Anvil by Vestratto

PlanetHaze

Don't Vaporize The Planet !, Vaporize Yourself
Retailer
Case to carry in??

We are going to be starting pre-orders on or about Monday November 8, 2021. Shipping is expected in under 2 weeks from order date. The pre-order kit will be at a special price of 199.95 USD and includes:
  • 1 x Anvil CopperCore Vaporizer
  • 1 x Terp Full Size Herb Chamber
  • 1 x Terp Half Size Herb Chamber
  • 1 x Magnetic Stand
These are limited supply so if you are considering getting an Anvil, please order early to take advantage of this introductory offer. Follow this thread to receive announcements of pre-order launch.

@hoyo77 Cases and such will be available at a later time. This is a pre-order special and contains only what is listed at a discounted price. These are for all the early adopters who have already signed up to be notified when they can buy one. If you need a case, we suggest waiting until later in the new year when full kits become available. :peace:
 
Last edited:

anasrzi

Well-Known Member
It’s no surprise the Anvil also delivers with concentrates. The best DIY setup I’ve found so far is by cutting two screens so they can folded in half and put in the bowl. You then sandwich your dab in one of the screens, put that in the bowl first then put the other screen atop it. You can’t put much in, maybe .03-.05 but like bud it vaporizes it in one hit.


F72-E0-B27-63-A4-4-CF8-AFA9-E35104-FC3486.jpg


Here’s the results from cold heating the bottom copper ring directly.

Is that video linked in using the concentrates @PaperClouds or herb? Sounds like the mesh works pretty well, I'd like those linx pads suggested by @PlanetHaze a bit more tho.
 
anasrzi,

Planck

believes in Dog
Looks impressive.
@PlanetHaze is it decided what the final release will include and the price?
How much is the pre release being discounted?
 
Planck,

PlanetHaze

Don't Vaporize The Planet !, Vaporize Yourself
Retailer
Looks impressive.
@PlanetHaze is it decided what the final release will include and the price?
How much is the pre release being discounted?

We only have the info provided 2 posts above. Full pricing, kit contents, drop dates, accessory pricing etc. will be provided as they become available.
 

PaperClouds

Well-Known Member
Well folks here’s the moment some of you have been waiting for, a head to head with not one but two heavy weights. A few things to note, the Anvil was heated from cold, it was not pushed to its limit and each vape is packed to its optimal fill level.

EDIT: I wanted to add that the Anvil is using the half bowl with a capacity of .07g at the most, these were full so I'd say they're right around that .06-.07g mark.

First up the Anvil vs the Supreme V3 at 390F

Second is the FlowerPot Showerhead with the carb cap on top set at 620F.
 
Last edited:

PlanetHaze

Don't Vaporize The Planet !, Vaporize Yourself
Retailer
Will the preorder be on this forum/DMs or on your planethaze site?

Anvil Pre-Order
Thanks to everyone on FC for all your interest and awesome support of the Anvil. Today was our planned pre-order date so we could ship and have the first production Anvils in customers hands to enjoy this US Thanksgiving. As most launches go, we were too excited and ambitious with our plans. In the early hours of Saturday morning, we crashed our main CNC machine while machining the herb chambers. We had an error in the code that got overlooked and the machine drove its spindle into the rotating material and destroyed itself, sounded like a big car crash.

Repair technicians are already booked, but this will set us back a few weeks for the assessment, parts ordering, installation and calibration. We don't currently have a new pre-order date, but new goal is Anvils for Christmas.


Well folks here’s the moment some of you have been waiting for, a head to head with not one but two heavy weights. A few things to note, the Anvil was heated from cold, it was not pushed to its limit and each vape is packed to its optimal fill level.

First up the Anvil vs the Supreme V3 at 390F

Second is the FlowerPot Showerhead with the carb cap on top set at 620F.

@PaperClouds Awesome side by side videos. The Anvil sure is a cloud monster, looks like it was the only one where the vapor was so thick that you couldn't see the inner glass tube. We get a lot of pm's and dm's asking if the Anvil's clouds are smoke or really vapor. Yes, every video we have posted of the Anvil is pure vapor, no combustion. To prove it, we will be holding a Whitewall Challenge for all the pre-order Anvil customers with prizes and bragging rights. Keep watching this thread for more info. :peace:
 
Last edited:

Justpassedu

Well-Known Member
Anvil Pre-Order
Thanks to everyone on FC for all your interest and awesome support of the Anvil. Today was our planned pre-order date so we could ship and have the first production Anvils in customers hands to enjoy this US Thanksgiving. As most launches go, we were too excited and ambitious with our plans. In the early hours of Saturday morning, we crashed our main CNC machine while machining the herb chambers. We had an error in the code that got overlooked and the machine drove its spindle into the rotating material and destroyed itself, sounded like a big car crash.

Repair technicians are already booked, but this will set us back a few weeks for the assessment, parts ordering, installation and calibration. We don't currently have a new pre-order date, but new goal is Anvils for Christmas.




@PaperClouds Awesome side by side videos. The Anvil sure is a cloud monster, looks like it was the only one where the vapor was so thick that you couldn't see the inner glass tube. We get a lot of pm's and dm's asking if the Anvil's clouds are smoke or really vapor. Yes, every video we have posted of the Anvil is pure vapor, no combustion. To prove it, we will be holding a Whitewall Challenge for all the pre-order Anvil customers with prizes and bragging rights. Keep watching this thread for more info. :peace:
I been following and signed up to be notified. Sorry that happened but hope you guys get up and running again shortly .
 

PlanetHaze

Don't Vaporize The Planet !, Vaporize Yourself
Retailer
I been following and signed up to be notified. Sorry that happened but hope you guys get up and running again shortly .

Thanks for the well wishes @Justpassedu It was pretty scary, good thing the machine has safety lock-outs and needs to be closed to operate and keep all flying shrapnel inside. Anvil will just be delayed a little. ⏳
 

PlanetHaze

Don't Vaporize The Planet !, Vaporize Yourself
Retailer
Sorry to hear. Many lucks getting it all working again. I've been chomping at the bit for this one

Thanks so much for the well wishes. We will finish the Anvil product page to be up for tomorrow. Pre-orders won't be activated yet, but the product page will have more info available on it.

Are there any videos anyone would like to see of the Anvil? 📺
 

PPN

Volute of Vapor
After to see that thread I tried something:
took a glass one-hitter, a stainless steel cylinder which fits the one-hitter and a glow capsule loaded into, I heat it with a double torch for 12-15s and can get similar results than shown in the halloween video! I'm not claiming my quick idea to be better or even comparable to the Anvil, I'm just glad it worked :tup:
 

PlanetHaze

Don't Vaporize The Planet !, Vaporize Yourself
Retailer
I'm interested in a RTL small bowl. The big one looks possibly too much for little ol me

Hi @Clapped_r6 what is a RTL small bowl? Do you mean you would like to see a video of a Straight Walled Half Size Chamber?


(Sorry! I have been dying to post this since the thread started. Toronto’s own!)

Lol, that is awesome. There was even a Documentary made about them on Netflix. Thanks for sharing. :peace:
 
PlanetHaze,

Justpassedu

Well-Known Member
Thanks for the well wishes @Justpassedu It was pretty scary, good thing the machine has safety lock-outs and needs to be closed to operate and keep all flying shrapnel inside. Anvil will just be delayed a little. ⏳
See you are back up and running again , that was quick . Glad it all works out . When do you expect preorder emails to go out ? Ty
 

PlanetHaze

Don't Vaporize The Planet !, Vaporize Yourself
Retailer
See you are back up and running again , that was quick . Glad it all works out . When do you expect preorder emails to go out ? Ty

Yes, we got lucky. Looks like CNC's have some protections built in against operator mistakes. A coupling let go that just had to be popped back in like a dislocated shoulder and everything aligned and calibrated. Guess this close call puts an end to Anvil testing while programming machines :hmm:

Pre-Order page is active but you can just join a waitlist to be notified as soon as Anvils drop and pre-orders open up. Anvil Vaporizer Pre-Ordering
 
Last edited:

Justpassedu

Well-Known Member
Yes, we got lucky. Looks like CNC's have some protections built in against operator mistakes. A coupling let go that just had to be popped back in like a dislocated shoulder and everything aligned and calibrated. Guess this close call puts an end to Anvil testing while programming machines :hmm:

Pre-Order page is active but you can just join a waitlist to be notified as soon as Anvils drop and pre-orders open up. Anvil Vaporizer Pre-Ordering
Glad that was a easy 1, yeah I joined the wait list on your Instagram page , been patiently waiting for a email back on when I can pre-order , just don't want to miss out. Also will there be other options other than the polished natural when we can pre-order ?
 

PlanetHaze

Don't Vaporize The Planet !, Vaporize Yourself
Retailer
Will there be other options other than the polished natural when we can pre-order ?

Black might be ready on time. We don't want to promise anything that isn't already ready and have anymore launch delays. Anodized Heat Shields will be available as a stand alone product in a bunch of colors, so you can change colors of your Anvil anytime. :rockon:

Are there any FC discounts on preorders?

...I am a die hard, long time Omni user and cant help but be interested.

Pre-Orders are already discounted so there won't be any additional discounts. Anvils have a lot of advanced manufacturing processes, many of which are very costly and need to be very precise. Our current pre-order price is less than the cost to manufacture the Anvil 100% in Canada. As batch sizes increase, we hope to lower our cost through economies of scale.

mod note: edited to remove comparison
 
Last edited by a moderator:

PaperClouds

Well-Known Member
Back again! This time to talk about the full blow which takes this device to an entirely different level. Using ground material thing produces insanely thick vapor, some of thickest vapor I've really ever seen. Even whole nugs produce really thick vapor which once again reminds of Supreme. Anyways!

Here's a side by side comparison with the half bowl.
AnvilBowl.jpeg

This is the full bowl with ground herbs.

Here is it with whole nugs

WholeNug.jpeg

Forgot to take a picture of the ground ABV but it was just as even as the half bowl. Above is the results of the whole nug bowls, the nug in the back was broken down to show the inside while the one in the front was kept whole.
 

kanal

Well-Known Member
Yes, we got lucky. Looks like CNC's have some protections built in against operator mistakes. A coupling let go that just had to be popped back in like a dislocated shoulder and everything aligned and calibrated. Guess this close call puts an end to Anvil testing while programming machines :hmm:

Pre-Order page is active but you can just join a waitlist to be notified as soon as Anvils drop and pre-orders open up. Anvil Vaporizer Pre-Ordering
Most probably you are aware of this, but just to be sure -> currently the links to the different herb chambers are just going to the "start page"

Will there also be a package that contain all chambers? so both the full- and the half- straight bowl and also the helix ones?
 
Top Bottom