coolbreeze

Well-Known Member
Just figured i would drop in and tell everyone that I've been 100% smoke free for about a month now. Started Nicotine vaping about a year ago, dry herb vaping 2ish months ago but i couldnt catch a buzz till the DV @Bad Dog got for me, then i havent smoked a thing since lol gunna try and trade my Air 2 for an induction heater. Might be a hard trade, but worth a shot lol just waiting for payday to list :)

Tbh, im in love with my DV. Not as happy with the dent thats formed on my cap though. No drops so i didnt damage it that way, and i can count the number of times ive combust on one hand, so i doubt its from overheating. Regardless, vendor that sold it said they wont do anything cuz it still works. Its click is slowing down as the dent gets worse, which is ok for now as its a 21 M but if it slows down too much more, itll combust before clicking. And i cleaned it well.

Looks like I'll be hunting a new cap soon lol
The cap dent use to be a common thing, caused by the nubs in the cap of the doob toobs DV packed them in pushing the cap into the pointy molding leftover at the bottom of the tube. An alternate cause was sometimes the button in the IH pushing into the cap. In both cases the damage was largely cosmetic for most but some folks did have to replace their caps. Maybe that's why they use the cardboard packages now.

Maybe you'll find one of the older hotter caps and join the dark-roasters!

And congrats on fuckin' combustion!
 
Last edited:

coolbreeze

Well-Known Member
now this thing looks like it will kill a lot of the anvil chatter in the thread :o
Now you'll have to hear us yammer about convection. Also, nice rig--looks excellent for roasting with convection OR conduction! Seriously, though, mine are on their way. Should be fun. Counting down to the first dualie with an anvil and a coppertop on a megaglobe!
Shame he doesn’t show the avb, I’m interested in how evenly vaped the bud will be.
True dat. I heard it stays pretty even, but heck, look at my sources.
 
Last edited:

Demonic chronic

Chronic Connoisseur. Butane power✊🏴󠁧󠁢󠁳󠁣󠁴󠁿🇺🇦
But he did.. His 1st 2 massive rips where done on Discord though.. The avb was still greenish...
Ah, I’m not on social media at all so wouldn’t of seen, just hope it’s vaped evenly or else it will be useless to me. Only bough because I got a few captive with new devices, and the captives are absolute shite compare to the OG caps, so if these work great!, I won’t have to throw captives away:rofl:
 
Last edited:

condition

Well-Known Member
first time I could high temp hit my Dynavap with a hook

Better get a boss cooling rig ^^
Hey, so I have a similar Jhook and an Ehle Water pipe, both 14mm, so I have made a quick research on european market for a WPA for my Omni 2021. I narrowed it to

1. DynaVap Mini Bubbler "Snowman". Obviously not a wpa but a complete bubbler for DV, but mini, so mini that water can end at my mouth?
2. Strong-Arm V2 Universal DynaVap Adapter
3. Dynavap BB9 Glas Stem

Which one you recommend?

@coolbreeze what do you mean by boss cooling rig? A bubbler to use instead of a JHook?
 
condition,

Bad Dog

Yeah I pissed on the rug...... so what
Hey, so I have a similar Jhook and an Ehle Water pipe, both 14mm, so I have made a quick research on european market for a WPA for my Omni 2021. I narrowed it to

1. DynaVap Mini Bubbler "Snowman". Obviously not a wpa but a complete bubbler for DV, but mini, so mini that water can end at my mouth?
2. Strong-Arm V2 Universal DynaVap Adapter
3. Dynavap BB9 Glas Stem

Which one you recommend?

@coolbreeze what do you mean by boss cooling rig? A bubbler to use instead of a JHook?
I have the strong arm, that's it there in the pic full of balls. if your going strong arm I recommend getting the 14 only joint, my multi joint is pretty good, just a slight wobble but the little finger I just bought from them was junk, the 18 and 14 didn't seal and leaked air. I asked for a replacement but they refunded me instead saying they weren't sure a replacement would be any better so it seems the quality of the multi joints isn't good anymore. that or the bb9
 

condition

Well-Known Member
Thanks Bad Dog, 14mm is not available from where I will order. The BB9 is available, but if I put it both on a Jhook, which one you think it will taste better: the Omni 2021 plugged in the Hook/bong or just the tt tip with BB9 acting as a stem and attached to the hook/bong?
 
condition,

Bad Dog

Yeah I pissed on the rug...... so what
Thanks Bad Dog, 14mm is not available from where I will order. The BB9 is available, but if I put it both on a Jhook, which one you think it will taste better: the Omni 2021 plugged in the Hook/bong or just the tt tip with BB9 acting as a stem and attached to the hook/bong?
I don't seem to have the most refined vaping palette, I don't notice a huge difference between hitting my wpa direct and dry or my m stem. the glass is a bit better but its not a night and day change for me. the multi joint could still be a option , if it wobbles you could sand it down with sand paper but it will be a bit of a job. I like the multi strong arm cause its easy to clean and when I fill it with balls I can take them out and really scrub them.
 
Bad Dog,

LAWTHEONE

CLOUDYWITHFOG/ZEROVISIBILITY
The guy who makes the anvil went berserk in his weekly letter what seem to be about Austin‘s full metal jacket. The guy who made the anvil put tons of engineering into the special built tips that are complex and difficult to make.

Austin made a super simple easy to make solution that supposed to produce the same results for only $10. That really seems to piss the Anvil guy off. It sounds like he might have spent a lot of time effort money over engineering something that didn’t need to be. But who knows we’ll see.
 

Vapetothegrave

Vape2thegrave
Company Rep
The guy who makes the anvil went berserk in his weekly letter what seem to be about Austin‘s full metal jacket. The guy who made the anvil put tons of engineering into the special built tips that are complex and difficult to make.

Austin made a super simple easy to make solution that supposed to produce the same results for only $10. That really seems to piss the Anvil guy off. It sounds like he might have spent a lot of time effort money over engineering something that didn’t need to be. But who knows we’ll see.
IMO John himself is who has legitimized the FMJ as a threat to his market share lol. So be it, let the market decide!
 

coolbreeze

Well-Known Member
@coolbreeze what do you mean by boss cooling rig? A bubbler to use instead of a JHook?
I was referring to BD's ball-filled adapter and spiky j-hook. A j-hook should be fine cooling a DV and one with right-angles and spikes would be that much better. On the other hand, a nice, small bong can work well wet or dry.
The BB9 is available, but if I put it both on a Jhook, which one you think it will taste better: the Omni 2021 plugged in the Hook/bong or just the tt tip with BB9 acting as a stem and attached to the hook/bong?
Best would probably be the Omni tip in a glass adapter (BB, strong arm, wpa, etc) because you eliminate the restrictions that make a DV hit nice native, making a more open hit. This is especially important with some percs/recyclers.

These are ideal, if Ed will ship to Europe:
 
Top Bottom