Cheap High Quality Bubbler

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Totally, though remember this thread is technically cheap high quality bubbler haha so a hook does not really count as a water piece, though this is certainly high quality cheap glass! See, this really is a broad glass thread :tup: ... I don't use my hooks as much as I used to, because I have so much glass water pieces now, there are quite a few that I just use dry without water, so they offer a lot of cooling depending on their designs :cool:
 

LesPlenty

Well-Known Member
Company Rep
Totally, though remember this thread is technically cheap high quality bubbler
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
With the goo roo inlines, some holes are on top and some are below the stem, what's the difference?

They offer it both ways, I have mentioned it before, but basically if the holes are pointing down you have the ability to load less water, it should also milk up quicker, and offer a little more draw restriction (also depending on how much water is loaded) with the holes facing up you have to load enough water to cover the top of the holes at least, but you typically get more bubble stacking and easier airflow... So it depends what you are looking for exactly and what you want to use it with? They are both very effective either way, not such a big difference, and there are typically holes on the sides as well, they're not perfect... Mine only has holes on the back of the perk on the top, a few a little on the side at an angle, theres a lot of variance.
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Just gathering info on the inline progress be it holes or slits, the old school or style is facing down, and lately, some modification for user preference facing up made sense bro, Thank you.

Cool cool, yeah you were the one who asked me before didn't you? Yeah there are a lot of different styles, some have slits on either side instead I see a lot too, that's what my original inline honeycomb has, the holes are becoming more common I see, but yeah whichever way they're facing it's not really such a huge difference ultimately??
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I emailed before ordering and they made my large inline with the cuts on the bottom. The small inline is tiny and hardly holds any water. Hard to tell how small it is from the website pics

Yeah for that reason I would actually get the small inline with the holes facing down if possible, so you have the ability to load less water for sure with less volume there, I gave that tip to @AJS when he got his from them, he did a nice Instagram video with the herborizer so could check and confirm which direction they're facing... It is a nice piece, closer to one of the herbo bubblers with small volume, good for flavor, the large inline is a bit big (larger than my inline honeycomb) though the small is quite small, something in between would be cool... Anyway I noticed vgoodiez got the small in stock with the color heady horns instead of a base, pretty cool looking, I just hate that flaring of the mouthpiece personally.
 

AJS

Calm Consistency
Yeah for that reason I would actually get the small inline with the holes facing down if possible, so you have the ability to load less water for sure with less volume there, I gave that tip to @AJS when he got his from them, he did a nice Instagram video with the herborizer so could check and confirm which direction they're facing... It is a nice piece, closer to one of the herbo bubblers with small volume, good for flavor, the large inline is a bit big (larger than my inline honeycomb) though the small is quite small, something in between would be cool... Anyway I noticed vgoodiez got the small in stock with the color heady horns instead of a base, pretty cool looking, I just hate that flaring of the mouthpiece personally.
If you're referring to the same piece I ended up picking up..

Love my piece, my cuts are on the top, no issues at all. I can put it just at level with the slits and it's very even percolation with amazing flavor, or add a bit more and the bubble stack and it's much more cooling.

I will say for a huge hitter like the Herborizer, long drawn out hits get a scratchy heat on my throat, and it's just more coughing in general. I have found a way to appreciate quick thick flavorful milks through this piece instead of long drawn out rips. I can still do both, but I have to be a bit more cautious of technique because the hot air can really hit me with this piece, which I never got with the D020D. I'm sure that would never be an issue with a lot of other vapes, just the high airflow high vapor vapes (and user experience).

Overall, I haven't touched the D020D since (I am a sucker for the newest toy though), and recently gave it away to my brother who just got his first vape (and LSV).

The long mouthpiece adds almost as much glass length as the downstem/can, so that helps cool without compromising any flavor.

If you're after flavor it really is phenomenal. It's really nice watching a smaller piece milk and clearing it with a nice short pull brings in less air and less bong flavor and more dense vapor flavor.
Mine gets dirtier much faster than I'm used to, but since I'm after flavor, I figured I'd clean it often anyway. I clean it daily, and it's about 15 seconds of shaking salt/iso and it's perfect. No tricky spots.

Couldn't be more pleased!

[https://www.instagram.com/tv/Cbozab6j0mt/?utm_medium=copy_link]
 
Last edited:

coolbreeze

Well-Known Member

picked up a factory second halley from the vapexhale sale before it shuts down on the 27th

$26 shipped if anyone else is interested. some chips on the mouthpiece but it looks like a very nice piece
I bought that on impulse 🤷‍♂️
Wait 'til you try this with a Couch Log...
 
Last edited:

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)

DhGate Bowle

Haha yeah I shared that one here before, in the bowle thread too I think, also tried to order one but they said can only do bulk orders, it actually looks like a fun piece!
 

bossman

Gentleman Of Leisure
Wait 'til you try this with a Couch Log...
That sounds great. I'd been keeping my powder dry for the CouchLog drop and then the Anvil was available first and... I don't remember anything after that. 😂

Do you have an Anvil yet? I thought I'd be annoyed by the long torch time but seeing as how it's the hardest hitting vape I've ever used I'll have to just try some different torches. It's unparalleled what the Anvil can do with maybe a vapcap worth of weed.

I'm still hoping that little recycler is fun with it since I don't own any 14F glass. 🤞 My other options at the moment are the gooroo large inline and the dusty old D020-D, both with a reducer.
 
Last edited:

coolbreeze

Well-Known Member
That sounds great. I'd been keeping my powder dry for the CouchLog drop and then the Anvil was available first and... I don't remember anything after that. 😂

Do you have an Anvil yet? I thought I'd be annoyed by the long torch time but seeing as how it's the hardest hitting vape I've ever used I'll have to just try some different torches. It's unparalleled what the Anvil can do with maybe a vapcap worth of weed.

I'm still hoping that little recycler is fun with it since I don't own any 14F glass. 🤞 My other options at the moment are the gooroo large inline and the dusty old D020-D, both with a reducer.
Nice. I am still on the list waiting (I hope) for an Anvil, but I couldn't wait for the CL. My understanding is that they've opened the Anvil's draw a bit with the new iteration, so it ought to recycle fine. I don't think the torch times will bother me too much. I've got a pb-207 and the blazer pen torch I'll try first.

That recycler is actually pretty good size and holds ~300+ml, iirc, but it's totally hand-holdable. I love this thing, even if the glass is a little thin and everything is a little crooked. It cools, adds moisture, and presents flavor well. The killer feature for me though is that it places your torch vape just where you want it if your eyes are age-challenged.

It should be great, but the other two seem like great choices as well. Betcha the GooRoo will cool things right down.

Also, the CL is fantastic, and it too hits far harder than you think it should. Never had flavor this good, high is really very powerful. It's a full-strength ball vape in a little wooden heat shield.

Enjoy that Anvil/Halley combo and let us hear how it turns out! Or show us, better still!

young thug space GIF by WERQ Fitness
 
Last edited:

coolbreeze

Well-Known Member
My final Vapexhale order arrived. The precision hydrabomb is like the smoothest thing I've ever hit. It's like vaping a feather wrapped gently in a cloud floating on a puff of air. It supposedly has a wobble (I thought they meant that the joint was too large, but maybe they meant the base was not flat?) Anyhow, I can't really find the wobble.

They also sent a Calyx freebie and a Helio freebie! The Calyx has a pronounced wobble, but I use them on a base or Hydrobrick, so they kinda float and don't need to sit flat.

I also got one of the Connect adapters because why not and a Crown Hydratree. The Hydratree is much smaller than I thought, and it looks super smooth. Gonna try that one next!

Hate to see these guys go, since I've loved their glass. Funny, some of my favorite glass comes from a vape company (XHL) and some of my favorite vapes come from a glass company (7th Floor)!
 
Last edited:

bossman

Gentleman Of Leisure

picked up a factory second halley from the vapexhale sale before it shuts down on the 27th

$26 shipped if anyone else is interested. some chips on the mouthpiece but it looks like a very nice piece
Got the Halley today and so far the Anvil wasn't open enough for it to recycle, although function was good with no vape on it. I'll try again tomorrow with adjusted airflow and not packing tightly.

I mistakenly presumed the mouthpiece chip (a gnarly little angle like a missing tooth) would be sanded smooth or something so that's an added wrinkle. It looks like it should be filled more than filed/sanded. It's also barely outside of where your lips would touch the flared mouthpiece so I'm wondering if an approach like this is in order:

 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
So vgoodiez started their 420 sale with a fresh stock of GooRoo glass 10% off btw

I also ordered some 10 mm bangers (and a 14 mm or two) from here because the one I got from Goo does not seal in any of my 10 mm lol emailed them, but no response yet...
 

androponic

vaped.
So vgoodiez started their 420 sale with a fresh stock of GooRoo glass 10% off btw

I also ordered some 10 mm bangers (and a 14 mm or two) from here because the one I got from Goo does not seal in any of my 10 mm lol emailed them, but no response yet...
thanks for that! just grabbed the GR HD3 from VGoodiez. free shipping and 10% off, yes please. Hopefully i can remove that logo.
 

whatitdew

Vapes R Great
Does anybody use 10mm pieces with enail injector type vapes??

Im looking at buying a nice glass piece for flowerpot/Halo/Anvil type vapes
most of the glass pieces I’ve seen around I liked tend to be small rigs 10mm joints

I have weak lungs so the bigger pieces are sometimes too much work for me.

im also interested in Recyclers but not sure if they normally require more lung function to get “recycling“ good

whats your favorite style for injectors (besides the SP globe)
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Does anybody use 10mm pieces with enail injector type vapes??

Im looking at buying a nice glass piece for flowerpot/Halo/Anvil type vapes
most of the glass pieces I’ve seen around I liked tend to be small rigs 10mm joints

I have weak lungs so the bigger pieces are sometimes too much work for me.

im also interested in Recyclers but not sure if they normally require more lung function to get “recycling“ good

whats your favorite style for injectors (besides the SP globe)

I've never seen an injector bowl that is 10 mm, I think that would be too small, and restrict the airflow, and yes there is such thing as a piece that is too small, 14 mm pieces don't have to be big at all, you can still get a small piece... A recycler requires a more constant faster pull for proper function typically along with good airflow... I also wouldn't recommend a globe regardless. What is your price range, what are some examples of the pieces that you like??
 

RustyOldNail

SEARCH for the treasure...
Does anybody use 10mm pieces with enail injector type vapes??

Im looking at buying a nice glass piece for flowerpot/Halo/Anvil type vapes
most of the glass pieces I’ve seen around I liked tend to be small rigs 10mm joints

I have weak lungs so the bigger pieces are sometimes too much work for me.

im also interested in Recyclers but not sure if they normally require more lung function to get “recycling“ good

whats your favorite style for injectors (besides the SP globe)

Weak lungs.... forget RECYCLERS.....
 
Top Bottom