Growler tube and High Octane, Terrapin Longmont
Watch "Growler tube and High Octane, Terrapin Longmont " on Streamable.
The Angus Halogen Vape by YLL Vape
- Thread starter YLLVAPE OFFICAL
- Start date
Zuhdj
Charles Mingus
JeeeeeezusGrowler tube and High Octane, Terrapin Longmont
Watch "Growler tube and High Octane, Terrapin Longmont " on Streamable.streamable.com
One more week till I can do that too
Highest temp pull. With extra 10 degree boost held down for half the hit. So gotta push it to get real milky IME. Nit that milky is honestly needed for a great hit.
Appreciate the description
There's always ways to make them look good and powerful
Nice to know if it's factory settings or pushed or modded or tricked into the performance - a video with no description doesn't doesn't do this and we don't know if it's a true representation of what something can do using the factory settings/instructions
It's true we often mod lots of our vapes for added performance
But it's likewise nice to know that's what is happening if so
Otherwise people wonder why they aren't getting the results they saw
Like a McDonald's burger picture vs what you get in your hand
EDIT: So this isn't quite using it as it is stock set up. See below for slight mod details. And @ShayWhiteGrow is FC's big hit master.
So his rips are a good demonstration of what is possible. With sufficient technique and lung capacity. And not sure how much the mods might be contributing here too.
So his rips are a good demonstration of what is possible. With sufficient technique and lung capacity. And not sure how much the mods might be contributing here too.
Last edited:
I know who he is and have seen lots of videos
It's still pushing it as you mentioned
The description helps people either know how it works or not be disappointed with their first results
The McDonald's burger usually tastes the same regardless of the picture
But you want what you see
It's highest temp, factory settings, power boost with WPA, I removed the 2 screens, chamber one above the heater, wpa one on back side of the wpa, because I find them useless, it's better for how I hit it.
like a double quarter pounder with cheese.I often take screens out in vapesIt's highest temp, factory settings, power boost with WPA, I removed the 2 screens, chamber one above the heater, wpa one on back side of the wpa, because I find them useless, it's better for how I hit it.
I find some useless or even hinder performance at times
Cheers for that, I can envision exactly what/why you have done so
I'd rather it be like a well cooked steak than a quarter pounder
Both will put you on your backside, but one will will make you feel better than the other and tastes a lot better
They do serve a purpose. They can stay in to give you a more conduction mix with your hit because they are thick screens. I plopped a mighty screen in the chamber to help with crumbs but there is a metal base under the screen, above the Boro balls. Weed can't get through the balls and metal so you're good to remove it if you please. The wpa blocks all the scoobies with its bottom screen, bigger holes, and path up to the glass. I never had a weed crumb yet in my glass with this mod.
CaptBongRipper
Life goes on, man...
To me, that's a bonus for us oldish stoners with arthritic fingers. My TM2 gets pretty warm too and it feels great on my fingers and hands. another therapeutic tool for my arthritic fingers.Holy hot batteries batman ......
It's not too hot with back to back just warm. I never did back to back to back though
Edit: I never hot swapped Batts either is that what's meant by hot batteries? Letem cool brah!
Last edited:
Zuhdj
Charles Mingus
Hot batteries means exactly what it sounds like. Hot swapping is swapping batteries mid session
Well, yea, then they will be hot. High drain
lithium baby! Wear gloves
Edit:
2 of these ghost mv1/GH screens in the vapor path if you use the WPA. These are what I removed before using it. Also takes away the burnt popcorn taste that you get at the end if you leave them in
Last edited:
I've never burnt my finger on a battery
High drain vapes I can pull batteries out no worries - warm yea - hot no
We aren't talking about a warm vape to your arthritic hands
My ALP run at 464 gets quite warm/hot on the hands too, also nice feeling - I can immediately pull the battery out and not play hot potato with it though
I don't get why the mystery around that post as if it was ambiguous
I shared the quote from a user I saw
Pretty explanatory what they had experienced and they like the vape otherwise so it's not a targeted attack
It's a valid thing to raise, whether you find it an issue personally or not - overly hot batteries that burn a finger (or may have other issues as a result) would be something that some people may want to avoid
I've never had a battery get as hot as that described
Rather than just blindly explain it away to sell vapes - and change the original explanation to do so, let people share their experiences and be at peace with it
On a "lighter" note, my friend asked me the other day if the upgrade for this vape would be a hid globe .... Hahaa
Hate those bloody globes on cars, too bright and blind you coming in the opposite direction
I tell you what if they had hit up Angus Young from AC/DC to help market it I would have had to get one just because lol
Imagine a custom Angus signed by Angus.....
High drain vapes I can pull batteries out no worries - warm yea - hot no
We aren't talking about a warm vape to your arthritic hands
My ALP run at 464 gets quite warm/hot on the hands too, also nice feeling - I can immediately pull the battery out and not play hot potato with it though
I don't get why the mystery around that post as if it was ambiguous
I shared the quote from a user I saw
Pretty explanatory what they had experienced and they like the vape otherwise so it's not a targeted attack
It's a valid thing to raise, whether you find it an issue personally or not - overly hot batteries that burn a finger (or may have other issues as a result) would be something that some people may want to avoid
I've never had a battery get as hot as that described
Rather than just blindly explain it away to sell vapes - and change the original explanation to do so, let people share their experiences and be at peace with it
On a "lighter" note, my friend asked me the other day if the upgrade for this vape would be a hid globe .... Hahaa
Hate those bloody globes on cars, too bright and blind you coming in the opposite direction
I tell you what if they had hit up Angus Young from AC/DC to help market it I would have had to get one just because lol
Imagine a custom Angus signed by Angus.....
Fresh new gear by BUFU.. BY US. you know the rest
Zuhdj
Charles Mingus
This looks to be a partial load right?Fresh new gear by BUFU.. BY US. you know the rest
Fine grind that time, bottom of the jyarz, could have gotten a little bit more in there.
Yes it is. Just looks like you're sipping from a hip flask is all
indica.pajamas
Member
it is but i personally feel there are so many better options on the market than YLL
Abele Rizieri Ferrari
Well-Known Member
So you tried Angus already? What are the things you find need improvement?
vandalizedbythelotus
Well-Known Member
not OP but after looking at the cross-section blueprints i would change the following:
wider, less taller bowl: there's a reason most successful vapes and cooking pots look this way (think s&b dosing cap shape), more surface area exposed to heat source and consistent temps inside the bowl. gold plated for pure taste.
i think ideally the bulb should be surrounded with a layer balls on the sides, not just on the top. more heated surface area. alternatively a frit cup over the bulb might be a better radiator option instead of loose balls.
air intake on top or side rather than bottom (like TM or dynavap or FW). the air would enter at bulb level and travel downwards between outer wall and tube, then enter cutouts on bottom of tube, then upwards into bulb etc. would cut cost, free up space inside, make better use of radiant heat, and be completely isolated from any electronics.
top metal plate connecting batteries to oven looks pretty but i suspect conducts heat into the cells from the oven. break it up into distinct segments or eliminate.
Last edited:
Abele Rizieri Ferrari
Well-Known Member
But I was hoping for op to reply, so I could smugly ask them "and what are the so many options that live up to these standards?"
