• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

nopartofme

Over the falls, in a barrel
Hi! I haven't been here in a really long time.

Not so long ago I moved halfway across the country, and it wasn't until afterward that I learned DynaVap is located "in my backyard" relatively speaking. They'd been on my radar since back when I haunted this place on a daily basis.

After several months enjoying a rosium VapCap M, I purchased an Apollo 2 which I also very much enjoyed. After a few months it died on me, so I got in touch with DynaVap for a replacement. After a mixed up day, I bungled some scheduling which resulted in a sort of surprise visit to their offices. The result was a full tour behind the scenes, and the opportunity to meet a lot of nice people working there. Even some stickers and more to take home!

Needless to say, I've become a big fan of these folks. Coming from the Vapman, I really think that every Vapman owner should have a VapCap and every VapCap owner should have a Vapman! TEDs for life.

Cheers
- nopart
 

vandalizedbythelotus

Well-Known Member
Exactly! And every Vapcap owner should have a Sticky Brick, so I guess every Sticky Brick owner should also have a Vapman, and...

anyhow, Happy VASmas and a foggy New Year!
those 3 are perfect together. way i see they are the small, medium and large serving of butane vapes. i went with lamart's Piro instead of the Sticky Brick due to proximity and size of the device.
 

Exsmoker

Plant Manager
Santa brought me a shiny new Vong 21 for Christmas! It’s a lot prettier than my old Nonavong and has a nice weight. I think it will last awhile. There were a couple of things that I didn’t like though.

The air-hole adjustment was too loose. The body would spin freely causing the air hole to open or close with normal handling. I didn’t see any way to tighten it or lock it place, so I set it to where I wanted and slipped a piece of heat shrink tubing over the parts that turn, and heated the tubing enough to hold things snuggly in place. Not a big deal but for the price I think it could be designed better.

And I’m not impressed with the new captive cap, unless I want to do 10 heat cycles with wispy hits to finish a load, but I like to take bigger hits in a water piece. I assume the looseness of these new caps doesn’t transfer heat like the old caps. I replaced it with a regular cap and it now works like gangbusters.

Original
4927EE25-7701-4C57-9D06-A1F9FCA3C03C.jpeg

After installing the tubing and and replacing the cap.
E126DE83-C6F9-4F64-9B88-70A0E2C919A7.jpeg
 

TheThriftDrifter

Land of the long vapor cloud
Not sure this helps, but I read a couple recent complaints on r/dynavap about newer vongs (the Cocobolos were just landing) being 'loose' and one guy noticed a small gap between the wood and one Ti end or the other. He solved it by simply pressing the top and bottom of the body together a bit and achieving a normal fit. I'd suggest searching over there and seeing if there's additional advice.

I've recommended standing the Vong on end and whacking the top of it with a book. Use a book you don't like. It is a simple crimp and someone just didn't give it enough umph.

@Exsmoker
 

vandalizedbythelotus

Well-Known Member
Santa brought me a shiny new Vong 21 for Christmas! It’s a lot prettier than my old Nonavong and has a nice weight. I think it will last awhile. There were a couple of things that I didn’t like though.

The air-hole adjustment was too loose. The body would spin freely causing the air hole to open or close with normal handling. I didn’t see any way to tighten it or lock it place, so I set it to where I wanted and slipped a piece of heat shrink tubing over the parts that turn, and heated the tubing enough to hold things snuggly in place. Not a big deal but for the price I think it could be designed better.

And I’m not impressed with the new captive cap, unless I want to do 10 heat cycles with wispy hits to finish a load, but I like to take bigger hits in a water piece. I assume the looseness of these new caps doesn’t transfer heat like the old caps. I replaced it with a regular cap and it now works like gangbusters.

Original
View attachment 15574

After installing the tubing and and replacing the cap.
View attachment 15575
the parts are pressfit together. took off the tip and pushed it down into my not cocobolo desk vertically from the mouthpiece end when it felt too loose.
 

Exsmoker

Plant Manager
the parts are pressfit together. took off the tip and pushed it down into my not cocobolo desk vertically from the mouthpiece end when it felt too loose.
The problem is now fixed. I stood it up and tried smacking it with a book but that didn’t do much, so I grabbed a rubber hammer and that took care of it! There was a small gap at the mouthpiece end that’s no longer there, and the air adjustment is now tighter and useable.

Thanks to all who shared the solution.
 

whatitdew

Vapes R Great
Personally, I despise logos to the point where I will go out of my way to get unbranded devices whenever I can:
nologo.jpg

That's a Herb Ripper, O'Connell Woodworks Travel Debowler and Flower Mill that I specifically contacted the manufacturers to make without branding.

Even with this mindset, I find it hard to complain about the appearance of fully functioning vaporizers given out by a company. Yes, Karmavaps, Ms for Friends and even C-Vaps are marketing tools and advertising not "gifts" in the strictest sense, but I mean, why wouldn't they try to realize some value for their business while giving away product for free?

I can think of instances where free Dyncoils, stems, quite recently Induction Heaters, and a metric tonne of 7-fin tips being given out with no expectation from Dynavap for recipients to do anything other than use the products how they saw fit. They've been more than generous towards their customer base and I think they've earned some leeway despite some truly horrendous looking branding on those freebies, but that's just my opinion.



how do you like the travel de bowler?
I’ve thinking about getting one made up, myself
 
whatitdew,

TommyDee

Vaporitor
The problem is now fixed. I stood it up and tried smacking it with a book but that didn’t do much, so I grabbed a rubber hammer and that took care of it! There was a small gap at the mouthpiece end that’s no longer there, and the air adjustment is now tighter and useable.

Thanks to all who shared the solution.
Bigger book ;] Glad you got it sorted.
 

Ganjora

Well-Known Member
wrt the captive cap: squeeze it on the digger outer and the opposite side of the opening.
this will effectively make it a non captive cap and it should work fine.
bought a used 2020 M and am currently using it exclusively, entirely satisfactorily, with this solution.
 

The Stray Fox

Separated from the group
Is your Revolve out on loan?
Just out in the cold. It’s got a hot tip on it which helps get bigger rips when I’m forced to vape out there. Vaping in the cold changes the variables. You really notice it vaping on something like the CH B-1.

Having another Revolve on the way, I did almost give the Revolve to my brother over Christmas. After thinking about it my thoughts lead to, why would I do that?. I gave him some clothes and a Boundless CFV I won.
 

stonedmallone

Well-Known Member
Just out in the cold. It’s got a hot tip on it which helps get bigger rips when I’m forced to vape out there. Vaping in the cold changes the variables. You really notice it vaping on something like the CH B-1.

Having another Revolve on the way, I did almost give the Revolve to my brother over Christmas. After thinking about it my thoughts lead to, why would I do that?. I gave him some clothes and a Boundless CFV I won.
How you liking your revolve? I'm patiently waiting for mine!
 

Timps27

Feel like I’m winnin’ when I’m losin’ again
Just picked up the SABR quad flame, mostly because it looked cool. Turned out to be an absolute game changer for me. Most torches and heaters I find myself having to dial in my PCT (post click time) which introduces inconcistency back into the process the click was designed to solve. With this quad flame I’ve found it penetrates perfect for my style right at the click, I can actually use my vap cap as it was designed! I hear the click and I stop!

 

The Stray Fox

Separated from the group
How you liking your revolve?
Really enjoying it. It has more features than I need but who knows one day I might need them. I’ve been running it in water pipe mode, air port closed and vapor traveling through the cooling unit, and it’s pretty gunked up. So much so that I can’t spin the air port adjustment when it’s cold. It’s fine when it warms up.
 
The Stray Fox,

cybrguy

Putin is a War Criminal
Are you using it with the screen or without? As I understand it the screen collects some of the honey to keep it from getting clogged as quickly. Brenyo has recommended that the screen be put in the bowl and vaped. :)
 
cybrguy,

The Stray Fox

Separated from the group
Are you using it with the screen or without?
With the screen. It does a great job at grabbing the particulates but the honey still condensates on the cooling unit making it gooey. The innards stay considerably cleaner when compared to something like a Vortex.

I have a number of stems that work great with a screen before a intercooler/cooling unit. Here is a Kings Stem, RWW condenser/CU, and a DDave Dynavap screen installed. D962DEE8-E0A2-4C77-BDBB-5DD2E8344048.jpegYou need to maintain the screen or obviously or it clogs eventually.
 

TheThriftDrifter

Land of the long vapor cloud
So I notice the new tips only have one choice of scoring inside so it is either a full tip or about a 1/3 tip. There used to be 3 positions including one right off the bottom that allowed a tiny bit of clearance. I liked it better when there were more choices...

Not sure if I'm remembering this right, I think the 2020M and maybe some of the Ti tips had more than two settings? But I'm not certain about this. Perhaps someone else has these answers......
 
TheThriftDrifter,
Top Bottom