USA 110v (9371), INT 220v (9370)
  • US Power Cord (9250)
This is all the stuff that they list that comes with the bundle.

So I think I need to buy everything except for the US Power Cord and the Controller???


Also do you guys think I should buy new glass (Osprey Bubbler)? I'm using that standard glass piece bubbler that came with the flower pot 2 years prior.

I don't know anything about dabbing/concentrates, are there any other tools I should buy? What about the Ceramic Tipper Dab Tool (9402)
 
Last edited:

seki

Well-Known Member
Hello, could you guys please help me out.

I currently have a flower pot with a shower head attachment only.

I'm looking to upgrade to the T-Bucket system, could you please help me figure out what I need to buy?

  • T-Bucket Banger Assembly (7025)
  • Universal Carb Cap with Cocobolo Handle (7027-CB)
  • 14mm Male Connection (3237)
  • 18.8mm Male Connection (3234)
  • 30mm NV SiC Dish (3232)
  • CH Single PID Controller (9089) or Auber RDK Controller (9319)
  • Flat Coil - USA 110v (9371), INT 220v (9370)
  • US Power Cord (9250)
This is all the stuff that they list that comes with the bundle.

So I think I need to buy everything except for the US Power Cord and the Controller???
Given that you've got a Showerhead, there's a possibility that your PID is one of the older style with the legacy connections. CH does have the older coils still available for sale on their site:


For reference, the one on your list is the newer one here:


I'd recommend double checking yours and verifying the connection type before placing an order.

I think the power cord is included with the PID so while you might be able to purchase one separately it's generally included with the device. I think it's mainly listed for clarity as some non-North American customers require different plug types.

Depending on the frequency of your usage, a 2nd PID might be something to consider as constantly switching coils can be a pain. It would also facilitate doing back to back hits with your Showerhead as you could heat up both at the same time if that's of any interest. Another thing to keep in mind is that you'll likely need another stand if you're going to use both simultaneously.

You also may not require both the 18mm and 14mm connectors (3234 & 3237) depending on the types of joints you have on your glass.

The carb cap is required, but there are also other cheaper options available both through CH and with other retailers if cost is a concern.



Also do you guys think I should buy new glass (Osprey Bubbler)? I'm using that standard glass piece bubbler that came with the flower pot 2 years prior.

I don't know anything about dabbing/concentrates, are there any other tools I should buy? What about the Ceramic Tipper Dab Tool (9402)
I've only been using concentrates regularly for the last year so I'm still figuring out my preferences and how best to consume, but I personally like to use a separate rig especially if I'm using flower and concentrates on the same day. I find the flavour is affected when I use the same piece for both. There are pluses and minuses to using different sized rigs, but I think a lot of it boils down to personal preference. I've used an 18mm and a 14mm piece and have had excellent results with both, but I mostly use a 14mm for concentrates and an 18mm piece for flower.

A dab tool of some sort will be required to get the material loaded into the Tbucket, but there are tonnes of different options in this regard, you can even make do with some household items that you probably already have.
 

Circa1999

Well-Known Member
Given that you've got a Showerhead, there's a possibility that your PID is one of the older style with the legacy connections. CH does have the older coils still available for sale on their site:


For reference, the one on your list is the newer one here:


I'd recommend double checking yours and verifying the connection type before placing an order.

I think the power cord is included with the PID so while you might be able to purchase one separately it's generally included with the device. I think it's mainly listed for clarity as some non-North American customers require different plug types.

Depending on the frequency of your usage, a 2nd PID might be something to consider as constantly switching coils can be a pain. It would also facilitate doing back to back hits with your Showerhead as you could heat up both at the same time if that's of any interest. Another thing to keep in mind is that you'll likely need another stand if you're going to use both simultaneously.

You also may not require both the 18mm and 14mm connectors (3234 & 3237) depending on the types of joints you have on your glass.

The carb cap is required, but there are also other cheaper options available both through CH and with other retailers if cost is a concern.




I've only been using concentrates regularly for the last year so I'm still figuring out my preferences and how best to consume, but I personally like to use a separate rig especially if I'm using flower and concentrates on the same day. I find the flavour is affected when I use the same piece for both. There are pluses and minuses to using different sized rigs, but I think a lot of it boils down to personal preference. I've used an 18mm and a 14mm piece and have had excellent results with both, but I mostly use a 14mm for concentrates and an 18mm piece for flower.

A dab tool of some sort will be required to get the material loaded into the Tbucket, but there are tonnes of different options in this regard, you can even make do with some household items that you probably already have.

Thanks for the help.

Just contacted support and they told me that I have a current XLR connection.

I think I'm just going to switch to concentrates full for now and just run a single unit, it helps a lot more with migraines than flower.

I measured my glass piece I believe it is a 14mm.

Here is a screen shot of my shopping cart. Does it look like I missed anything? Did I get all the right stuff?

 

sixstringsmash

Well-Known Member
You should write or call CH to see when they plan to restock the Sapphire dishes again. I was never able to find a substitute. At least with the SIC version, you don’t have to worry about THERMAL SHOCK….

I just had an email correspondence with Chris at CH about this. He told me they had issues finding a supplier but they have it sorted out now and are hoping to have the first batch of them ready by mid April!
 

Socks And Sandals

Well-Known Member
Well congrats on that but its not a surprise to me as I owned both. The bigger unobstructed dish gives better hits in my opinion and is just easier to use and clean. Having said that the mininail played a role in my life, lol. I've got 3 of the slabpads as I got the on 4/20 sale. I definitely would recommend them. This is one of the other matts/stations:
IMG-E7174.jpg
Very sweet man! Love the set up.

On another note, I got some good news from CH.. 30mm Sapphire Dishes are supposed to be dropped in Mid April according to the correspondence in their chat on their website! Just wanted to let everyone know! I'll be snagging it up for sure and my SIC dish will become a back up!
 

SquirrelMaster

Well-Known Member
Looks like 30mm sapphire dishes are back in stock again at 120.
Cheaper now too ($150 before). I hesitantly expected a price increase tbh.

Part of me was hoping they wouldn't make it in time. Not for anyone else but myself, as 420 is getting expensive this year. I've been waiting a year for all the parts to be in stock so there's no way I'm showing any self restraint 🤣.
 

Socks And Sandals

Well-Known Member
I wish CH had a "Stock Count" next to their items like some online retailers do so I could know if I can wait til 4/20. I'm not sure about how fast these 30mm dishes will go. I guess to be safe, I'll pick one up up now with my 10% off coupon code. Anyone remember how fast these dishes moved the last time? I'm surprised the T - bucket is still in stock.. I jumped the gun to pick that up too thinking it was going to get snatched up in a few days.

My gut instinct says not to wait for 3 days for the sale in the event they could be sold out..
 

Oden

Well-Known Member
I wish CH had a "Stock Count" next to their items like some online retailers do so I could know if I can wait til 4/20. I'm not sure about how fast these 30mm dishes will go. I guess to be safe, I'll pick one up up now with my 10% off coupon code. Anyone remember how fast these dishes moved the last time? I'm surprised the T - bucket is still in stock.. I jumped the gun to pick that up too thinking it was going to get snatched up in a few days.

My gut instinct says not to wait for 3 days for the sale in the event they could be sold out..
In the CH discord, he warned that it was a limited supply.
I ordered mine without thinking too much, after reading this 🤣
 

Circa1999

Well-Known Member
Hey guys so I notice there is a Universal Carb Cap (7027) as well as a Galaxy Enails Carb Cap (9406)

Do you guys know do I need both to use the t-bucket system or can I just buy one or the other?

I'm trying to upgrade/replace my showerhead with a T-Bucket system.

Thanks for the help.
 

The Stray Fox

Separated from the group
Hey guys so I notice there is a Universal Carb Cap (7027) as well as a Galaxy Enails Carb Cap (9406)

Do you guys know do I need both to use the t-bucket system or can I just buy one or the other?

I'm trying to upgrade/replace my showerhead with a T-Bucket system.

Thanks for the help.
One or the other would be fine. I’ve never used the glass one. I’d like to try that one too. I will say the Universal Carb is my least favorite CH carb I’ve tried out of many.
 
The Stray Fox,
  • Like
Reactions: Circa1999
Top Bottom